Cellulitis is a common infection of the skin and soft tissue. Susceptibility to cellulitis is related to microorganism virulence, the host immunity status and environmental factors. This retrospective study from 2001 to 2013 investigated relationships between the monthly incidence rate of cellulitis and meteorological factors using data from the Taiwanese Health Insurance Dataset and the Taiwanese Central Weather Bureau. Meteorological data included temperature, hours of sunshine, relative humidity, total rainfall and total number of rainy days. In otal, 195 841 patients were diagnosed with cellulitis and the incidence rate was strongly correlated with temperature (γS = 0.84, P < 0.001), total sunshine hours (γS = 0.65, P < 0.001) and total rainfall (γS = 0.53, P < 0.001). The incidence rate of cellulitis increased by 3.47/100 000 cases for every 1° elevation in environmental temperature. Our results may assist clinicians in educating the public of the increased risk of cellulitis during warm seasons and possible predisposing environmental factors for infection.

Interfacial reactions at 100 and 150 °C in the Sn–20.48 at.% In–3.05 at.% Ag (Sn–20.0 wt% In–2.8 wt% Ag)/Ni couples are studied. Three unusual phenomena are observed. First, liquation is found in Sn–20.48 at.% In–3.05 at.% Ag (Sn–In–Ag)/Ni couples that are reacted at 150 °C, which is lower than the melting points of both the solder and the Ni substrate. In addition to the Ni3Sn4 phase, liquid phase is formed in the reaction layer. Second, the liquid phase disappears and isothermal solidification occurs when there is prolonged isothermal heat treatment at 150 °C. The results are similar to those for transient liquid phase bonding. Third, the thickness of the reaction layer in Sn–In–Ag/Ni couples that are reacted for 1440 h at 150 °C is 40 times thicker than that of those reacted at 100 °C. The reaction mechanisms for these three unusual phenomena: liquation, isothermal solidification, and an extraordinary increase in the reaction rate for only 50 °C difference in temperature are elaborated and are related to each other.

The electrode materials for VRFB should possess higher electric conductivity, corrosion resistance and hydrophilic properties in sulfuric acid. The characteristics of the electrode materials affect the stability and the energy efficiency of VRFB. Carbon materials are the best suited for VRFB applications. In this study, the calcined treatment, acid treatment and ozone treatment were used to modify the surface of carbon papers. The redox reaction of [VO]2+/[VO2]+ on the modified carbon papers was evaluated by cyclic voltammetry (CV). The surface compositions of carbon materials were analyzed by X-ray photoelectron spectrometry (XPS). The experimental results reveal that three oxidative methods enhance the redox reaction of [VO]2+/[VO2]+. The calcined treatments and acid treatments also enhanced hydrolysis reaction. The mole ratio of O/C apparently increased, but the binding energy of C1s and O1s were not chemically shifted in the acid treatment. The intensity of binding energy of O1s, between 532 eV and 534 eV, apparently increased in the ozone and calcined treatments. The Ox treated samples were more hydrophilic than the Oz treated samples. In the Ox treated samples, the decrease of Rct value indicates that was contributed from the redox reaction of [VO]2+/[VO2]+ and hydrolysis reaction. It does not completely benefit the energy efficiency of VRFB. The 5 x 5 cm2 modified carbon papers were used as electrode materials in the VRFB. The voltage efficiency, coulomb efficiency and energy efficiency reached 93 %, 90 % and 83 %, respectively, at a current density of 12 mA．cm-2 at 0.8-1.8 V.

Sn/Ni–8.0 at.%V (Ni–7.0 wt%V) couples are prepared and the interfacial reactions at 210 and 250 °C are examined. In the early stage of reaction at 250 °C, a T phase is formed as a result of fast diffusion of Sn into the Ni–8.0 at.%V substrate. With a longer reaction, the outer region of the T phase transforms to a Ni-depletion layer, which has not been observed previously. Both the T phase and the Ni-depletion layer are analyzed using transmission electronic microscopy. This newly found Ni-depletion layer is composed of Sn and nanosize “VSn2(V2Sn3)” particulates. The solid/solid reaction paths in the Sn/Ni–8.0 at.%V couples evolve from Sn/T/Ni–V, Sn/Ni3Sn4/T/Ni–V to Sn/Ni3Sn4/VSn2(V2Sn3). During the liquid/solid reactions, the paths are liquid/T/Ni–V, liquid/liquid + Ni3Sn4/T/Ni–V, liquid/liquid + Ni3Sn4/liquid + VSn2(V2Sn3)/T/Ni–V, and liquid/liquid + Ni3Sn4/liquid + VSn2(V2Sn3).

Dental remineralization may be achieved by mediating the interactions between tooth surfaces with free ions and biomimetic peptides. We recently developed octuplet repeats of aspartate-serine-serine (DSS-8) peptide, which occurs in high abundance in naturally occurring proteins that are critical for tooth remineralization. In this paper, we evaluated the possible role of DSS-8 in dentin remineralization. Human dentin specimens were demineralized, exposed briefly to DSS-8 solution, and then exposed to concentrated ionic solutions that favor remineralization. Dentin nano-mechanical behaviors, hardness and elastic modulus, at various stages of treatment were determined by nanoindentation. The phase, microstructure and morphology of the resultant surfaces were characterized using grazing incidence X-ray diffraction, variable pressure scanning electron microscopy, and atomic force microscopy, respectively. Nanoindentation results show that DSS-8 remineralization effectively improves the mechanical and elastic properties of native dentin. Moreover, the hardness and elastic modulus for the DSS-8 treated dentin were significantly higher than surfaces remineralized without DSS-8.

Dental remineralization may be achieved by mediating the interactions between tooth surfaces with free ions and biomimetic peptides. We recently developed octuplet repeats of aspartate-serine-serine (DSS-8) peptide, which occurs in high abundance in naturally occurring proteins that are critical for tooth remineralization. In this paper, we evaluated the possible role of DSS-8 in enamel remineralization. Human enamel specimens were demineralized, exposed briefly to DSS-8 solution, and then exposed to concentrated ionic solutions that favor remineralization. Enamel nano-mechanical behaviors, hardness and elastic modulus, at various stages of treatment were determined by nanoindentation. The phase, microstructure and morphology of the resultant surfaces were characterized using the grazing incidence X-ray diffraction (GIXD), variable pressure scanning electron microscopy (VPSEM), and atomic force microscopy (AFM), respectively. Nanoindentation results show that the DSS-8 remineralization effectively improves the mechanical and elastic properties for demineralized enamel.

The Republic of China on the island of Taiwan has experienced at least 20 terrorist events since 1979, including 13 aircraft hijackings and five bombings. Factors responsible for the relatively small burden of terrorism on Taiwan in the past include tight military control over political dissent until 1987, a warming relationship with the People's Republic of China in the 1990s, political inclusion of major internal cultural groups, geographic isolation, and a lack of other significant international enemies. Nevertheless, today Taiwan faces a new prospect of terrorism by adversaries of the United States and its allies and by an international paradigm shift in the types of weapons used by terrorists.

National emergency management has been enhanced significantly since the Ji Ji earthquake in 1999, including the assignment of lead government agencies to the planning and preparedness for specific types of terrorist events involving nuclear, biological, and/or chemical releases. Other significant improvements at the operations level, include the establishment of two national disaster medical assistance teams, four urban search and rescue teams, 13 local disaster medical assistance teams, and eight chemical emergency response hospitals. Future challenges include improving the coordination of inter-agency response at the national level and the quantity and quality of local disaster response assets.