In this paper, a single-layer band-stop frequency selective surface (FSS) by combination of Mike Kastle unit and square ring unit is proposed to achieve wide angular stable shielding. Owing to the rotational symmetry of the structure, the designed FSS is insensitive to polarization. By the combination design, the wide angular stability can be achieved as the incident angle increases from 0° to 85°, with only a maximum frequency deviation of 0.012 GHz. Meanwhile, the mechanism of the proposed FSS is investigated by the parametric analysis of equivalent circuit model. The prototype was manufactured and measured to verify the design and simulation analysis, and the measurement results were in good agreement with the simulation results.

Hepatitis E virus infection is a major cause of acute hepatitis, typically self-limiting but occasionally leading to liver failure. Understanding disease progression factors could inform prevention strategies. This study aimed to analyse the characteristics of a large cohort of hospitalised hepatitis E patients in Tianjin, China, and explore factors influencing their progression to liver failure. A total of 1279 hospitalised patients with hepatitis E were included in this cross-sectional study in Tianjin, China. Student's t-test and the Mann–Whitney U-test were used for comparisons. Multiple logistic regression analysis was used to explore the association. Among these 1279 patients, 107 (8.4%) developed liver failure. Patients with diabetes mellitus (DM) (95% confidence interval [CI] 1.150–2.887, p = 0.011), liver cirrhosis (95% [CI] 2.229–7.224, p < 0.001), and hepatitis B (95% [CI] 1.159–4.512, p = 0.017) were more likely to progress to liver failure. Hepatitis E patients with comorbid DM, liver cirrhosis, or hepatitis B virus co-infection have higher risks of developing liver failure. Hepatitis E vaccination may be recommended for these vulnerable patients to curb disease severity.

We investigated the connectivity of high-energy random grain boundaries through fractal analyses of specimens with different grain boundary (GB) microstructures in BFe10-1-1 copper–nickel alloy. It was found that the profile of maximum random boundary network possesses a fractal nature and more than one fractal dimension can exist. The fraction of special boundaries and grain size homogeneity can play an important role on GB character distribution. Here, GB microstructures are combined with quantitative materials structure–property relationship models to predict intergranular corrosion properties. The experimental results are accurately consistent with the theoretical predictions.

To investigate the prevalence of canine and feline hookworms in South China, and to assess the risk of zoonotic hookworms to humans, one pair of primers (HRM-F/HRM-R) was designed to establish a high-resolution melting (HRM) method based on internal transcribed spacer 1 (ITS-1) rDNA for the detection of Ancylostoma ceylanicum, A. caninum and A. tubaeforme infection. The results showed that the HRM for the three hookworms produced different melting-curve profiles, where melting temperature (Tm) values were 84.50°C for A. ceylanicum, 82.25°C for A. caninum and 81.73°C for A. tubaeforme, respectively. The reproducibility of intra- and inter-assay melting curves was almost perfect. The lowest concentration detected was about 5.69 ×10−4 g/μl. The HRM detection results from 18 canine and feline hookworm samples were in complete accordance with their sequencing results. The HRM method was more sensitive than the polymerase chain reaction–restriction fragment length polymorphism (PCR-RFLP) technique in the detection of 98 clinical samples. It is concluded that the HRM method can differentiate between A. ceylanicum, A. caninum, A. tubaeforme and their mixed infections, which may provide important technical support for the zoonotic risk assessment and molecular epidemiological survey of canine and feline hookworms.

In this paper, drop impact onto a sphere is numerically investigated at moderate Reynolds and Weber numbers. It is naturally expected that the aspect ratio of the sphere to the drop, $\unicode[STIX]{x1D706}_{r}$, would make a big difference to drop spreading and retraction on the sphere, compared with drop impact onto a flat substrate. To quantitatively assess the effect of $\unicode[STIX]{x1D706}_{r}$, a diffuse-interface immersed-boundary method is adopted after being validated against experiments. With the help of numerical simulations, we identify the key regimes in the spreading and retraction, analyse the results by scaling laws, and quantitatively evaluate the effect of $\unicode[STIX]{x1D706}_{r}$ on the impact dynamics. We find that the thickness of the liquid film spreading on the sphere can be well approximated by $h_{L,\infty }(1+3/4\unicode[STIX]{x1D706}_{r}^{-3/2})$, where $h_{L,\infty }$ represents the film thickness of drop impact on a flat substrate. At the early stage of spreading, the temporal variation of the wetted area is independent of $\unicode[STIX]{x1D706}_{r}$ when the time is rescaled by the thickness of the liquid film. Drops are observed to retract on the sphere at a roughly constant speed, and the predictions of theoretical analysis are in good agreement with numerical results.

Ancylostoma tubaeforme may infect canids, felids and humans, and pose a potential risk to public health. Polymerase chain reaction (PCR) techniques were used to amplify the complete mitochondrial (mt) genome sequence of A. tubaeforme from cats and to analyse its sequence characteristics after molecular identification based on the internal transcribed spacer ITS1+ sequence. The results show that the complete mt genome sequence (GenBank accession number KY070315) of A. tubaeforme from cats was 13,730 bp in length, including 12 protein-coding genes, 22 transfer RNA (tRNA) genes, two ribosomal RNA (rRNA) genes, two non-coding regions and an AT-rich region. The nucleotide content of A and T was 77.93%, biased toward A and T. Twelve protein-coding genes used ATT, TTG and GTG as initiation codons, and TAA, TAG, TA and T as termination codons. The length of the 22 tRNA genes ranged from 52 to 62 bp, their predicted secondary structures were D loops and V loops. The lengths of the two rRNAs were 958 and 697 bp. Phylogenetic analyses showed that A. tubaeforme from cats was in the lineage of Ancylostoma, having a close phylogenetic relationship with A. caninum. This study reports for the first time the mt genome of A. tubaeforme from cats in China, which could enhance the mt genome database of Ancylostomatidae nematodes, and it offers the scientific basis for further studies in the genetic diversity of hookworms among different hosts.

