Angular distributions of currents and velocities (energies) of ions produced at various target irradiation angles and laser intensities ranged from 1010 W/cm2 to 1017 W/cm2 were analyzed. It was confirmed that for low laser intensities the ion current distributions are always peaked along the target normal. However, at laser intensities comparable to or higher than 1014 W/cm2, the preferred direction of ion emission strongly depends on the irradiation geometry (laser focus setting, the irradiation angle), and can be off the target normal. This is very likely caused by the non-linear interaction of the laser beam with produced plasma, in particular, by the action of ponderomotive forces and the laser beam self-focusing.

Intense laser-beam interactions with preformed plasma, preceding the laser-target interactions, significantly influence both the ion and X-ray generation. It is due to the laser pulse (its total length, the shape of the front edge, its background, the contrast, the radial homogeneity) as well as plasma (density, temperature) properties. Generation of the super fast (FF) ion groups is connected with a presence of non-linear processes. Saturated maximum of the charge states (independently on the laser intensity) is ascribed to the constant limit radius of the self-focused laser beam. Its longitudinal structure is considered as a possible explanation for the course of some experimental dependencies obtained.

Various applications demand various kinds of ions. Charge state, energy and the amount of laser produced ions depend, primary, on the wavelength, the energy, the pulse duration, and the focusing ability of the laser used. Angle of the target irradiation, angle of the ion extraction (recording), and mainly the focus setting may significantly influence especially the portion of ions with the highest charge states. The participation of non-linear processes on the generation of ions with extremely high parameters is demonstrated. The observed effects support the idea of a longitudinal structure of the self-focused laser beam with a space period of ∼200 µm.

This work describes the application of laser ion source (LIS) for fabrication of semiconductor nanostructures, as well as relevant equipment completed and tested in the IPPLM for the EU STREP “SEMINANO” project and the obtained experimental results. A repetitive pulse laser system of parameters: energy of ∼0.8 J in a 3.5 ns-pulse, wavelength of 1.06 μm, repetition rate of up to 10 Hz and intensity on the target of up to 1011 W/cm2, has been employed to produce Ge ions intended for ion implantation into SiO2 substrate. Simultaneously, laser-ablated material (atoms clusters debris) was deposited on the substrate surface. The parameters of the Ge ion streams (energy and angular distributions, charge states, and ion current densities) were measured with the use of several ion collectors and an electrostatic ion energy analyzer. The SiO2 films of thickness from 20–400 nm prepared on substrates of a single Si crystal were deposited and implanted with the use of laser-produced germanium of different properties. The modified SiO2 layers and sample surface properties were characterized with the use of different methods: X-ray photoelectron and Auger electron spectroscopy (XPS+AES), Raman scattering spectroscopy (RSS) and scanning electron microscopy (SEM). The production of the Ge nano-crystallites has been demonstrated for annealed samples prepared in different experimental conditions.

The properties of plasma (proton) block driven by the laser-induced skin-layer ponderomotive acceleration (S-LPA) mechanism are discussed. It is shown that the proton density of the plasma block is about a thousand times higher than that of the proton beam produced by the target normal sheath acceleration (TNSA) mechanism. Such a high-density plasma (proton) block can be considered as a fast ignitor of fusion targets. The estimates show that using the S-LPA driven plasma block, the ignition threshold for precompressed DT fuel can be reached at the ps laser energy ≤ 100 kJ.

Laser-beam interaction with expanding plasma was investigated using the PALS high-power iodine-laser system. The interaction conditions are significantly changing with the laser focus spot position. The decisive role of the laser-beam self-focusing, participating in the production of ions with the highest charge states, was proved.

Basic properties of generation of high-current ion beams using the skin-layer ponderomotive acceleration (S-LPA) mechanism, induced by a short laser pulse interacting with a solid target are studied. Simplified scaling laws for the ion energies, the ion current densities, the ion beam intensities, and the efficiency of ions' production are derived for the cases of subrelativistic and relativistic laser-plasma interactions. The results of the time-of-flight measurements performed for both backward-accelerated ion beams from a massive target and forward-accelerated beams from a thin foil target irradiated by 1-ps laser pulse of intensity up to ∼ 1017 W/cm2 are presented. The ion current densities and the ion beam intensities at the source obtained from these measurements are compared to the ones achieved in recent short-pulse experiments using the target normal sheath acceleration (TNSA) mechanism at relativistic (>1019 W/cm2) laser intensities. The possibility of application of high-current ion beams produced by S-LPA at relativistic intensities for fast ignition of fusion target is considered. Using the derived scaling laws for the ion beam parameters, the achievement conditions for ignition of compressed DT fuel with ion beams driven by ps laser pulses of total energy ≤ 100 kJ is shown.

