The purpose of this study was to analyse the clinical characteristics of patients with severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) PCR re-positivity after recovering from coronavirus disease 2019 (COVID-19). Patients (n = 1391) from Guangzhou, China, who had recovered from COVID-19 were recruited between 7 September 2021 and 11 March 2022. Data on epidemiology, symptoms, laboratory test results and treatment were analysed. In this study, 42.7% of recovered patients had re-positive result. Most re-positive patients were asymptomatic, did not have severe comorbidities, and were not contagious. The re-positivity rate was 39%, 46%, 11% and 25% in patients who had received inactivated, mRNA, adenovirus vector and recombinant subunit vaccines, respectively. Seven independent risk factors for testing re-positive were identified, and a predictive model was constructed using these variables. The predictors of re-positivity were COVID-19 vaccination status, previous SARs-CoV-12 infection prior to the most recent episode, renal function, SARS-CoV-2 IgG and IgM antibody levels and white blood cell count. The predictive model could benefit the control of the spread of COVID-19.

We report dispersion management based on a mismatched-grating compressor for a 100 PW level laser, which utilizes optical parametric chirped pulse amplification and also features large chirped pulse duration and an ultra-broadband spectrum. The numerical calculation indicates that amplified pulses with 4 ns chirped pulse duration and 210 nm spectral bandwidth can be directly compressed to sub-13 fs, which is close to the Fourier-transform limit (FTL). More importantly, the tolerances of the mismatched-grating compressor to the misalignment of the stretcher, the error of the desired grating groove density and the variation of material dispersion are comprehensively analyzed, which is crucially important for its practical application. The results demonstrate that good tolerances and near-FTL compressed pulses can be achieved simultaneously, just by keeping a balance between the residual second-, third- and fourth-order dispersions in the laser system. This work can offer a meaningful guideline for the design and construction of 100 PW level lasers.

In this paper, we report the recent progress on the $1~\text{PW}/0.1~\text{Hz}$ laser beamline of Shanghai Superintense Ultrafast Laser Facility (SULF). The SULF-1 PW laser beamline is based on the double chirped pulse amplification (CPA) scheme, which can generate laser pulses of 50.8 J at 0.1 Hz after the final amplifier; the shot-to-shot energy fluctuation of the amplified pulse is as low as 1.2% (std). After compression, the pulse duration of 29.6 fs is achieved, which can support a maximal peak power of 1 PW. The contrast ratio at $-80~\text{ps}$ before main pulse is measured to be $2.5\times 10^{-11}$. The focused peak intensity is improved by optimizing the angular dispersion in the grating compressor. The maximal focused peak intensity can reach $2.7\times 10^{19}~\text{W}/\text{cm}^{2}$ even with an $f/26.5$ off-axis parabolic mirror. The horizontal and vertical angular pointing fluctuations in 1 h are measured to be 1.89 and $2.45~\unicode[STIX]{x03BC}\text{rad}$, respectively. The moderate repetition rate and the good stability are desirable characteristics for laser–matter interactions. The SULF-1 PW laser beamline is now in the phase of commissioning, and preliminary experiments of particle acceleration and secondary radiation under 300–400 TW/0.1 Hz laser condition have been implemented. The progress on the experiments and the daily stable operation of the laser demonstrate the availability of the SULF-1 PW beamline.

Maternal supraphysiological estradiol (E2) environment during pregnancy leads to adverse perinatal outcomes. However, the influence of oocyte exposure to high E2 levels on perinatal outcomes remains unknown. Thus, a retrospective cohort study was conducted to explore the effect of high E2 level induced by controlled ovarian stimulation (COH) on further outcomes after frozen embryo transfer (FET). The study included all FET cycles (n = 10,581) between 2014 and 2017. All cycles were categorized into three groups according to the E2 level on the day of the human Chorionic Gonadotropin trigger. Odds ratios (ORs) and their confidence intervals (CIs) were calculated to evaluate the association between E2 level during COH and pregnancy outcomes and subsequent neonatal outcomes. From our findings, higher E2 level was associated with lower percentage of chemical pregnancy, clinical pregnancy, ongoing pregnancy, and live birth as well as increased frequency of early miscarriage. Preterm births were more common among singletons in women with higher E2 level during COH (aOR1 = 1.93, 95% CI: 1.22–3.06; aOR2 = 2.05, 95% CI: 1.33–3.06). Incidence of small for gestational age (SGA) was more common in both singletons (aOR1 = 2.01, 95% CI: 1.30–3.11; aOR2 = 2.51, 95% CI: 1.69–3.74) and multiples (aOR1 = 1.58, 95% CI: 1.03–2.45; aOR2 = 1.99, 95% CI: 1.05–3.84) among women with relatively higher E2 level. No association was found between high E2 level during COH and the percentage of macrosomia or large for gestational age. In summary, oocyte exposure to high E2 level during COH should be brought to our attention, since the pregnancy rate decreasing and the risk of preterm birth and SGA increasing following FET.