Graphene nanoribbons as a quasi-one-dimensional form of graphene has attracted intensive attention in energy related devices. Upon oxidation and cutting of multiwall carbon nanotubes (MWCNTs), highly dispersive graphene oxide nanoribbons (GONRs) were obtained, on which Zn2+ and Sn4+ can be homogenously deposited. The reduced graphene oxide nanoribbons (rGONRs)/Zn2SnO4 composite with a homogeneous distribution of nanoparticles on the nanoribbons have been prepared through facile in situ chemical co-reduction process. It is worth noting that the size of Zn2SnO4 particles tightly dispersed on rGONRs is about 15 nm. Benefit from the introduction of rGONRs, the specific surface area and electrode conductivity of rGONRs/Zn2SnO4 can both be effectively enhanced. The as-prepared rGONRs/Zn2SnO4 as anode material for lithium-ion batteries displays desirable electrochemical performance (727.2 mA h/g after 50 cycles at the current density of 100 mA/g), which is mainly attributed to the uniformly distributed Zn2SnO4 nanoparticles and the immobilizing and conducting effects of rGONRs.

Stone coal is an important vanadium-bearing resource in China. Most vanadium exists in stone coal as V(III), which is stable and not easily to be extracted. The V(III) should be oxidized to V(IV) and/or V(V) by roasting with additives at high temperature and then extracted by acid leaching and/or water leaching. Hence, the vanadium valency in roasted stone coal can reflect the roasting efficiency and leaching rate. In traditional digestion process, the V(V) can oxidize V(III) in solution and this causes great error to the determination of vanadium valency. In this study, the V(IV) and V(V) in roasted stone coal is dissolved firstly in 5% of hydrochloric acid at room temperature for 1h because the V(III) embedded in crystal lattice can not dissolve in dilute acid. The acid solution containing V(IV) and V(V) is titrated by 0.02 M ammonium ferrous sulfate (AFS), and the jump in titration curve indicates the reducing of V(V) to V(IV) by ferrous ion. The volume of V(V) can be calculated according to the consumption of AFS. The total volume of vanadium can be determined by potassium permanganate oxidation-ammonium ferrous sulfate titrimetric method. Hence, the volume of V(IV) can be obtained by deducting the quantity of V(V) from the total vanadium. Secondly, the undissolved residue is digested in Teflon vessel by phosphoric acid and hydrofluoric acid at 90 °C for 2h. The digestion solution is also titrated by AFS under nitrogen atmosphere, and the jump in titration curve denotes the reducing of V(IV) to V(III) by ferrous ion in phosphoric acid medium. So, the volume of V(III) and V(IV) can be obtained in the same way. This method is characterized by high measuring accuracy and excellent reproducibility.

The temperature dependence of the various electric relaxation times in the perovskite oxide CaCu3Ti4O12 (CCTO) is determined (i) by trap state spectroscopy and (ii) by the dielectric loss function. A similarity in both number and properties of the (i) and (ii) relaxation times was found, suggesting that the dielectric response is strongly correlated with the trap state relaxation, although some differences remain. One or more dipoles developing charged trap states are considered responsible, and the experimental dielectric response of CCTO and Mn substituted CCTO are explored.

For a set function G on an atomless finite measure space (X, , m), we define the subgradient, conjugate set of and conjugate functional of G. It is proved that a minimization problem of set function G has an optimal solution if and only if the Lagrangian on × L1(X, , m)has a saddle point (Ω0, f0) such that

where f0 is an element of the conjugate set (for the definition, see the later context).

The present study was designed to study the mechanisms by which dietary conjugated linoleic acids (CLA) decrease serum cholesterol. Hamsters were fed a semi-synthetic diet containing 1 g cholesterol/kg diet with or without supplementation with 20 g linoleic acid (LA) and 20 g CLA/kg diet. After 8 weeks, serum fasting total cholesterol (TC) and triacylglycerol (TG) were significantly lower in the LA-supplemented and CLA-supplemented groups compared with those of the control (CTL) hamsters. In contrast to LA, CLA significantly lowered hepatic cholesterol but it increased the level of adipose tissue cholesterol, suggesting that the hypocholesterolaemic mechanism of CLA is different from that of LA. CLA decreased the activity of intestinal acyl CoA:cholesterol acyltransferase (ACAT) whereas LA had no effect on this enzyme. Consequently, CLA supplementation increased the faecal excretion of total neutral sterols, but it had no or little effect on the faecal acidic sterols. If the ACAT is associated with cholesterol absorption, the part of mechanisms by which CLA decreases serum cholesterol may involve down-regulation of intestinal ACAT activity.

Poly Si1−xGex films have been suggested as a promising alternative to the currently employed poly-Si gate electrode for CMOS technology due to lower resistivity, less boron penetration, and less gate depletion effect than those of poly Si gates. We investigated the formation of poly Si1−xGex films grown by UHV CVD using Si2H6 and GeH4 gases, and studied their microstructures as well as their electrical characteristics. The Ge content of the Si1−xGex films increased linearly with the flux of the GeH4 gas up to x=0.3, and saturated above x=0.45. The deposition rate of the poly Si1−xGex films increased linearly with the flux of the GeH4 gas up to x=0.1, above which it is slightly changed. The resistivity of the Si1−xGex films decreased as the Ge content increased, and was about one half of that of poly-Si films at the Ge content of 45%. The C-V measurements of the MOSCAP structures with poly Si1−xGex gates demonstrated that the flat band voltage of the poly Si1−xGex films was lower than that of poly-Si films by 0.2V.