Vitrification has been widely used for oocyte cryopreservation, but there is still a need for optimization to improve clinical outcomes. In this study, we compared the routine droplet merge protocol with modified multi-gradient equilibration vitrification for cryopreservation of mouse oocytes at metaphase II. Subsequently, the oocytes were thawed and subjected to intracytoplasmic sperm injection (ICSI). Oocyte survival and spindle status were evaluated by morphology and immunofluorescence staining. Moreover, the fertilization rates and blastocyst development were examined in vitro. The results showed that multi-gradient equilibration vitrification outperformed droplet merge vitrification in terms of oocyte survival, spindle morphology, blastocyst formation, and embryo quality. In contrast, droplet merge vitrification exhibited decreasing survival rates, a reduced proportion of oocytes with normal spindle morphology, and lower blastocyst rates as the number of loaded oocytes increased. Notably, when more than six oocytes were loaded, reduced oocyte survival rates, abnormal oocyte spindle morphology, and poor embryo quality were observed. These findings highlight that the vitrification of mouse metaphase II oocytes by the modified multi-gradient equilibration vitrification has the advantage of maintaining oocyte survival, spindle morphology, and subsequent embryonic development.

Aerospace represents the development of national science and technology. It is an important foundation for exploring space and an important guarantee for the construction of aerospace power. There are many large workpieces in the aerospace field. The box insulation layer of large workpieces is an important processing problem. A new thick processing equipment is proposed to process the box insulation layer of large workpieces. The thick processing equipment consists of the XYZ shaft long guide rail and five degrees of freedom (5-DOF) RAPA. The mechanical structure of the 5-DOF RAPA is a redundantly actuated parallel mechanism (RAPM). Meanwhile, this paper proposes a new method to design 5-DOF redundantly actuated parallel mechanisms (RAPMs) with large output rotational angles. Based on configuration evolution and Li group, two articulated moving platforms (AMPs) and four kinds of limbs are designed, and a series of 3T2R (T represents translation, R represents rotation) RAPMs and 2T3R RAPMs are synthesized. To verify the designed RAPMs with large angle, an example of RAPMs, 4UPS-{2UPR}-R is analyzed. To ensure that the RAPM has no mechanism vibration impact in movement, this paper represents the RAPM adopts a newly proposed trajectory planning method. The results show that the 4SPU-(2UPR)R mechanism possesses large angles and verifies the efficiency of the new proposed trajectory planning method in simplified trajectories. This work lays the foundation for processing the box insulation layer of large workpieces with straight lines and arcs paths.

The vortex dynamics and the structural load in a step cylinder (consisting of a small, d, and a large, D, cylinder) flow are investigated numerically at Reynolds number ($Re_D$) 150 for diameter ratios $D/d=2.0, 2.4$ and 2.8. First, the formation mechanism of a non-uniform oblique vortex shedding (the vortex shedding frequency remains unchanged as the oblique shedding angle varies) behind the small cylinder is explained: an increase in the production rate of the vortex strength and a farther downstream movement of the vortex formation position occur simultaneously as the vicinity of the step is approached along the small cylinder. Second, the structural load (the drag and lift) along the step cylinder is investigated, where four local extremes (two local minima and two local maxima) are observed. An in-depth investigation of the vortex dislocation effects on the structural load is provided, showing that the decreased circulation in the near wake and the weakened staggered Kármán vortex shedding pattern cause a major reduction (90 %) of the sectional lift amplitude and a relatively modest reduction (5.7 %) of the sectional drag amplitude, compared with the corresponding sectional force when no vortex dislocation occurs. This new knowledge combined with the three-dimensional effect of the step cylinder wake (caused by the blending of the small and larger cylinder wakes around the step) explain the formation of the four local extremes and the distribution of the structural load between them. Finally, it is found that the increasing $D/d$ amplifies the structural load variation along the step cylinder.

The random distributed-feedback fiber laser (RFL) is a new approach to obtain a high-power stable supercontinuum (SC) source. To consider both structure simplification and high-power SC output, an innovative structure achieving a kilowatt-level SC output in a single-stage RFL with a half-open cavity is demonstrated in this paper. It consists of a fiber oscillator, a piece of long passive fiber and a broadband coupler, among which the broadband coupler acting as a feedback device is crucial in SC generation. When the system has no feedback, the backward output power is up to 298 W under the pump power of 1185 W. When the feedback is introduced before the pump laser, the backward power loss can be reduced and the pump can be fully utilized, which could promote forward output power and conversion efficiency significantly. Under the maximum pump power of 1847 W, a 1300 W SC with spectrum ranging from 887 to 1920 nm and SC conversion efficiency of 66% is obtained. To the best of our knowledge, it is the simplest structure used for high-power SC generation, and both the generated SC output power and the conversion efficiency are highest in the scheme of the half-opened RFL output SC.

