In this paper, effects of discharge parameters and modulation frequency on the signal of laser-induced fluorescence measurements of ion velocity distribution functions are investigated in the LIF Test Source. A maximum modulation frequency is found for each given set of parameters, beyond which the signal gradually declines. Meanwhile, this maximum modulation frequency occurred consistently at ~1/10 of the theoretical frequency limit and photon counts received by a photomultiplier tube, which indicates that as modulation frequency and the associated per-pulse-excitation-event count decrease, the transition from the macroscopic statistical signal to the microscopic probabilistic signal is a gradual process.

Swelling deformation tests of Kunigel bentonite and its sand mixtures were performed in distilled water and NaCl solution. The salinity of NaCl solution has a significant impact on the swelling properties of bentonite, but not on its surface structure. The surface structure was characterized using the fractal dimension Ds. Based on the fractal dimension, a unique curve of the em–pe relationship (em is the void ratio of montmorillonite and pe is the effective stress) at full saturation was introduced to express the swelling deformation of bentonite–sand mixtures. In mixtures with a large bentonite content, the swelling deformation always followed the em–pe relationship. In mixtures with a small bentonite content, when the effective stress reached a threshold, the void ratio of montmorillonite em deviated from the unique em–pe curve due to the appearance of a sand skeleton. The threshold of vertical pressure for mixtures in different solutions and the maximum swelling strains were estimated using the em–pe relationship. The good agreement between estimates and experimental data suggest that the em–pe relationship might be an alternative method for predicting the swelling deformation of bentonite–sand mixtures in salt solution.

Underground Nuclear Astrophysics in China (JUNA) will take the advantage of the ultra-low background in Jinping underground lab. High current accelerator with an ECR source and detectors were commissioned. JUNA plans to study directly a number of nuclear reactions important to hydrostatic stellar evolution at their relevant stellar energies. At the first period, JUNA aims at the direct measurements of 25Mg(p,γ)26 Al, 19F(p,α) 16 O, 13C(α, n) 16O and 12C(α,γ) 16O near the Gamow window. The current progress of JUNA will be given.

For the first time, an experiment has been conducted to investigate synthetic jet laminar vortex rings impinging onto porous walls with different geometries by time-resolved particle image velocimetry. The geometry of the porous wall is changed by varying the hole diameter on the wall (from 1.0 mm to 3.0 mm) when surface porosity is kept constant ($\unicode[STIX]{x1D719}=75\,\%$). The finite-time Lyapunov exponent and phase-averaged vorticity field derived from particle image velocimetry data are presented to reveal the evolution of the vortical structures. A mechanism associated with vorticity cancellation is proposed to explain the formation of downstream transmitted vortex rings; and both the vortex ring trajectory and the time-mean flow feature are compared between different cases. It is found that the hole diameter significantly influences the evolution of the flow structures on both the upstream and downstream sides of the porous wall. In particular, for a porous wall with a small hole diameter ($d_{h}^{\ast }=0.067$, 0.10 and 0.133), the transmitted finger-type jets will reorganize into a well-formed transmitted vortex ring in the downstream flow. However, for the case of a large hole diameter of $d_{h}^{\ast }=0.20$, the transmitted vortex ring is not well formed because of insufficient vorticity cancellation. Additionally, the residual vorticity gradually evolves into discrete jet-like structures downstream, which further weaken the intensity of the transmitted vortex ring. Consequently, the transmitted flow structures for the $d_{h}^{\ast }=0.20$ case would lose coherence more easily (or probably even transition to turbulence), resulting in a faster decay of the axial velocity and stronger entrainment of the transmitted jet. For all porous wall cases, the velocity profile of the transmitted jet exhibits self-similar behaviour in the far field ($z/D_{0}\geqslant 6.03$), which agrees well with the velocity distribution of free synthetic jets. With the help of the control-volume approach, the time-mean drag of the porous wall is evaluated experimentally for the first time. It is shown that the porous wall drag increases with the decrease in the hole diameter. Moreover, for a porous wall with a small hole diameter ($d_{h}^{\ast }=0.067$, 0.10 and 0.133), it appears that the porous wall drag mainly derives from the viscous effect. However, as $d_{h}^{\ast }$ increases to 0.20, the form drag associated with the porous wall geometry becomes significant.

