To send content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about sending content to .
To send content items to your Kindle, first ensure email@example.com
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about sending to your Kindle.
Note you can select to send to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be sent to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
A study of small-amplitude shape oscillations of a viscous compound droplet suspended in a viscous host fluid is performed. A generalized eigenvalue problem is formulated and is solved by using the spectral method. The effects of the relevant non-dimensional parameters are examined for three cases, i.e. a liquid shell in a vacuum and a compound droplet in a vacuum or in a host fluid. The fundamental mode $l=2$ is found to be dominant. There exist two oscillatory modes: the in phase and the out of phase. In most situations, the interfaces oscillate in phase rather than out of phase. For the in-phase mode, in the absence of the host, as the viscosity of the core or the shell increases, the damping rate increases whereas the oscillation frequency decreases; when the viscosity exceeds a critical value, the mode becomes aperiodic with the damping rate bifurcating into two branches. In addition, when the tension of the inner interface becomes smaller than some value, the in-phase mode turns aperiodic. In the presence of the unbounded host fluid, there exists a continuous spectrum. The viscosity of the host may decrease or increase the damping rate of the in-phase mode. The mechanism behind it is discussed. The density contrasts between fluids affect oscillations of the droplet in a complicated way. Particularly, sufficiently large densities of the core or the host lead to the disappearance of the out-of-phase mode. The thin shell approximation predicts well the oscillation of the compound droplet when the shell is thin.
In this paper, we present a method for generating a copula by composing two arbitrary n-dimensional copulas via a vector of bivariate functions, where the resulting copula is named as the multivariate composite copula. A necessary and sufficient condition on the vector guaranteeing the composite function to be a copula is given, and a general approach to construct the vector satisfying this necessary and sufficient condition via bivariate copulas is provided. The multivariate composite copula proposes a new framework for the construction of flexible multivariate copula from existing ones, and it also includes some known classes of copulas. It is shown that the multivariate composite copula has a clear probability structure, and it satisfies the characteristic of uniform convergence as well as the reproduction property for its component copulas. Some properties of multivariate composite copulas are discussed. Finally, numerical illustrations and an empirical example on financial data are provided to show the advantages of the multivariate composite copula, especially in capturing the tail dependence.
Carrier-based unmanned aerial aircraft (UAV) structure is subjected to severe tensile load during takeoff, especially the drawbar, which affects its fatigue performance and structural safety. However, the complex structural features pose great challenges for the engineering design. Considering this situation, a structural design, fatigue analysis, and parameters optimisation joint working platform are urgently needed to solve this problem. In this study, numerical analysis of strain fatigue is carried out based on the laboratory fatigue failure of the carrier-based aircraft drawbar. Taking the sensitivity of drawbar parameters to stress and life into account and optimum design of drawbar with fatigue life as a target using the parametric method, this study also includes cutting-edge parameters of milling cutters, structural details of the drawbar and so on. Then an experimental design is applied using the Latin hypercube sampling method, and a surrogate model based on RBF neural network is established. Lastly, a multi-island genetic algorithm is introduced for optimisation. The results show that the error between the obtained optimal solution and simulation is 0.26%, while the optimised stress level is reduced by 15.7%, and the life of the drawbar is increased by 122%.
The aim of this study was to investigate risk factors and psychological stress of health-care workers (HCWs) with coronavirus disease 2019 (COVID-19) in a nonfrontline clinical department.
Data of 2 source patients and all HCWs with infection risk were obtained in a department in Wuhan from January to February 2020. A questionnaire was designed to evaluate psychological stress of COVID-19 on HCWs.
The overall infection rate was 4.8% in HCWs. Ten of 25 HCWs who contacted with 2 source patients were diagnosed with confirmed COVID-19 (8/10) and suspected COVID-19 (2/10). Other 2 HCWs were transmitted by other patients or colleagues. Close care behaviors included physical examination (6/12), life nursing (4/12), ward rounds (4/12), endoscopic examination (2/12). Contacts fluctuated from 1 to 24 times and each contact was short (8.1 min ± 5.6 min). HCWs wore surgical masks (11/12), gloves (7/12), and isolation clothing (3/12) when providing medical care. Most HCWs experienced a mild course with 2 asymptomatic infections, taking 9.8 d and 20.9 d to obtain viral shedding and clinical cure, respectively. Psychological stress included worry (58.3%), anxiety (83.3%), depression (58.3%), and insomnia (58.3%).