The possibilities of producing ultrahigh-current-density ps ion fluxes by the skin-layer interaction of a short (≤ 1ps) laser pulse with plasma were studied using two-fluid hydrodynamic simulations, and the time-of-flight measurements. Backward-emitted ion fluxes from a massive (Au) target as well as forward-emitted fluxes from various thin foil targets irradiated by a 1-ps laser pulse of intensity up to 2 × 1017 W/cm2 were recorded. Both the simulations and the measurements confirmed that using the short-pulse skin-layer interaction of a laser pulse with a thin pre-plasma layer in front of a solid target, a high-density collimated ion flux of extremely high ion current density (∼ 1010 A/cm2 close to the target), can be generated at laser intensity only ∼ 1017 W/cm2. The ion current densities produced by this way were found to be comparable to (or even higher than) those estimated from recent short-pulse experiments using a target normal sheath acceleration mechanism at relativistic laser intensities. The effect of the target structure on the current densities and energies of forward-emitted ions is demonstrated.

The concept of the fast ignitor for laser fusion has led to some modifications in applying petawatt-picosecond (PW-ps) laser-produced high intensity particle beams to ignite deuterium-tritium (DT) fuel. Some very anomalous measurements of ion emission from targets irradiated by picosecond laser pulses led to the development of a skin depth interaction scheme where a defined control of prepulses is necessary. Based on these experimental facts, we have applied a one-dimensional two-fluid hydrodynamic code to understand how the nonlinear ponderomotive force generates two plasma blocks, one moving against the laser light (ablation) and the other moving into the target. This compressed block produces an ion current density of above 10$^{11}$ A cm$^{-2}$ and an ion energy of about 100 keV. This may be a rather promising option to use PW-ps laser pulses for igniting fusion in solid density DT fuel, realizing very high gain controlled fusion reactions.

Measurements of the ion emission from targets irradiated with neodymium glass and iodine lasers were analyzed and a very significant anomaly observed. The fastest ions with high charge number Z, which usually are of megaelectron volt energy following the relativistic self-focusing and nonlinear-force acceleration theory, were reduced to less than 50 times lower energies when 1.2 ps laser pulses of about 1 J were incident. We clarify this discrepancy by the model of skin depth plasma front interaction in contrast to the relativistic self-focusing with filament generation. This was indicated also from the unique fact that the ion number was independent of the laser intensity. The skin layer theory prescribes prepulse control and lower (near relativistic threshold) laser intensities for nonlinear-force-driven plasma blocks for high-gain ignition similar to light ion beam fusion.

The experimental results of the investigations on the influence of external magnetic and electric fields on the characteristics of a tungsten ion stream emitted from a plasma produced by the Nd:glass laser (1 J, 1 ns) performed at IPPLM, Warsaw are presented. A negatively biased target up to −15 kV and a magnetic field up to 0.45 T were used in the experiment. A set of ion collectors and an electrostatic cylindrical ion energy analyzer located at small angles with respect to the laser beam axis and at large distances from the target were applied for ion measurements. The effect of an external magnetic field is essential to plasma expansion, but the effect of the retarding potential of the target is very weak in our experimental conditions. The aim of the studies was to prove the possibility of the optimization of ion beam parameters from laser-produced plasma for the particular application as a laser ion source coupled with the electron cyclotron resonance ion source for particle accelerators.

This work reports on investigations of parameters of ion streams emitted from a plasma produced with a picosecond laser at the power densities ≥1016 W/cm2. Not many papers dealing with such investigations have been published up to now, in spite of the fact that the application of precise corpuscular diagnostics enables better learning of the physical properties of such a plasma. As a result of the investigations carried out, the average and maximum energies of Cu ions were 30 keV and 150 keV, respectively. The maximum charge of Cu ions was 13+. The dependencies of parameters of ions emitted from the plasma on the laser-pulse energy as well as on the location of the focus of the laser beam with respect to the target's surface were also found out. The results obtained from the ion measurements in relation to the results of measurements of X ray are discussed.

