A 1–0·2 μm fraction from a soil in the Dominican Republic was studied by X-ray diffraction combined with solvation, cation saturation, and heat treatments. I.R., thermal (DTA, TGA) and chemical analyses were also made. This soil is saline and alkaline and its mineral composition is greatly influenced by the lacustrine parent material and poor drainage.

In addition to swelling chlorite, illite, kaolinite, carbonates and quartz are present in the 1–0·2 μm fraction. The swelling chlorite expanded to over 18 Å when Mg saturated and solvated with glycerol or water. Lower spacings with other cations and ethylene glycol were observed. 1 N HCl treatment partially removed the interlayer hydroxides in the chlorite and 6 N HCl destroyed the mineral. The mineral gave a reflection close to 14 Å up through 600°C but collapsed at higher temperatures to 10·2 Å.

Pulmonary hypertension is a complex and progressive condition that is either idiopathic or heritable, or associated with one or multiple health conditions, with or without congenital or acquired cardiovascular disease. Recent developments have tremendously increased the armamentarium of diagnostic and therapeutic approaches in children and young adults with pulmonary hypertension that is still associated with a high morbidity and mortality. These modalities include non-invasive imaging, pharmacotherapy, interventional and surgical procedures, and supportive measures. The optimal, tailored diagnostic and therapeutic strategies for pulmonary hypertension in the young are rapidly evolving but still face enormous challenges: Healthcare providers need to take the patient’s age, development, disease state, and family concerns into account when initiating advanced diagnostics and treatment. Therefore, there is a need for guidance on core and advanced medical training in paediatric pulmonary hypertension. The Association for European Paediatric and Congenital Cardiology working group “pulmonary hypertension, heart failure and transplantation” has produced this document as an expert consensus statement; however, all recommendations must be considered and applied in the context of the local and national infrastructure and legal regulations.

The influence of a strong external magnetic field on the collimation of a high Mach number plasma flow and its collision with a solid obstacle is investigated experimentally and numerically. The laser irradiation ( $I\sim 2\times 10^{14}~\text{W}\cdot \text{cm}^{-2}$ ) of a multilayer target generates a shock wave that produces a rear side plasma expanding flow. Immersed in a homogeneous 10 T external magnetic field, this plasma flow propagates in vacuum and impacts an obstacle located a few mm from the main target. A reverse shock is then formed with typical velocities of the order of 15–20 $\pm$ 5 km/s. The experimental results are compared with 2D radiative magnetohydrodynamic simulations using the FLASH code. This platform allows investigating the dynamics of reverse shock, mimicking the processes occurring in a cataclysmic variable of polar type.

The Lembo clay deposit occurs on orthogneiss, but it also comprises clays with litho-relicts of volcanic rocks. In this study, ten samples from two sites were investigated. The mineralogical compositions consisted of kaolinite + halloysite + illite + quartz + hematite + anatase ± rutile ± orthoclase ± sanidine ± magnetite ± maghemite ± goethite ± Ba-Al-Fe-phosphates ± carbonates ± sulphates. Kaolinite-halloysite and quartz are the prevailing minerals. Some volcanicderived clays contain Fe-rich kaolinite-halloysite (9.6–14.1 wt.% Fe2O3). The chemical compositions, colours and specific surface area (SSA) measurements reveal two groups of clays: one with a positive whiteness index (IB), small SSA and small Fe content, and the other showing a large SSA, negative IB and relatively large Fe contents. The compositions of the first group are close to those of clays from the Mayouom deposit (Cameroon), and from some European commercial kaolins used in ceramics. Relatively Fe-rich clay materials may conform to most formulations of earthen bricks. As a whole, the Lembo clay deposit comprises various compositions of kaolinitic clays, which may yield the opportunity for extensive application in ceramics.

A new target design is presented to model high-energy radiative accretion shocks in polars. In this paper, we present the experimental results obtained on the GEKKO XII laser facility for the POLAR project. The experimental results are compared with 2D FCI2 simulations to characterize the dynamics and the structure of plasma flow before and after the collision. The good agreement between simulations and experimental data confirms the formation of a reverse shock where cooling losses start modifying the post-shock region. With the multi-material structure of the target, a hydrodynamic collimation is exhibited and a radiative structure coupled with the reverse shock is highlighted in both experimental data and simulations. The flexibility of the laser energy produced on GEKKO XII allowed us to produce high-velocity flows and study new and interesting radiation hydrodynamic regimes between those obtained on the LULI2000 and Orion laser facilities.