Close contact with COVID-19 patients and insufficient protection were key risk factors. Precaution measures and psychological support on COVID-19 is urgently required for HCWs.
In the alloy materials, their mechanical properties mightly rely on the compositions and concentrations of chemical elements. Therefore, looking for the optimum elemental concentration and composition is still a critical issue to design high-performance alloy materials. Traditional alloy designing method via “trial and error” or domain experts’ experiences is barely possible to solve the issue. Here, we propose a “composition-oriented” method combined machine learning to design the Cu–Zn alloys with the high strengths, high ductility, and low friction coefficient. The method of separate training for each attribute label is used to study the effects of elemental concentrations on the mechanical properties of Cu–Zn alloys. Moreover, the elemental concentrations of new Cu–Zn alloys with the good mechanical properties are predicted by machine learning. The current results reveal the vital importance of the “composition-oriented” design method via machine learning for the development of high-performance alloys in a broad range of elemental compositions.
Identifying risk factors and mortality of individuals with Alzheimer’s disease (AD) could have important implications for the clinical management of AD.
This pilot study aimed to examine the overall mortality of AD patients over a 10-year surveillance period in Shanghai, China. This study is an extension of our previous investigation on mortality of neurodegenerative diseases.
One hundred and thirty-two AD patients recruited from the memory clinics of two hospitals in Shanghai in 2007 were followed up until December 31, 2017 or death, representing a follow-up period of up to 10 years. Overall standardized mortality ratios (SMRs) were calculated, and predictors for survival at recruitment were estimated.
Sixty-seven patients had died by December 31, 2017, and the SMR at 10 years of follow-up was 1.225 (95% confidence interval 0.944–1.563). Employing Cox’s proportional hazard modeling, lower Mini-Mental State Examination score, and comorbid diabetes predicted poor survival in this cohort.
This pilot study suggests a similar survival trend of patients with AD compared to the general population in Shanghai urban region. Poor cognitive status and comorbid diabetes had a negative impact on the survival of AD patients.
Bismuth (Bi)-based photocatalytic materials are widely used in the field of photocatalytic degradation of wastewater. In this study, β-Bi2O3/BiOBr heterojunction photocatalysts were prepared by an in situ chemical transformation method. BiOBr molecules are arrayed to cross each other to form a pore around β-Bi2O3. The prepared photocatalyst had a large specific surface area and excellent adsorption and photocatalytic properties. The β-Bi2O3/BiOBr with a molecular ratio of 11.1% had the highest catalytic activity. The result of a degradation experiment, performed with Rhodamine B (RhB) as the target pollutant, revealed that the degradation rate reached 99.85% after 25 min under visible light irradiation. The pore structure can adsorb contaminants and the heterojunction facilitates the separation of photogenerated electron–hole pairs to enhance the photocatalytic properties. The high adsorption performance and heterojunction achieved higher photocatalytic efficiency. This semiconductor photocatalyst with high adsorption performance provides a new approach to control water pollution.
In this paper a one-dimensional numerical study on the nonlinear behaviour of an electrically charged jet of Oldroyd-B viscoelastic, Taylor–Melcher leaky dielectric liquid is carried out. The effect of surface charge level, axial wavenumber and finite conductivity on the nonlinear evolution of the jet is investigated. Different structures including beads-on-a-string with/without satellite droplets, quasi-spikes and spikes are detected, and their domains in the plane of the non-dimensional axial wavenumber and the electrical Bond number are illustrated. The underlying mechanisms in the formation of the structures are examined. It is found that tangential electrostatic force plays a key role in the formation of a quasi-spike structure. Decreasing liquid conductivity may lead to a decrease in the size of satellite droplets or even the complete removal of them from a beads-on-a-string structure, induce the transition from a beads-on-a-string to a quasi-spike structure or postpone the appearance of a spike. On the other hand, finite conductivity has little influence on filament thinning in a beads-on-a-string structure, owing to the fact that the electrostatic forces are of secondary importance compared with the capillary force. The difference between the finite conductivity, large conductivity and other cases is elucidated. An experiment is carried out to observe spike structures.
