After achieving significant research results on laser-driven boron fusion, the essential facts are presented how the classical very low-energy gains of the initially known thermal ignition conditions for fusion of hydrogen (H) with the boron isotope 11 (HB11 fusion) were bridged by nine orders of magnitudes in agreement with experiments. This is possible under extreme non-thermal equilibrium conditions for ignition by >10 PW-ps laser pulses of extreme power and nonlinear conditions. This low-temperature clean and low-cost fusion energy generation is in crucial contrast to local thermal equilibrium conditions with the advantage to avoid the difficulties of the usual problems with extremely high temperatures.

With the aim to overcome the problems of climatic changes and rising ocean levels, one option is to produce large-scale sustainable energy by nuclear fusion of hydrogen and other very light nuclei similar to the energy source of the sun. Sixty years of worldwide research for the ignition of the heavy hydrogen isotopes deuterium (D) and tritium (T) have come close to a breakthrough for ignition. The problem with the DT fusion is that generated neutrons are producing radioactive waste. One exception as the ideal clean fusion process – without neutron production – is the fusion of hydrogen (H) with the boron isotope 11B11 (B11). In this paper, we have mapped out our research based on recent experiments and simulations for a new energy source. We suggest how HB11 fusion for a reactor can be used instead of the DT option. We have mapped out our HB11 fusion in the following way: (i) The acceleration of a plasma block with a laser beam with the power and time duration of the order of 10 petawatts and one picosecond accordingly. (ii) A plasma confinement by a magnetic field of the order of a few kiloteslas created by a second laser beam with a pulse duration of a few nanoseconds (ns). (iii) The highly increased fusion of HB11 relative to present DT fusion is possible due to the alphas avalanche created in this process. (iv) The conversion of the output charged alpha particles directly to electricity. (v) To prove the above ideas, our simulations show for example that 14 milligram HB11 can produce 300 kWh energy if all achieved results are combined for the design of an absolutely clean power reactor producing low-cost energy.

The application of laser pulses with psec or shorter duration enables nonthermal efficient ultrahigh acceleration of plasma blocks with homogeneous high ion energies exceeding ion current densities of $10^{12}~\text{A}~\text{cm}^{-2}$. The effects of ultrahigh acceleration of plasma blocks with high energy proton beams are proposed for muon production in a compact magnetic fusion device. The proposed new scheme consists of an ignition fusion spark by muon catalyzed fusion ($\unicode[STIX]{x03BC}$CF) in a small mirror-like configuration where low temperature D–T plasma is trapped for a duration of $1~\unicode[STIX]{x03BC}\text{s}$. This initial fusion spark produces sufficient alpha heating in order to initiate the fusion process in the main device. The use of a multi-fluid global particle and energy balance code allows us to follow the temporal evolution of the reaction rate of the fusion process in the device. Recent progress on the ICAN and IZEST projects for high efficient high power and high repetition rate laser systems allows development of the proposed device for clean energy production. With the proposed approaches, experiments on fusion nuclear reactions and $\unicode[STIX]{x03BC}$CF process can be performed in magnetized plasmas in existing kJ$/$PW laser facilities as the GEKKO-LFEX, the PETAL and the ORION or in the near future laser facilities as the ELI-NP Romanian pillar.

Measured highly elevated gains of proton–boron (HB11) fusion (Picciotto et al., Phys. Rev. X 4, 031030 (2014)) confirmed the exceptional avalanche reaction process (Lalousis et al., Laser Part. Beams 32, 409 (2014); Hora et al., Laser Part. Beams 33, 607 (2015)) for the combination of the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above $10^{20}~\text{cm}~\text{s}^{-2}$ for plasma blocks was theoretically and numerically predicted since 1978 (Hora, Physics of Laser Driven Plasmas (Wiley, 1981), pp. 178 and 179) and measured (Sauerbrey, Phys. Plasmas 3, 4712 (1996)) in exact agreement (Hora et al., Phys. Plasmas 14, 072701 (2007)) when the dominating force was overcoming thermal processes. This is based on Maxwell’s stress tensor by the dielectric properties of plasma leading to the nonlinear (ponderomotive) force $f_{\text{NL}}$ resulting in ultra-fast expanding plasma blocks by a dielectric explosion. Combining this with measured ultrahigh magnetic fields and the avalanche process opens an option for an environmentally absolute clean and economic boron fusion power reactor. This is supported also by other experiments with very high HB11 reactions under different conditions (Labaune et al., Nature Commun. 4, 2506 (2013)).

