Camellia nitidissima Chi (CNC), a species of golden Camellia, is well known as “the queen of camellias.” It is an ornamental, medicinal, and edible plant grown in China. In this study, we conducted a genome survey sequencing analysis and simple sequence repeat (SSR) identification of CNC using the Illumina sequencing platform. The 21-mer analysis predicted its genome size to be 2,778.82 Mb, with heterozygosity and repetition rates of 1.42% and 65.27%, respectively. The CNC genome sequences were assembled into 9,399,197 scaffolds, covering ∼2,910 Mb and an N50 of 869 base pair. Its genomic characteristics were found to be similar to those of Camellia oleifera. In addition, 1,940,616 SSRs were identified from the genome data, including mono-(61.85%), di-(28.71%), tri-(6.51%), tetra-(1.85%), penta-(0.57%), and hexanucleotide motifs (0.51%). We believe these data will provide a useful foundation for the development of novel molecular markers for CNC as well as for further whole-genome sequencing of CNC.

A single-shot measurement of electron emittance was experimentally accomplished using a focused transfer line with a dipole. The betatron phase of electrons based on laser wakefield acceleration (LWFA) is energy dependent owing to the coupling of the longitudinal acceleration field and the transverse focusing (defocusing) field in the bubble. The phase space presents slice information after phase compensation relative to the center energy. Fitting the transverse size of the electron beam at different energy slices in the energy spectrum measured 0.27 mm mrad in the experiment. The diagnosis of slice emittance facilitates local electron quality manipulation, which is important for the development of LWFA-based free electron lasers. The quasi-3D particle-in-cell simulations matched the experimental results and analysis well.

We report dispersion management based on a mismatched-grating compressor for a 100 PW level laser, which utilizes optical parametric chirped pulse amplification and also features large chirped pulse duration and an ultra-broadband spectrum. The numerical calculation indicates that amplified pulses with 4 ns chirped pulse duration and 210 nm spectral bandwidth can be directly compressed to sub-13 fs, which is close to the Fourier-transform limit (FTL). More importantly, the tolerances of the mismatched-grating compressor to the misalignment of the stretcher, the error of the desired grating groove density and the variation of material dispersion are comprehensively analyzed, which is crucially important for its practical application. The results demonstrate that good tolerances and near-FTL compressed pulses can be achieved simultaneously, just by keeping a balance between the residual second-, third- and fourth-order dispersions in the laser system. This work can offer a meaningful guideline for the design and construction of 100 PW level lasers.

The wheat aphid Sitobion miscanthi (CWA) is an important harmful pest in wheat fields. Insecticide application is the main method to effectively control wheat aphids. However, CWA has developed resistance to some insecticides due to its extensive application, and understanding resistance mechanisms is crucial for the management of CWA. In our study, a new P450 gene, CYP4CJ6, was identified from CWA and showed a positive response to imidacloprid and thiamethoxam. Transcription of CYP4CJ6 was significantly induced by both imidacloprid and thiamethoxam, and overexpression of CYP4CJ6 in the imidacloprid-resistant strain was also observed. The sensitivity of CWA to these two insecticides was increased after the knockdown of CYP4CJ6. These results indicated that CYP4CJ6 could be associated with CWA resistance to imidacloprid and thiamethoxam. Subsequently, the posttranscriptional regulatory mechanism was assessed, and miR-316 was confirmed to participate in the posttranscriptional regulation of CYP4CJ6. These results are crucial for clarifying the roles of P450 in the resistance of CWA to insecticides.

Stimulated Raman-scattering-based lasers provide an effective way to achieve wavelength conversion. However, thermally induced beam degradation is a notorious obstacle to power scaling and it also limits the applicable range where high output beam quality is needed. Considerable research efforts have been devoted to developing Raman materials, with diamond being a promising candidate to acquire wavelength-versatile, high-power, and high-quality output beam owing to its excellent thermal properties, high Raman gain coefficient, and wide transmission range. The diamond Raman resonator is usually designed as an external-cavity pumped structure, which can easily eliminate the negative thermal effects of intracavity laser crystals. Diamond Raman converters also provide an approach to improve the beam quality owing to the Raman cleanup effect. This review outlines the research status of diamond Raman lasers, including beam quality optimization, Raman conversion, thermal effects, and prospects for future development directions.