This paper presents comprehensive experimental results of angular distributions of ions emitted from laser-produced plasmas. Performing a series of laser shots onto planar Sn, Au, and Pb targets, both the focusing conditions as well as the tilt angle of the target were changed to study the effect on the plasma expansion. In the experiments, the iodine laser system PERUN (laser energy of 30 J in 350 ps of duration) with laser power density of 5 × 1014 W/cm2 was used. For plasma diagnostics four ion collectors and an ion-energy analyzer were applied. Comparison of angular distribution of the fast ion group (velocity within the range of 1–3.4 × 108 cm/s) and of the slow ion group (velocity within the range of 0.14–1 × 108 cm/s) shows distinct differences. The preferred direction of ion emission of these groups depends seriously on focusing conditions. When setting the focus on the in-focus position both groups of ions are peaked in the direction close to the target normal. The maximum charge of ions registered by the ion-energy analyzer were 36+, 51+, and 49+ for Sn, Au, and Pb, respectively.

Maximum charge states of ions registered in the far expansion zone from laser-produced plasma of Al, Co, Ni, Cu, Ta, W, Pt, Au, Pb, and Bi are presented. The Thomson parabola spectrometer was used to display a general view of the ion species of an expanding plasma while detailed ion charge-energy spectra were determined by the cylindrical electrostatic ion energy analyzer. The current densities of highly charged ion groups above 20 mA/cm2 were measured by use of an ion collector at a distance of ∼1 m from the target. The photodissociation iodine laser system PERUN (λ = 1.315 μm, power density up to ∼1015 W cm−2) was employed as a driver.

This paper presents a set of complementary corpuscular diagnostics applied in experiments for investigation of laser-produced plasma as a source of ions. The measuring possibilities and methods for processing experimental data of a cylindrical electrostatic ion energy analyzer, a Thomson parabola ion analyzer, various types of electrostatic probes, a detector of neutral atom fluxes, as well as methods for visualization of ion emission areas are discussed. Special attention was focused on the ion-induced secondary electron emission problem and its influence on the accuracy of the measurements.

Results are presented of experiments on ion production from Ta targets using a short pulse (350–600 ps in focus) illumination with focal power densities exceeding 1014 Wcm-2 at the wavelength of an iodine photodissociation laser (1.315 μm) and its harmonics. Strong evidence of the existence of tantalum ions with the charge state +45 near the target surface was obtained by X-ray spectroscopy methods. The particle diagnostics point to the existence of frozen high charge states (<53+) of Ta ions in the far expansion zone at about 2 m from the target. The measured charge state-ion energy distribution indicates the highest energy (>4 MeV) for the highest observed charge states. A tentative theoretical explanation of the observed anomalous charge state freezing phenomenon in the expanding plasma produced by a subnanosecond laser pulse is given.

The results of an experimental investigation of iodine laser interaction with Al targets obtained on the laser system PERUN (λ = 1.315 μm, E < 50 J, τ ∼ 350 ps) by means of corpuscular diagnostics, are presented. Ion velocity distributions, angular distributions, and electron temperature were determined. The plasma electron temperature Te ∼ 550 ± 100 eV was weakly dependent on laser intensity in the range Iλ2 ∼ 1014-1015 Wcm-2 μm2. Maximal velocity (energy) for the Al ions was estimated as V ∼ 9 × 107 cm/s (∼ 110 keV) and the maximal measured charge state was z = 13. It was shown that the diameter of the area emitting high energy ions is a few times larger than the focus diameter (80 μm), which indicates a strong influence of lateral heat transport on plasma parameters. The hot electron temperature Te.h was estimated to be in the range 6–10 keV. On the basis of Langmuir probe measurements, the electron temperature of expanded Al plasma at a distance of about 100 cm was estimated to be Te ∼ 3 eV

This article presents the tendency of the changes of Nd-laser plasma parameters in dependence upon increasing target atomic numbers. In the experiment, the following targets — (C8H8)n, SiO2, Al, Cu, Ta, and Au — were investigated. For targets with Z higher than 13, the two-temperature plasma is observed with temperatures Te =500–600 eV and Te≅ 100 eV. Energy carried by ions from the low-temperature plasma can be higher than half the total energy carried by ions. The number of ions from low-temperature, X-ray-heated plasma can be by an order of magnitude higher than the number of ions from thermal plasma (Te = 500–600 eV).

The paper presents results of an investigation of energy transport in 6-μm aluminum foils covered with a silver or gold layer irradiated with 1·06-μm, 1-ns laser-pulse at intensities 1013to 1014 W/cm2. The increase in mass ablation rate and volume heating of accelerated fragment of the foil as well as the increased range of lateral energy transport were registered. The measured plasma parameters from aluminum foils were used for testing the one-dimesional numerical code.

The mass ablation rate and ablation pressure on laser-irradiated spherical microshells were measured using the space-resolved X-ray spectroscopy. A new method for the study of the ablation by means of the Doppler shifted X-ray images is proposed. The time-resolved measurements of X-ray emission from layered microtargets allow us to determine the heat front penetration through the microshell wall.