Exceptionally high reaction gains of hydrogen protons measured with the boron isotope 11 are compared with other fusion reactions. This is leading to the conclusion that secondary avalanche reactions are happening and confirming the results of high-gain, neutron-free, clean, safe, low-cost, and long-term available energy. The essential basis is the unusual non-thermal block-ignition scheme with picosecond laser pulses of extremely high powers above the petawatt range.

Interaction of a linearly polarized Gaussian laser pulse (at relativistic intensity of 2.0 × 1020 Wcm−2) with a multi-layer foam (as a near critical density target) attached to a solid layer is investigated by using two-dimensional particle-in-cell simulation. It is found that electrons with longitudinal momentum exceeding the free electrons limit of meca02/2 so-called super-hot electrons can be produced when the direct laser acceleration regime is fulfilled and benefited from self-focusing inside of the subcritical plasma. These electrons penetrate easily through the target and can enhance greatly the sheath field at the rear, resulting in a significant increase in the maximum energy of protons in target normal sheath acceleration regime. The results indicate that the maximum proton energy is enhanced by 2.7 times via using an assembled target arrangement compared to a bare solid target. Furthermore, by demonstration of this assembly, the maximum proton energy is improved beyond the optimum amount achieved by a two-layer target proposed by Sgattoni et al. (2012).

We analyze the trajectory of near-Earth asteroid 2009~BD, which is a candidate target of the NASA Asteroid Redirect Mission. The small size of 2009 BD and its Earth-like orbit pose challenges to understanding the dynamical properties of 2009 BD. In particular, nongravitational perturbations, such as solar radiation pressure and the Yarkovsky effect, are essential to match observational data and provide reliable predictions. By using Spitzer Space Telescope IRAC observations and our model for the thermophysical properties and the nongravitational forces acting on 2009 BD we obtain probabilistic derivations of the physical properties of this object. We find two physically possible solutions. The first solution shows 2009 BD as a 2.9 ± 0.3 m diameter rocky body with an extremely high albedo that is covered with regolith-like material, causing it to exhibit a low thermal inertia. The second solution suggests 2009 BD to be a 4 ± 1 m diameter asteroid with albedo 0.45 ± 0.35 that consists of a collection of individual bare rock slabs. We are unable to rule out either solution based on physical reasoning. 2009 BD is the smallest asteroid for which physical properties have been constrained, providing unique information on the physical properties of objects in the size range smaller than 10 m.

Fusion reactions of solid density boron-11 with protons after initiation of a fusion flame by very powerful picosecond laser pulses were derived for plane geometry. The problem of lateral energy losses with laser beams was solved by using spherical geometry, where however the gains are limited. The other elimination of losses now available by cylinder-axis symmetric 10 kilotesla magnetic fields is possible needing laser powers in the exawatt range. Estimations are presented by varying parameters for reducing the necessary laser pulse powers to lower values by up to a factor 100.

One of the numerous applications of the ICAN laser using the advantage of fiber optics with chirped pulse amplification (CPA), is the scheme of side-on initiation of a nuclear fusion flame in solid density fuel with laser pulses of shorter than picosecond (ps) duration and power in the petawatt (PW) and higher range. The ICAN Fiber optics has special advantages with the potential that >900 PW spherical laser pulses may ignite the proton reaction with 11B (HB11) without the problem of dangerous radioactive radiation. Though secondary reactions can be estimated very roughly, the feasibility of a power station with the necessary energy gains can be concluded.