High-resolution SIMS U–Pb dating of metamorphic zircons of the TTG gneisses, gneissic granitoid and amphibolites of the Lushan terrane, Taihua metamorphic complex, suggests that the metamorphism had taken place at least as early as ~1.96–1.86 Ga. These new dates, along with reference data, demonstrate that the southern and middle terranes of the Trans-North China Orogen had been involved in the continent–continent collision between the Western Block and the Eastern Block of the North China Craton. This orogenic process started as early as 1.96 Ga and lasted as late as 1.80 Ga.

While rabies is a significant public health concern in China, the epidemiology of animal rabies in the north and northwest border provinces remains unknown. From February 2013 to March 2014, seven outbreaks of domestic animal rabies caused by wild carnivores in Xinjiang (XJ) and Inner Mongolia (IM) Autonomous Regions, China were reported and diagnosed in brain samples of infected animals by the fluorescent antibody test (FAT) and RT–PCR. Ten field rabies viruses were obtained. Sequence comparison and phylogenetic analysis based on the complete N gene (1353 bp) amplified directly from the original brain tissues showed that these ten strains were steppe-type viruses, closely related to strains reported in Russia and Mongolia. None had been identified previously in China. The viruses from XJ and IM clustered separately into two lineages showing their different geographical distribution. This study emphasizes the importance of wildlife surveillance and of cross-departmental cooperation in the control of transboundary rabies transmission.

Nowadays, finding ceramic materials with good physical-chemistry characteristics to make ceramic cups is no longer a big difficulty. However, the stability of the construction, the anti-penetration ability and the adaptability of the working profile of the hat face of the ceramic cup are of critical importance to prolong the campaign life of the ceramic cup itself and thus the BF hearth. In a lot of cases, the so-called “ceramic cup” is formed just by one, two or more rings of the standard-shaped ceramic bricks which are installed closely against the carbon hot face. In these linings, there are many penetrating linear joints from the hot face to the cold face through the ceramic lining. Both the overall stability of the construction and the anti-penetration ability of the lining are very poor. Therefore, the goal of installing a ceramic cup, to protect the carbon lining from the erosion of hot metal, would be difficult to achieve and the lifetime of the ceramic cup would not be long no matter what excellent materials were being used. However, an “Integrated Ceramic Cup” structure for the BF hearth is composed of special-shaped ceramic blocks which are all interlocked with each other. In such a construction, there is no linear breakthrough joint from the hot face to the cold face of the ceramic lining. A ceramic lining with this structure can effectively avoid hot metal and gases penetrating into and then through the joints of the ceramic lining to attack the carbon lining behind. As a result, the campaign life of the BF hearth, and also the campaign life of the blast furnace, would be prolonged. Nowadays the “Integrated Ceramic Cup” structure has been used in many modern blast furnaces and its significant performance has been proved.

Three pairs of primers were designed for amplification of the adiponectin gene in geese (Anser demeatica) based on the published sequences of chicken, duck and other adiponectin homologues. The complete 1062 bp sequence of the adiponectin gene in geese, obtained by polymerase chain reaction (PCR) amplification and splicing, contained two exons and one intron. The coding sequence was 738 bp long and included codes for 245 amino acids (GenBank Accession No. EU370686). The coding sequence and the corresponding protein of goose adiponectin shared the highest homology with ducks, 94.85% and 95.51%, respectively; homology with chicken adiponectin was next highest, while the lowest homology was to be found with mammals. The predicted molecular weight (MW) and isoelectric point (pI) were 26,603.3 Da and pH 5.19, respectively, which were highly similar to those of species considered above. Reverse transcription-PCR revealed that goose adiponectin mRNA was highly expressed in skeletal muscle, fatty tissue, heart and stomach muscles. Medium levels of expression were detected in the small intestine, stomach glandular tissue, kidney and lung, while it was only weakly expressed in the liver, spleen, ovaries and diencephalon.