This paper proposes a low-divergence method to generate inhomogeneous and anisotropic turbulence. Based on the idea of correlation reconstruction, the proposed method uses the Cholesky decomposition matrix to re-establish turbulence correlation functions. This is in contrast with the time-consuming procedure used in conventional methods to solve eigenvalues and eigenvectors in each location required by coordinate transformation, thereby reducing the computational complexity and improving the efficiency of synthetic turbulence generation. The proposed method is based on the classical spectrum-based method that is widely used to generate homogeneous and isotropic turbulence. By adjusting the generation strategy of specific random vectors, inhomogeneous and anisotropic turbulence with a relatively low divergence level can be obtained in practice, with almost no additional computational burden. Two versions of the proposed method are presented: the inverter and shifter versions. Both the versions are highly efficient, easy to implement, and compatible with high-performance computing. This method is also suitable for providing high-quality initial or boundary conditions for scale-resolving turbulence simulations with large grid numbers (such as direct numerical simulations or large eddy simulations); it can be rapidly implemented using various open-source computational fluid dynamics codes or common commercial software.

There are many deviation sources in the assembly process of aircraft complex thin-walled structures. To get important factors that affect quality, it is crucial to diagnose the key deviation resources. The deviation transfer between deviation sources and assembly parts has the characteristics of small sample size, nonlinearity, and strong coupling, so it is difficult to diagnose the key deviation sources by constructing assembly dimension chains. Therefore, based on the deviation detection data, transfer entropy and complex network theory are introduced. Integrating the depth-first traversal algorithm with degree centrality theory, a key deviation diagnosis method for complex thin-walled structures is proposed based on weighted transfer entropy and complex networks. The application shows that key deviation sources that affect assembly quality can be accurately identified by the key deviation source diagnosis method based on complex networks and weighted transfer entropy.

Environment-induced epigenetics are involved in diapause regulation, but the molecular mechanism that epigenetically couples nutrient metabolism to diapause regulation remains unclear. In this study, we paid special attention to the significant differences in the level of N6-adenosine methylation (m6A) of dihydroxyacetone phosphate acyltransferase (DHAPAT) and phosphatidate phosphatase (PAP) genes in the lipid metabolism pathway of the bivoltine silkworm (Bombyx mori) strain Qiufeng developed from eggs incubated at a normal temperature (QFHT, diapause egg producer) compared to those from eggs incubated at a low temperature (QFLT, non-diapause egg producer). We knocked down DHAPAT in the pupal stage of the QFLT group, resulting in the non-diapause destined eggs becoming diapausing eggs. In the PAP knockdown group, the colour of the non-diapause destined eggs changed from light yellow to pink 3 days after oviposition, but they hatched as normal. Moreover, we validated that YTHDF3 binds to m6A-modified DHAPAT and PAP mRNAs to promote their stability and translation. These results suggest that RNA m6A methylation participates in the diapause regulation of silkworm by changing the expression levels of DHAPAT and PAP and reveal that m6A epigenetic modification can be combined with a lipid metabolism signal pathway to participate in the regulation of insect diapause traits, which provides a clearer image for exploring the physiological basis of insect diapause.

We present the third data release from the Parkes Pulsar Timing Array (PPTA) project. The release contains observations of 32 pulsars obtained using the 64-m Parkes ‘Murriyang’ radio telescope. The data span is up to 18 yr with a typical cadence of 3 weeks. This data release is formed by combining an updated version of our second data release with $\sim$3 yr of more recent data primarily obtained using an ultra-wide-bandwidth receiver system that operates between 704 and 4032 MHz. We provide calibrated pulse profiles, flux density dynamic spectra, pulse times of arrival, and initial pulsar timing models. We describe methods for processing such wide-bandwidth observations and compare this data release with our previous release.

The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration (LDPA) and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources. The successful use of the SG-II Peta-watt (SG-II PW) laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility. Recently, the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source, laser contrast and terminal focus. LDPA experiments were performed using the maintained SG-II PW laser beam, and the highest cutoff energy of the proton beam was obviously increased. Accordingly, a double-film target structure was used, and the maximum cutoff energy of the proton beam was up to 70 MeV. These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.