Swelling deformation tests of Kunigel bentonite and its sand mixtures were performed in distilled water and NaCl solution. The salinity of NaCl solution has a significant impact on the swelling properties of bentonite, but not on its surface structure. The surface structure was characterized using the fractal dimension Ds. Based on the fractal dimension, a unique curve of the em–pe relationship (em is the void ratio of montmorillonite and pe is the effective stress) at full saturation was introduced to express the swelling deformation of bentonite–sand mixtures. In mixtures with a large bentonite content, the swelling deformation always followed the em–pe relationship. In mixtures with a small bentonite content, when the effective stress reached a threshold, the void ratio of montmorillonite em deviated from the unique em–pe curve due to the appearance of a sand skeleton. The threshold of vertical pressure for mixtures in different solutions and the maximum swelling strains were estimated using the em–pe relationship. The good agreement between estimates and experimental data suggest that the em–pe relationship might be an alternative method for predicting the swelling deformation of bentonite–sand mixtures in salt solution.
Although the streaked optical pyrometer (SOP) system has been widely adopted in shock temperature measurements, its reliability has always been of concern. Here, two calibrated Planckian radiators with different color temperatures were used to calibrate and verify the SOP system by comparing the two calibration standards using both multi-channel and single-channel methods. A high-color-temperature standard lamp and a multi-channel filter were specifically designed for the measurement system. To verify the reliability of the SOP system, the relative deviation between the measured data and the standard value of less than 5% was calibrated out, which demonstrates the reliability of the SOP system. Furthermore, a method to analyze the uncertainty and sensitivity of the SOP system is proposed. A series of laser-induced shock experiments were conducted at the ‘Shenguang-II’ laser facility to verify the reliability of the SOP system for temperature measurements at tens of thousands of kelvin. The measured temperature of the quartz in our experiments agreed fairly well with previous works, which serves as evidence for the reliability of the SOP system.
Kawasaki disease, which is characterised by systemic vasculitides accompanied by acute fever, is regularly treated by intravenous immunoglobulin to avoid lesion formation in the coronary artery; however, the mechanism of intravenous immunoglobulin therapy is unclear. Hence, we aimed to analyse the global expression profile of serum exosomal proteins before and after administering intravenous immunoglobulin.
Two-dimensional electrophoresis coupled with mass spectrometry analysis was used to identify the differentially expressed proteome of serum exosomes in patients with Kawasaki disease before and after intravenous immunoglobulin therapy.
Our analysis revealed 69 differential protein spots in the Kawasaki disease group with changes larger than 1.5-fold and 59 differential ones in patients after intravenous immunoglobulin therapy compared with the control group. Gene ontology analysis revealed that the acute-phase response disappeared, the functions of the complement system and innate immune response were enhanced, and the antibacterial humoral response pathway of corticosteroids and cardioprotection emerged after administration of intravenous immunoglobulin. Further, we showed that complement C3 and apolipoprotein A-IV levels increased before and decreased after intravenous immunoglobulin therapy and that the insulin-like growth factor-binding protein complex acid labile subunit displayed reverse alteration before and after intravenous immunoglobulin therapy. These observations might be potential indicators of intravenous immunoglobulin function.
Our results show the differential proteomic profile of serum exosomes of patients with Kawasaki disease before and after intravenous immunoglobulin therapy, such as complement C3, apolipoprotein A-IV, and insulin-like growth factor-binding protein complex acid labile subunit. These results may be useful in the identification of markers for monitoring intravenous immunoglobulin therapy in patients with Kawasaki disease.
Tungstate based phosphors have efficient absorption in the UV region and can be used for UV-pumped light emitting. For novel and effective materials and synthesis methods in this system, a series of Eu3+ and Tb3+ co-doped NaY(WO4)2 phosphors have been synthesized via the molten salt method. The powder X-ray diffraction (PXRD) patterns, scanning electronic microscope (SEM), and photoluminescent spectra have been characterized for the prepared samples. The results show the flux (NaCl) not only decreases the reaction temperature (700–900 °C) than the normal solid state synthesis (∼1000 °C), but also controls the morphology of the products. The shape and size of products can be changed simply and effectively by the reaction conditions, such as temperature and heating time. It is also found that the emission colors of the samples can be tuned from red to green by simply adjusting the doping concentrations of Eu3+ and Tb3+ ions under the same wave length excitation, which has potential applications for multi-color display and illumination as a single-component phosphor.
The CMP challenges for advanced technology nodes are discussed. Global and local uniformity challenges and their cumulative effects are presented. Uniformity improvements for advanced node integration were achieved through slurry, pad and platen optimization, innovative integration schemes, the reduction of incoming variation and the reduction of cumulative effects. We discuss reduction of typical CMP defect types. Defects resulting from simple mechanisms (foreign material, polish residues) and those resulting from chemical and physical interactions (corrosion, chemical attack, scratches, physical migration) and strategies for control are studied. Defectivity reduction measures include new post-CMP clean chemicals, new slurries and pads and reduction of incoming defectivity. Finally we discuss an observed tradeoff between good defectivity and good uniformity.