To identify the disease-causing gene for a large multi-generational Chinese family affected by familial hypertrophic cardiomyopathy (FHCM), genome-wide screening was carried out in a Chinese family with FHCM using micro-satellite markers, and linkage analysis was performed using the MLINK program. The disease locus was mapped to 1q32 in this family. Screening for a mutation in the cardiac troponin T (cTnT) gene was performed by a PCR and sequencing was done with an ABI Prism 3700 sequencer. A novel C→G transition located in the ninth exon of the cTnT gene, leading to a predicted amino acid residue change from Ile to Met at codon 90, was identified in all individuals with hypertrophic cardiomyopathy (HCM). The results presented here strongly suggest that Ile90Met, a novel mutation in the cTnT gene, is causative agent of HCM in this family.

After seven generations of self-crossing assisted by β-glucuronidase (GUS) detection, 26 homozygous transgenic rice lines were obtained. Transgene effects on iron content, agronomic traits, rice quality and stress tolerance were studied. The results indicated that the average iron content in the milled grain of the transgenic (pea ferritin, Fer) rice (Oryza sativa) was 10.37 μg/g among all the homozygous lines, and only four lines (Fer34, Fer36, Fer39 and Fer65) had significantly higher iron contents than that of the control, Xiushui11 (6.46 μg/g). Significant differences in main agronomic traits, such as days from sowing to heading, plant height, main panicle length, total grains of main panicle, seed setting rate, 1000-grain weight, and yield per plant were observed among some homozygous lines, but similar flag leaf length and number of panicles per plant were found. This showed that insertion of the foreign gene (Fer) had a slight impact on the main agronomic traits, but that the transgene had no negative effects. The quality traits of homozygous rice lines, such as the percentage of brown rice, milled rice and full milled rice, grain length, grain width, ratio of grain length and width, and amylose content were all similar to those of the control. However, variations were noticed in chalkiness, translucency, alkali spreading value and gel consistency among partial homozygous lines. Responses of homozygous lines to low and high temperatures were not significantly correlated with the iron contents, and resistance to rice blast (Pyricularia oryzae), bacterial blight (Xanthomonas oryzae) and brown planthopper (Niaparvata lugens) were enhanced with increased iron contents.

Two microsatellite markers OarHH35 and BMS2508, closely associated with high levels of reproduction in sheep, were analysed for polymorphisms in Xiangdong black goat, Nanjiang brown goat, Guizhou black goat and Boer goat. The number of alleles for OarHH35 was 11, 8, 7 and 10, respectively, in the four goat breeds. That for BMS2508 was 9, 5, 6 and 7. The polymorphic information content (PIC) values for OarHH35/BMS2508 in the above-mentioned goats were respectively 0.8294/0.8047, 0.8399/0.6894, 0.7985/0.6910 and 0.8582/0.7688. By analysing the dominant effect of the two microsatellite markers on litter size of Xiangdong black goat, it was shown that microsatellite markers BMS2508 and OarHH35 significantly influenced (P<0.05) litter size of goats. At the OarHH35 locus, the least squares means (LSM) of genotype 135/135 bp was the highest (3.67 number born/litter). Moreover, LSM of genotypes 123/135 bp and 125/125 bp also reached 3.00 kids born/litter, indicating that alleles 135 bp and 125 bp exerted a significant positive effect on the litter size in Xiangdong black goat. At the BMS2508 locus, LSM of genotypes 132/145 bp and 93/132 bp for litter size was 4.00 and 3.25 kids born/litter respectively, but that of genotype 122/122 bp for litter size was only 1.00 kid/litter, so alleles 145 bp and 93 bp had significant positive effects on the litter size of Xiangdong black goat, and the allele 122 bp had a significantly negative effect.