Animal health planning activities are not always providing a satisfactory positive impact on herd health and welfare. Moreover, evaluating the impact of advisory programmes is complex due to multiple interacting elements that influence its outcome. Therefore, measuring solely health outcomes is not sufficient: the whole process of the implementation and use of such programmes should be evaluated. In order to evaluate the impact of an intervention with a Herd Health and Production Management (HHPM) programme a process evaluation framework was designed and used. The intervention involved 20 organic dairy cattle farmers and their advisors, in both France and Sweden. In both countries 20 organic dairy farms were selected as control herds. The evaluation of the HHPM programme was based on: (a) the compliance to the programme; (b) the programme’s functions influencing herd health management practices and stimulating dialogue between farmers and advisors; (c) its effectiveness in terms of improving herd health compared with control farms. Complete compliance to the programme was fulfilled by 21 out of 40 farmers–advisors. Results from a questionnaire showed that the programme functioned as intended (e.g. by allowing early identification of herd health problems), stimulated change in farmers’ herd health management practices and farmer–advisor dialogue. Even though the majority of the users perceived that the programme contributed to herd health improvements, no significant differences in health outcomes were found when compared with control farms 12 months after the start of the intervention. The programme allowed creating an environment promoting the exchange of information between farmers and advisors, necessary to define pertinent advice in a farm-specific situation. Future research should aim at improving methods for the evaluation of the effect of advisory programmes, by identifying early indicators for effective advice and developing methods to evaluate the quality of advisory situations without interfering with them.

The paramyxean parasite Marteilia refringens infects several bivalve species including European flat oysters Ostrea edulis and Mediterranean mussels Mytilus galloprovincialis. Sequence polymorphism allowed definition of three parasite types ‘M’, ‘O’ and ‘C’ preferably detected in oysters, mussels and cockles respectively. Transmission of the infection from infected bivalves to copepods Paracartia grani could be experimentally achieved but assays from copepods to bivalves failed. In order to contribute to the elucidation of the M. refringens life cycle, the dynamics of the infection was investigated in O. edulis, M. galloprovincialis and zooplankton over one year in Diana lagoon, Corsica (France). Flat oysters appeared non-infected while mussels were infected part of the year, showing highest prevalence in summertime. The parasite was detected by PCR in zooplankton particularly after the peak of prevalence in mussels. Several zooplanktonic groups including copepods, Cladocera, Appendicularia, Chaetognatha and Polychaeta appeared PCR positive. However, only the copepod species Paracartia latisetosa showed positive signal by in situ hybridization. Small parasite cells were observed in gonadal tissues of female copepods demonstrating for the first time that a copepod species other than P. grani can be infected with M. refringens. Molecular characterization of the parasite infecting mussels and zooplankton allowed the distinguishing of three Marteilia types in the lagoon.

The reliability of reverse transcription quantitative real-time PCR (RT-qPCR) depends on normalising the mRNA abundance using carefully selected, stable reference genes. Our aim was to propose sets of reference genes for normalisation in bovine or caprine adipose tissue (AT), mammary gland, liver and muscle. All of these tissues contribute to nutrient partitioning and metabolism and, thus, to the profitability of ruminant productions (i.e. carcasses, meat and milk). In this study, eight commonly used reference genes that belong to different functional classes (CLN3, EIF3K, MRPL39, PPIA, RPLP0, TBP, TOP2B and UXT) were analysed using the geNorm procedure to determine the most stable reference genes in bovine and/or caprine tissues. Abundances and rankings of reference genes varied between tissues, species and the combination of tissues and/or species. Therefore, we proposed 29 sets of reference genes that differed depending on the tissue and/or species. As examples of the 29 sets, EIF3K, TOP2B and UXT were proposed as the most stable reference genes in bovine AT; UXT, EIF3K and RPLP0 were the most stable reference genes in bovine and caprine AT. The optimal number of reference genes for data normalisation was 3 for 27 of the proposed 29 sets. In two of the 29 sets, four to five reference genes were necessary for data normalisation when the number of studied tissues was increased. For example, UXT, EIF3K, TBP, TOP2B and CLN3 were required for data normalisation in bovine mammary gland, AT, muscle and liver. We have evaluated some of our proposed sets of reference genes for the normalisation of CD36 gene expression. Normalisation using the three most stable reference genes has revealed downregulation of CD36 gene expression in bovine mammary gland by a concentrate-based diet that is supplemented with sunflower oil and upregulation of CD36 gene expression in caprine liver by including a rapidly degradable starch in the diet. The dietary regulation of the gene expression of CD36 has been erased by normalisation with the least stable reference genes, which may result in misinterpretation of CD36 gene regulation. To conclude, our results provide valuable reference gene sets for other studies that aim to measure tissue and/or species-specific mRNA abundance in ruminants.