The association between time-restricted eating (TRE) and the risk of non-alcoholic fatty liver disease (NAFLD) is less studied. Moreover, whether the association is independent of physical exercise or diet quality or quantity is uncertain. In this nationwide cross-sectional study of 3813 participants, the timing of food intakes was recorded by 24-h recalls; NAFLD was defined through vibration-controlled transient elastography in the absence of other causes of chronic liver disease. OR and 95 % CI were estimated using logistic regression. Participants with daily eating window of ≤ 8 h had lower odds of NAFLD (OR = 0·70, 95 % CI: 0·52, 0·93), compared with those with ≥ 10 h window. Early (05.00–15.00) and late TRE (11.00–21.00) showed inverse associations with NAFLD prevalence without statistical heterogeneity (Pheterogeneity = 0·649) with OR of 0·73 (95 % CI: 0·36, 1·47) and 0·61 (95 % CI: 0·44, 0·84), respectively. Such inverse association seemed stronger in participants with lower energy intake (OR = 0·58, 95 % CI: 0·38, 0·89, Pinteraction = 0·020). There are no statistical differences in the TRE-NAFLD associations according to physical activity (Pinteraction = 0·390) or diet quality (Pinteraction = 0·110). TRE might be associated with lower likelihood of NAFLD. Such inverse association is independent of physical activity and diet quality and appears stronger in individuals consuming lower energy. Given the potential misclassification of TRE based on one- or two-day recall in the analysis, epidemiological studies with validated methods for measuring the habitual timing of dietary intake are warranted.

As a typical plasma-based optical element that can sustain ultra-high light intensity, plasma density gratings driven by intense laser pulses have been extensively studied for wide applications. Here, we show that the plasma density grating driven by two intersecting driver laser pulses is not only nonuniform in space but also varies over time. Consequently, the probe laser pulse that passes through such a dynamic plasma density grating will be depolarized, that is, its polarization becomes spatially and temporally variable. More importantly, the laser depolarization may spontaneously take place for crossed laser beams if their polarization angles are arranged properly. The laser depolarization by a dynamic plasma density grating may find application in mitigating parametric instabilities in laser-driven inertial confinement fusion.

We propose a 2.1 μm high-energy dissipative soliton resonant (DSR) fiber laser system based on a mode-locked seed laser and dual-stage amplifiers. In the seed laser, the nonlinear amplifying loop mirror technique is employed to realize mode-locking. The utilization of an in-band pump scheme and long gain fiber enables effectively exciting 2.1 μm pulses. A section of ultra-high numerical aperture fiber (UHNAF) with normal dispersion and high nonlinearity and an output coupler with a large coupling ratio are used to achieve a high-energy DSR system. By optimizing the UHNAF length to 55 m, a 2103.7 nm, 88.1 nJ DSR laser with a 3-dB spectral bandwidth of 0.48 nm and a pulse width of 17.1 ns is obtained under a proper intracavity polarization state and pump power. The output power and conversion efficiency are 0.233 W and 4.57%, respectively, both an order of magnitude higher than those of previously reported holmium-doped DSR seed lasers. Thanks to the high output power and nanosecond pulse width of the seed laser, the average power of the DSR laser is linearly scaled up to 50.4 W via a dual-stage master oscillator power amplifier system. The 3-dB spectral bandwidth broadens slightly to 0.52 nm, and no distortion occurs in the amplified pulse waveform. The corresponding pulse energy reaches 19.1 μJ, which is the highest pulse energy in a holmium-doped mode-locked fiber laser system to the best of our knowledge. Such a 2.1 μm, high-energy DSR laser with relatively wide pulse width has prospective applications in mid-infrared nonlinear frequency conversion.

In the present study, we investigated the influence of different mid-stage N compensation timings on agronomic and physiological traits associated with grain yield and quality in field experiments. Two japonica rice cultivars with a good tasting quality (Nangeng 9108 and Nangeng 5055) were examined under eight N compensation timings (N1–N6: one-time N compensation at 7-2 weeks before heading; N7: split N compensation at 5 and 3 weeks before heading; N8: split N compensation at 4 and 2 weeks before heading) and a control with no N compensation. The highest yield was obtained with N7, followed by N3. The yield advantage is mainly attributable to the improved population structure (higher productive tiller rate with a stable number of effective panicles), higher total number of spikelets per unit area (large panicles with more grains per panicle), larger leaf area index in the late period and higher photosynthetic production capacity (more dry matter accumulation and transportation in the middle and late periods). Delaying N compensation timing improved the processing and nutritional quality of rice, but decreased the quality of appearance and cooking/eating traits. Our results suggest that, from the perspective of achieving relative coordination between high yield and high quality of japonica rice, the optimal N compensation should be divided equally at 5 and 3 weeks before heading. However, if simplifying the number of operations and the pursuit of eating quality were considered, one-time N compensation should be conducted at 5 weeks before heading.