In this research, we presented the application of picosecond terawatt laser pulses for ultrahigh acceleration of plasma blocks for fast ignition of fusion. Ultrahigh acceleration of plasma blocks after irradiation of picosecond laser pulses of around terawatt power in the range of 1020 cm/s2 was discovered by Sauerbrey (1996) as measured by Doppler effect where the laser intensity was up to about 1018 W/cm2. This is several orders of magnitude higher than acceleration by irradiation based on thermal interaction of lasers has produced. This ultrahigh acceleration resulted from hydrodynamic computations at plane target interaction in 1978 at comparable conditions where the interaction was dominated by the nonlinear (generalized ponderomotive) forces where the laser energy was instantly converted into plasma motion in contrast to slow and delayed thermal collision processes. After clarifying this basic result, the application of the plasma blocks for side-on ignition of solid density or modestly compressed fusion fuel following the theory of Chu (1971) is updated in view of later discovered plasma properties and the ignition of deuterium tritium and of proton-11B appeared possible for a dozen of PW-PS laser pulses if an extremely high contrast ratio avoided relativistic self-focusing. A re-evaluation of more recent experiment confirms the acceleration by the nonlinear force, and the generation of the fusion flame with properties of Rankine-Hugoniot shocks is reported.

The new possibility of side-on laser ignition of p-11B with negligible radioactivity encouraged to study the fusion of solid state p-7Li fuel that again turns out to be only about 10 times more difficult than the side-on ignition of solid deuterium-tritium using petawatt-picosecond laser pulses at anomalous interaction conditions if very high contrast ratio. Updated cross sections of the nuclear reaction are included.

A fundamental different mechanism dominates laser interaction with picosecond-terawatt pulses in contrast to the thermal-pressure processes with ns pulses. At ps-interaction, the thermal effects are mostly diminished and the nonlinear (ponderomotive) forces convert laser energy instantly with nearly 100% efficiency into the space charge neutral electron cloud, whose motion is determined by the inertia of the attached ion cloud. These facts were realized only by steps in the past and are expressed by the ultrahigh plasma acceleration, which is more than few thousand times higher than observed by any thermokinetic mechanism. The subsequent application for side-on ignition of uncompressed fusion fuel by the ultrahigh accelerated plasma blocks is studied for the first time by using the genuine two-fluid hydrodynamics. Details of the shock-like flame propagation can be evaluated for the transition to ignition conditions at velocities near 2000 km/s for solid deuterium-tritium.

The hot spot heating process by an assumed deuteron beam is evaluated in order to estimate the contribution of the energy produced by the deuteron beam-target fusion to the heating process. The deuteron beam energy versus the number of deuterons is evaluated through the experimentally achieved proton beam energy distribution using the TRIDENT short pulse laser at the Los Alamos National Laboratory (LANL). The corresponding hot spot heating is then calculated using this assumed deuteron beam spectrum. The resulting first order heating dynamics is employed in the expanded “bonus” energy calculation, and a 12.73% extra energy from deuteron beam-target fusion was found with the assumed deuteron spectrum when ρrb = 4.5 g/cm2 is considered, where ρ is the fuel density, and rb is the ion beam focusing radius on the target. The results provide further insight into the contribution of the extra heat produced by deuteron beam-target fusion to the hot spot ignition process. A further analysis of how a converter foil using ultra-high-density cluster materials can help to achieve the yield requirements for ignition is presented.

In addition to the matured “laser inertial fusion energy” with spherical compression and thermal ignition of deuterium-tritium (DT), a very new alternative for the fast ignition scheme may have now been opened by using side-on block ignition aiming beyond the DT-fusion with igniting the neutron-free reaction of proton-boron-11 (p-11B). Measurements with laser pulses of terawatt power and ps duration led to the discovery of an anomaly of interaction, if the prepulses are cut off by a factor 108 (contrast ratio) to avoid relativistic self focusing in agreement with preceding computations. Applying this to petawatt (PW) pulses for Bobin-Chu conditions of side-on ignition of solid fusion fuel results after several improvements in energy gains of 10,000. This is in contrast to the impossible laser-ignition of p-11B by the usual spherical compression and thermal ignition. The side-on ignition is less than ten times only more difficult than for DT ignition. This is essentially based on the instant and direct conversion the optical laser energy by the nonlinear force into extremely high plasma acceleration. Genuine two-fluid hydrodynamic computations for DT are presented showing details how ps laser pulses generate a fusion flame in solid state density with an increase of the density in the thin flame region. Densities four times higher are produced automatically confirming a Rankine-Hugoniot shock wave process with an increasing thickness of the shock up to the nanosecond range and a shock velocity of 1500 km/s which is characteristic for these reactions.