In order to better understand the dynamics of acute leukemia, and in particular to findtheoretical conditions for the efficient delivery of drugs in acute myeloblastic leukemia,we investigate stability of a system modeling its cell dynamics.

The overall system is a cascade connection of sub-systems consisting of distributeddelays and static nonlinear feedbacks. Earlier results on local asymptotic stability areimproved by the analysis of the linearized system around the positive equilibrium. For thenonlinear system, we derive stability conditions by using Popov, circle and nonlinearsmall gain criteria. The results are illustrated with numerical examples andsimulations.

This study reports the metabolic and morphological characteristics of bovine intermuscular adipose tissue (AT) throughout foetal growth. Our hypothesis was that the histological and molecular features of intermuscular AT would be different from those previously reported for foetal perirenal AT, based on its anatomical location near the muscle and the recent identification of two distinct adipocyte precursors in mouse AT depending on their locations. To address this question, intermuscular AT was sampled from Charolais and Blond d'Aquitaine foetuses at 180, 210 and 260 days post conception (dpc). The two bovine breeds were chosen because of the higher adiposity of Charolais than Blond d'Aquitaine cattle during the postnatal life. Regardless of the breed, adipocyte volume increased slightly (+38%, P < 0.01) with increasing foetal age. This was concomitant with a decrease (P < 0.05) in the activity of enzymes involved in de novo fatty acid (FA) synthesis (FA synthase and glucose-6-phosphate dehydrogenase) and FA esterification (glycerol-3-phosphate dehydrogenase) when expressed per million adipocytes, and with an increase (P ⩽ 0.01) in mRNA abundances for uncoupling protein 1, adiponectin and leptin (LEP) between 180 and 260 dpc. No difference was observed in the adipocyte volume between breeds, which was consistent with the lack of major between-breed differences in mRNA abundances or activities of enzymes involved in lipid metabolism. The mRNA abundance of lipoprotein lipase was maintained across ages, suggesting a storage of circulating FA rather than of FA synthesized de novo. Plasma LEP increased with foetal age, but only in the Charolais breed (+71%, P ⩽ 0.01), and was two- to threefold higher in Charolais than Blond d'Aquitaine foetuses. Regardless of the breed, bovine intermuscular AT contained predominantly unilocular adipocytes believed to be white adipocytes that were larger at 260 dpc than at 180 dpc. These data thus challenge current concepts of the largely brown nature of bovine foetal AT (based on histological and metabolic features of perirenal AT as previously reported a few days before or after birth).

The potential benefits on human health have prompted an interest in developing nutritional strategies for reducing saturated and increasing specific unsaturated fatty acids (FA) in ruminant milk. The impact of the level and type of starchy concentrate added to diets supplemented with sunflower-seed oil on caprine milk FA composition and on mammary, omental and perirenal adipose, and liver lipid metabolism was examined in fourteen Alpine goats in a replicated 3 × 3 Latin square with 21 d experimental periods. Treatments were a grass hay-based diet with a high level of forage (F) or a high level of concentrate with either maize grain (CM) or flattened wheat (CW) as source of starch and supplemented with 130 g/d sunflower-seed oil. Milk yield was enhanced (P < 0·01) and milk fat content was decreased on the CM and CW diets compared with the F diet, resulting in similar milk fat secretion. Both high-concentrate diets increased (P < 0·05) milk yield of 10 : 0-16 : 0 and decreased trans-9,11-18 : 1 and cis-9, trans-11-18 : 2. The CW diet decreased (P < 0·05) the output of Σ C18 and Σ cis-18 : 1 and increased (P < 0·05) the output of trans-10-18 : 1 in milk. The expression and/or activity of fourteen proteins involved in the major lipogenic pathways in mammary tissues and of lipogenic genes in adipose and liver tissues were similar among treatments. In conclusion, high starch concentrates alter milk FA yield via mechanisms independent of changes in mammary, liver or adipose tissue lipogenic gene expression. Furthermore, data provided indications that mammary lipogenic responses to starch-rich diets differ between caprine and bovine ruminants.