People tend to prefer smaller and sooner (SS) rewards over larger and later (LL) ones even when the latter are much larger. Previous research have identified several ways to enhance people’s patience. Adding to this literature, the current paper demonstrates that introduction of upfront losses as well as gains to both SS and LL rewards can decrease people’s impatience. This effect is incompatible with both the normative exponential and descriptive hyperbolic discounting models, which agree on the additive assumption and the independence assumption. We also exculde the integration explanation which assumes subjects integrate upfront money with final rewards and make a decision with bottom line at the end. We consider several possible explanations, including the salience hypothesis, which states that introducing upfront money makes the money dimension more salient than not and thus increases the attractiveness of LL options.

Recently, Scholten and Read (2014) found new violations of dominance in intertemporal choice. Although adding a small receipt before a delayed payment or adding a small delayed receipt after an immediate receipt makes the prospect objectively better, it decreases the preference for that prospect (better is worse). Conversely, although adding a small payment before a delayed receipt or adding a small delayed payment after an immediate payment makes the prospect objectively worse, it increases the preference for that prospect (worse is better). Scholten and Read explained these violations in terms of a preference for improvement. However, to produce violations such as these, we find that the temporal sequences need not be constructed as Scholten and Read suggested. In this study, adding a small receipt before a dated receipt (thus constructed as improving) or adding a receipt after a dated payment (thus constructed as improving) decreases preferences for those prospects. Conversely, adding a small payment after a dated receipt (thus constructed as deteriorating) or adding a small payment before a delayed payment (thus constructed as deteriorating) increases preferences for those prospects.

The meta-surface is introduced into the design of band-notched monopole antennas with single/dual/triple notched bands around 3.6/5.5/7.2 GHz for ultra-wideband (UWB) communication. We show that strong coupling effects between the meta-surface and the antenna would be created through tuning the orientations of the meta-cells according to the field distributions on the antenna surface, and eventually, filter the unwanted radiations of the antenna. Especially, by simply attaching different meta-surfaces on the back of the antenna, the band-notched properties are shown to be changeable without hurting the original structure of the antenna. Both simulation and measurement results demonstrate the monopole with replaceable meta-surfaces has achieved an UWB operating band ranging from 3 to 9 GHz for voltage standing wave ratio (VSWR) ≤ 2 with single/dual/triple notched bands covering frequencies around 3.6/5.5/7.2 GHz. Such a design would obtain significant notched performances for the desired bands and maintain the good radiations in the operating frequency, which make it a suitable candidate for UWB applications.

We report on a three-dimensional direct numerical simulation study of flow structure and heat transport in the annular centrifugal Rayleigh–Bénard convection (ACRBC) system, with cold inner and hot outer cylinders corotating axially, for the Rayleigh number range $Ra \in [{10^6},{10^8}]$ and radius ratio range $\eta = {R_i}/{R_o} \in [0.3,0.9]$ ($R_i$ and $R_o$ are the radius of the inner and outer cylinders, respectively). This study focuses on the dependence of flow dynamics, heat transport and asymmetric mean temperature fields on the radius ratio $\eta$. For the inverse Rossby number $Ro^{-1} = 1$, as the Coriolis force balances inertial force, the flow is in the inertial regime. The mechanisms of zonal flow revolving in the prograde direction in this regime are attributed to the asymmetric movements of plumes and the different curvatures of the cylinders. The number of roll pairs is smaller than the circular roll hypothesis as the convection rolls are probably elongated by zonal flow. The physical mechanism of zonal flow is verified by the dependence of the drift frequency of the large-scale circulation (LSC) rolls and the space- and time-averaged azimuthal velocity on $\eta$. The larger $\eta$ is, the weaker the zonal flow becomes. We show that the heat transport efficiency increases with $\eta$. It is also found that the bulk temperature deviates from the arithmetic mean temperature and the deviation increases as $\eta$ decreases. This effect can be explained by a simple model that accounts for the curvature effects and the radially dependent centrifugal force in ACRBC.