SG-III laser facility is now the largest laser driver for inertial confinement fusion research in China. The whole laser facility can deliver 180 kJ energy and 60 TW power ultraviolet laser onto target, with power balance better than 10%. We review the laser system and introduce the SG-III laser performance here.
Postnatal rapid growth by excess intake of nutrients has been associated with an increased susceptibility to diseases in neonates with intra-uterine growth restricted (IUGR). The aim of the present study was to determine whether postnatal nutritional restriction could improve intestinal development and immune function of neonates with IUGR using piglets as model. A total of twelve pairs of normal-birth weight (NBW) and IUGR piglets (7 d old) were randomly assigned to receive adequate nutrient intake or restricted nutrient intake (RNI) by artificially liquid feeding for a period of 21 d. Blood samples and intestinal tissues were collected at necropsy and were analysed for morphology, digestive enzyme activities, immune cells and expression of innate immunity-related genes. The results indicated that both IUGR and postnatal nutritional restriction delayed the growth rate during the sucking period. Irrespective of nutrient intake, piglets with IUGR had a significantly lower villous height and crypt depth in the ileum than the NBW piglets. Moreover, IUGR decreased alkaline phosphatase activity while enhanced lactase activity in the jejunum and mRNA expressions of Toll-like receptor 9 (TLR-9) and DNA methyltransferase 1 (DNMT1) in the ileum of piglets. Irrespective of body weight, RNI significantly decreased the number and/or percentage of peripheral leucocytes, lymphocytes and monocytes of piglets, whereas the percentage of neutrophils and the ratio of CD4+ to CD8+ were increased. Furthermore, RNI markedly enhanced the mRNA expression of TLR-9 and DNMT1, but decreased the expression of NOD2 and TRAF-6 in the ileum of piglets. In summary, postnatal nutritional restriction led to abnormal cellular and innate immune response, as well as delayed the growth and intestinal development of IUGR piglets.
The present study was performed to test the predictive value of different cut-off points of anthropometric parameters for the presence of type 2 diabetes (T2DM) or glucose tolerance abnormalities in north-east Chinese adults.
Multistage random cluster sampling method in a cross-sectional study.
Height, body weight, maximal body weight in the past, waist and hip circumferences, blood pressure, 2 h post-load glucose and other lifestyle factors were measured.
We used data from 1058 adults aged 20 years or over, selected in the city of Mudanjiang, in 2005.
BMI, maximal BMI in the past (MAXBMI), waist:hip ratio (WHR), waist:height ratio (WHtR) and waist circumference (WC) were significantly correlated with each other. Partial correlation coefficients between WHtR and WC, and between MAXBMI and BMI, were higher than those between the other indices. The association of anthropometric indices with T2DM or glucose tolerance abnormalities was significantly highest for the collaboration cut-off points of MAXBMI (≥23·0 kg/m2 for T2DM, ≥22·0 kg/m2 for glucose tolerance abnormalities) with WHtR (≥0·52). Areas under the receiver-operating characteristic curves also showed that WHtR was a better anthropometric index that discriminated between the presence and absence of T2DM and an excellent indicator with high Youden’s index.
MAXBMI combined with WHtR was a better anthropometric index associated with T2DM or glucose tolerance abnormalities. The combined use of these two measures is a good choice for T2DM prevention and screening.
The fabrication of Ce3+-doped lutetium oxyorthosilicate (Lu2SiO5:Ce, LSO:Ce) scintillation ceramics was investigated by pressureless sintering starting from synthetic submicrometer polycrystalline LSO:Ce powder. It was found that translucent LSO ceramics were densified successfully with relative density of 99.5% under sintering condition of 1720 °C for 4 h. As-sintered LSO ceramics were pore-free with average grain size of 5 μm and exhibited a translucent state. The broad emission spectra centered at 419 nm of the LSO:Ce ceramics under vacuum ultraviolet (VUV) and UV excitation at room temperature. Under x-ray excitation, the overall emission intensity of obtained LSO ceramics achieved twice of that of bismuth germanium oxide (also known as bismuth germanate) single crystal at room temperature. Under excitation of 356 nm and emission of 420 nm, the luminescence decay time of the obtained LSO scintillation ceramics reached only 21.2 ns. The light yield of the LSO ceramics was 21,300 ph/MeV, which reached 91% of that of LSO single crystal.