For microorganisms, the preferred living state is adhering to surfaces that can lead tothe development of a biofilm. In drinking water networks, a biofilm can affect theorganoleptic quality of the water as well as whether it is safe to drink. This is due tothe probable presence of pathogens inside the biofilm which may be spread in the water. Tokeep the water quality safe, sanitization processes are regularly carried out usingoxidizing biocides which can alter the physico-chemical properties of the material. Due totheir surface physico-chemical properties and their high corrosion resistance, stainlesssteels seem to be good candidates for the making of drinking water systems. In this 2 yearstudy, stainless steel grades were compared with materials commonly used, in respect offouling, biofilm development and composition. The tested stainless steels include ferritic(444/EN 1.4521), three austenitic (304L/EN 1.4307, 316L/EN 1.4404, and 316LN/EN 1.4429)and two duplex (2304 /EN 1.4362, and 2205/EN 1.4462) grades. The experiments wereperformed in a pilot specially designed to assess the material biocontamination on anatural drinking water loop for more than 2 years. The results confirmed the significantimpact of the material on the biofilm development in terms of formation kinetic andecology. No differences were observed between stainless steel grades whereas theydisplayed an intermediate behaviour compared to other materials. Corrosion attacks wereonly observed on galvanised carbon steel while on stainless steels, negligible releaserates, much below international health requirements were measured. So stainless steelsoffer a good compromise to make drinking water pipes.

Three different stages of pig antral follicles have been studied in a granulosa-cell transcriptome analysis on nylon microarrays (1152 clones). The data have been generated from seven RNA follicle pools and several technical replicates were made. The objective of this paper was to state the feasibility of a transcriptomic protocol for the study of folliculogenesis in the pig. A statistical analysis was chosen, relying on the linear mixed model (LMM) paradigm. Low variability within technical replicates was hence checked with a LMM. Relevant genes that might be involved in the studied process were then selected. For the most significant genes, statistical methods such as principal component analysis and unsupervised hierarchical clustering were applied to assess their relevance, and a random forest analysis proved their predictive value. The selection of genes was consistent with previous studies and also allowed the identification of new genes whose role in pig folliculogenesis will be further investigated.

Although Babesia divergens is the the principal confirmed zoonotic Babesia sp. in Europe, there are gaps in our knowledge of its biology and transmission by the tick Ixodes ricinus. In order to reproduce the part of the parasite cycle that occurs in the vector, an in vitro animal skin feeding technique on blood containing in vitro cultivated B. divergens was developed. Parasite DNA was detected in all samples of salivary glands of nymphs and adults that had fed on parasitized blood as larvae and nymphs, respectively, indicating acquisition as well as a transtadial persistence of B. divergens. PCR performed on eggs and larvae produced by females that had fed on parasitized blood demonstrated the existence of a transovarial transmission of the parasite. Gorging B. divergens infected larvae on non-infected gerbils showed persistance of the parasite over moulting into the resulting nymphs. These results indicate that the parasitic stages infective for the vector (i.e. the sexual stages) can be produced in vitro. To our knowledge, this is the first report of artificial feeding of I. ricinus via membrane as well as in vitro transmission of B. divergens to its vector. The opportunities offered by the use of such a transmission model of a pathogen by I. ricinus are discussed.

This work presents an original way for preparing TiO-based coatings by thermal spraying. As titanium monoxide is oxidized by the mere trace of oxygen contained in hydrogen, it is obvious that plasma spraying of TiO powder does not lead easily to the formation of a titanium monoxide coating. However, thermodynamical calculations show that the conditions necessary for the preparation of TiO can be reached, at the titanium melting temperature (Tm=1933 K), when oxygen reacts with liquid metal in the presence of excess carbon. These results have led to experiments in which TiO-based coatings have been prepared by spraying a stoichiometric mixture of graphite and titanium grains onto cast iron in air. In optimal conditions, a gas-tight hard coating (1000 ± 15 HV3) of a TiO-based phase (composition: TiO0.81±0.06C0.04±0.02) has been obtained.