An anomalously strong increase of nuclear fusion gains for laser driven compression and thermal ignition of hydrogen-boron11 has been discovered from computations by using the latest results of Newins and Swain about details of a resonance maximum of the astrophysical S-function at 148 keV for the reaction cross-sections. Extensive computations based on volume ignition showed some usual improvements of the fusion gains. However, for a very narrow range of parameters, the increase of the gain was found to be higher by more than a factor 6. This is very unusual in all similar computations and is related to retrograde properties which were known for other parameter values. On top it is most important that the anomalous range is in the practically very interesting range for incorporation of laser pulse energies of few megajoules. The gains of up to 20 may be of interest for power generation in future by the high density fusion scheme.

Here we report on the production of highly directed ion blocks by plasma interaction of ultraviolet wavelength light produced from a KrF laser. This may support the requirement to produce a fast ignition deuterium-tritium fusion at densities not much higher than the solid state by a single shot petawatt-picoseconds ultraviolet laser pulse. Using double Rayleigh initial density profiles, we are studying numerically how the nonlinear force necessary to accelerate plasma blocks may reach the highest possible thickness. Propagation of plasma blocks and the volumetric hot electrons can be shown in detail. Results of computations for wavelengths of two lasers are compared, which show that the block current density for a KrF laser is approximately four times bigger than for the Nd-glass lasers. This is in good agreement with the number predicted by theory.

In contrast to the usual laser fusion scheme with spherical irradiation and very high compression and ignition of fuel, the alternative scheme with side-on ignition of uncompressed solid density of fuel (Chu) may lead to a solution by using the now available picosecond laser pulses with higher than petawatt power. A necessary condition is to use clean laser pulses with better than 108 contrast ratio for suppression of relativistic self-focusing. When updating the analysis of Chu for fusion of deuterium-tritium and proton-11B, one problem is that the correct use of the stopping power of the alpha particles had to be solved. Discrepancies are evaluated in view of the stopping power at the low temperature range of the plasmas where the change of the emitted bremsstrahlung is involved.

Energy production by laser driven fusion energy is highly matured by spherical compression and ignition of deuterium-tritium (DT) fuel. An alternative scheme is the fast ignition where petawatt (PW)-picosecond (ps) laser pulses are used. A significant anomaly was measured and theoretically analyzed with very clean PW-ps laser pulses for avoiding relativistic self focusing. This permits a come-back of the side-on ignition scheme of uncompressed solid DT, which is in essential contrast to the spherical compression scheme. The conditions of side-on ignition thresholds needed exorbitantly high energy flux densities E*. These conditions are now in reach by using PW-ps laser pulses to verify side-on ignition for DT. Generalizing this to side-on igniting solid state density proton-Boron-11 (HB11) arrives at the surprising result that this is one order of magnitude more difficult than the DT fusion. This is in contrast to the well known impossibility of igniting HB11 by spherical laser compression and may offer fusion energy production with exclusion of neutron generation and nuclear radiation effects with a minimum of heat pollution in power stations and application for long mission space propulsion.

Clusters of condensed deuterium of densities up to 1029 cm−3 in pores in solid oxide crystals were confirmed from time-of-flight mass spectrometry measurements. Based on these facts, a schematic outline and possible conclusions of expectable generalizations are presented, which may lead to a simplification of laser driven fusion energy including new techniques for preparation of targets for application in experiments of the NIF type, but also for modified fast igniter experiments using proton or electron beams or side-on ignition of low compressed solid fusion fuel.