We present an investigation of the root-mean-square (r.m.s.) temperature $\unicode[STIX]{x1D70E}_{T}$ and the r.m.s. velocity $\unicode[STIX]{x1D70E}_{w}$ in the bulk of Rayleigh–Bénard turbulence, using new experimental data from the current study and experimental and numerical data from previous studies. We find that, once scaled by the convective temperature $\unicode[STIX]{x1D703}_{\ast }$, the value of $\unicode[STIX]{x1D70E}_{T}$ at the cell centre is a constant ($\unicode[STIX]{x1D70E}_{T,c}/\unicode[STIX]{x1D703}_{\ast }\approx 0.85$) over a wide range of the Rayleigh number ($10^{8}\leqslant Ra\leqslant 10^{15}$) and the Prandtl number ($0.7\leqslant Pr\leqslant 23.34$), and is independent of the surface topographies of the top and bottom plates of the convection cell. A constant close to unity suggests that $\unicode[STIX]{x1D703}_{\ast }$ is a proper measure of the temperature fluctuation in the core region. On the other hand, $\unicode[STIX]{x1D70E}_{w,c}/w_{\ast }$, the vertical r.m.s. velocity at the cell centre scaled by the convective velocity $w_{\ast }$, shows a weak $Ra$-dependence (${\sim}Ra^{0.07\pm 0.02}$) over $10^{8}\leqslant Ra\leqslant 10^{10}$ at $Pr\sim 4.3$ and is independent of plate topography. Similar to a previous finding by He & Xia (Phys. Rev. Lett., vol. 122, 2019, 014503), we find that the r.m.s. temperature profile $\unicode[STIX]{x1D70E}_{T}(z)/\unicode[STIX]{x1D703}_{\ast }$ in the region of the mixing zone with a mean horizontal shear exhibits a power-law dependence on the distance $z$ from the plate, but now the universal profile applies to both smooth and rough surface topographies and over a wider range of $Ra$. The vertical r.m.s. velocity profile $\unicode[STIX]{x1D70E}_{w}(z)/w_{\ast }$ obeys a logarithmic dependence on $z$. The study thus demonstrates that the typical scales for the temperature and the velocity are the convective temperature $\unicode[STIX]{x1D703}_{\ast }$ and the convective velocity $w_{\ast }$, respectively. Finally, we note that $\unicode[STIX]{x1D703}_{\ast }$ may be utilised to study the flow regime transitions in ultrahigh-$Ra$-number turbulent convection.

The finite element simulations show that non-equibiaxial residual stresses (RS) can shift the load–depth curve from the unstressed curve and cause elliptical remnant indentation in spherical indentation. Thus the relative load change between stressed and unstressed samples and the asymmetry of elliptical remnant indentation were employed as characteristic parameters to evaluate the magnitude and directionality of RS. Through theoretical and numerical analysis, the effects of RS on indentation load and remnant impression as well as the affect mechanism were systematically discussed. Finally, two equations which could provide foundations for establishing spherical indentation method to evaluate non-equibiaxial RS were obtained.

Introduction: The mortality of Parkinson’s disease (PD) and its associated risk factors among clinically definite PD patients in China has been rarely investigated. Our study aimed to identify the mortality rates and predictors of death in PD patients in China. Methods: 157 consecutive, clinically definite PD patients from the urban area of Shanghai were recruited from a central hospital based movement disorder clinic in 2006. All patients were regularly followed up at the clinic until December 31, 2011, or death. Mortality and associations with baseline demographics, health and medical factors were then determined within the cohort. Results: After 5 years, 11(7%) patients had died. The standardised mortality ratio was 0.62 (95% CI 0.32 to 1.07, P=0.104). The main causes of death were pneumonia (54.5%, 6/11) and digestive disorders (18.2%, 2/11), respectively. Age at onset, independent living, the mini mental state examination score, the Parkinson’s disease sleep scale score and the Epworth sleepiness scale score at baseline were statistically significantly different between the survival group and the deceased group (P<0.05). Across all participants, risk factors for death included low mini mental state examination score, and high Epworth sleepiness scale score according to a binary variable logistic regression analysis. Conclusions: This study confirms the similar survival of patients with PD to the control population up to a follow-up of 5 years. Interventions tailored to potential risk factors associated with death may offer further benefits.

The Doba gabbro was collected from an exploration well through the Cretaceous Doba basin of southern Chad. The gabbro is composed mostly of plagioclase, clinopyroxene and Fe–Ti oxide minerals and displays cumulus mineral textures. Whole-rock 40Ar–39Ar step-heating geochronology yielded a Late Permian plateau age of 257 ± 1 Ma. The major and trace elemental geochemistry shows that the gabbro is tholeiitic in composition and has trace element ratios (i.e. La/YbN > 7; Sm/YbPM > 3.4; Nb/Y > 1; Zr/Y > 5) indicative of a basaltic melt derived from a garnet-bearing mantle source. The moderately enriched Sr–Nd isotopes (i.e. ISr = 0.70495 to 0.70839; ɛNd(T) = −1.0 to −1.3) fall within the mantle array (i.e. OIB-like) and are similar to other Late Permian plutonic rocks of North-Central Africa (i.e. ISr = 0.7040 to 0.7070). The enriched isotopic composition of the Doba gabbro contrasts with the more depleted compositions of the spatially associated Neoproterozoic post-Pan-African within-plate granites. The contrasting Nd isotope composition between the older within-plate granites and the younger Doba gabbro indicates that different mantle sources produced the rocks and thus may mark the southern boundary of the Saharan Metacraton.

The goal of machining scheme selection (MSS) is to select the most appropriate machining scheme for a previously designed part, for which the decision maker must take several aspects into consideration. Because many of these aspects may be conflicting, such as time, cost, quality, profit, resource utilization, and so on, the problem is rendered as a multiobjective one. Consequently, we consider a multiobjective optimization problem of MSS in this study, where production profit and machining quality are to be maximized while production cost and production time must be minimized, simultaneously. This paper presents a new discrete method for particle swarm optimization, which can be widely applied in MSS to find out the set of Pareto-optimal solutions for multiobjective optimization. To deal with multiple objectives and enable the decision maker to make decisions according to different demands on each evaluation index, an analytic hierarchy process is implemented to determine the weight value of evaluation indices. Case study is included to demonstrate the feasibility and robustness of the hybrid algorithm. It is shown from the case study that the multiobjective optimization model can simply, effectively, and objectively select the optimal machining scheme according to the different demands on evaluation indices.

500 nm-thick aluminum-doped zinc oxide (ZnO:Al) thin film is usually used as a front transparent conductive oxide (TCO) contact on photovoltaic devices, and for this application is often deposited by a reactive radio-frequency (r.f.) magnetron sputtering system from a ceramic target. This work reports on the preparation and characterization of AZO thin films on Corning 1737 glass substrates grown by reactive r.f.-magnetron sputtering from a ZnO ceramic target with 2 wt% Al content. It was found that the growth parameters, such as chamber pressure, working power, and deposition temperature, have significant influences on the properties of AZO films. According to the experimental results: (1) Films were polycrystalline showing a strong preferred c-axis orientation. (2) With increasing working power, the resistivity decreased, and mobility and the carrier concentration increased. (3) Lower deposition temperature leads to a decrease in resistivity, with 2.5×10-4 Ω-cm representing the lowest resistivity reached.

This work reports on the fabrication and characterization of Mo thin films on soda-lime glass substrate grown by reactive RF magnetron sputtering. Film thickness was measured by x-ray step surface profiler. The structural properties and surface morphology were analyzed by x-ray diffraction (XRD), atomic force microscope (AFM) and scanning electron microscopy (SEM). Electrical properties were measured by four-point probe. It was found that the growth parameters, such as argon flow rate, RF power, film thickness, have significant influences on properties of Mo films. The strain on films revealed the complicated relationship with the working pressure, which might be associated with micro structures and impurities. In order to improve the adhesion and electricity, we adopted a two-pressure deposition scheme. The optimal thickness and sheet resistance are νm and 0.12 ω The mechanisms therein will be discussed in detail. Furthermore, we also investigated the diffusion property of Na ion of double Mo films sputtered on soda-lime glass. Our experimental results could lead to better understanding for improving further CIGS-based photovoltaic devices.