Barnyardgrass [Echinochloa crus-galli (L.) P. Beauv.] is a problematic weed in rice (Oryza sativa L.) fields. Overapplication of herbicides causes environmental pollution and the emergence of resistant weeds, and integrated weed management methods can reduce dependence on herbicides. The growth of E. crus-galli and rice seedlings was shown to be significantly inhibited by high concentrations of fulvic acid (FA, C14H12O8) under flooding conditions (HF, 0.80 g L−1) (P < 0.05). In contrast, seedling growth was promoted by the application of very low concentrations of FA (LF, 0.02 g L−1). The activities of glutathione S-transferase (GST) and antioxidant enzymes, including total superoxide dismutase (T-SOD), peroxidase (POD), and catalase (CAT), in E. crus-galli seedlings were enhanced by the LF treatment; while POD activity decreased and GST, T-SOD, and CAT activity was not significantly altered by the HF treatment. The metabolomic and transcriptomic analyses showed that FA regulated E. crus-galli seedling growth by affecting the synthesis of indole derivatives and flavonoid compounds. Compared with the blank control (CK, 0 g L−1), the levels of four indole derivatives were upregulated under the HF treatment, and the indole derivatives were slightly downregulated under the LF treatment. The flavonoids, including naringenin, naringenin chalcone, eriodictyol, kaempferol, and epigallocatechin, were downregulated under HF treatment, and the growth of E. crus-galli was reduced. In contrast, the metabolism and transcription of flavonoids were not significantly altered by the LF treatment. The addition of 0.80 g L−1 FA obviously inhibited the growth of newly sprouted E. crus-galli, whereas rice growth was significantly promoted 8 d after rice planting (P < 0.05). The application of FA, therefore, might be a potential integrated weed management method to control the damage caused by E. crus-galli in paddy fields.

The hygiene hypothesis posits that the decreased incidence of parasitic infection in developed countries may underlie an increased prevalence of allergic and autoimmune diseases in these countries. As unique inflammation modulator of intracellular parasitism, Trichinella spiralis, or its excretory–secretory (ES) product, shows improved responses to allergies, autoimmune diseases, inflammatory bowel disease, type 1 diabetes, rheumatic arthritis and autoimmune encephalomyelitis by exerting immunomodulatory effects on both innate and adaptive immune cells in animal models. Research has shown that T. spiralis differs from other helminths in manipulation of the host immune response not only by well-known characteristics of its life cycle, but also by its inflammation modulation pathway. How the parasite achieves inflammation modulation has not been fully elucidated yet. This review will generalize the mechanism and focuses on ES immunomodulatory molecules of T. spiralis that may be important for developing new therapeutics for inflammatory disorders.

This paper deals with motion planning and control problems for a class of partially differentially flat systems. They possess a feature that the derivative of the fiber variable can be represented purely by the base variable and its derivatives. Based on this feature, a Beta function-based motion planning algorithm is proposed with less computational cost compared with the optimal control formulation while providing similar system performance. Then, an adaptive controller is constructed through a function approximation technique-based approach. Finally, the feasibility of the proposed motion planning and control algorithms is verified by simulations.

Employing atomic-scale simulations, the response of a high-angle grain boundary (GB), the soft/hard GB, against external loading was systematically investigated. Under tensile loading close to the hard orientation, strain-induced dynamic recrystallization was observed to initiate through direct soft-to-hard grain reorientation, which was triggered by stress mismatch, inhibited by surface tension from the soft-hard GB, and proceeded by interface ledges. Such grain reorientation corresponds with expansion and contraction of the hard grain along and perpendicular to the loading direction, respectively, accompanied by local atomic shuffling, providing relatively large normal strain of 8.3% with activation energy of 0.04 eV per atom. Tensile strain and residual dislocations on the hard/soft GB facilitate the initiation of dynamic recrystallization by lowering the energy barrier and the critical stress for grain reorientation, respectively.

A new simple mathematical method has been proposed to predict rock stress around a noncircular tunnel and the method is calibrated and validated with a numerical model. It can be found that the tunnel shapes and polar angles affect the applicable zone of the theoretical model significantly and the applicable zone of a rectangular tunnel was obtained using this method. The method can be used to predict the values of the concentrated stress, and to analyze the change rate of rock stress and back to calculate the mechanical boundary condition in the applicable zone. The results of the stress change rate indicate that the horizontal stress is negatively related to the vertical boundary load and positively related to the horizontal boundary load. The vertical stress is negatively related to the horizontal boundary load and positively related to the vertical boundary load. These findings can be used to explain the evolution of the vertical increment in stress obtained with field-based borehole stress monitoring.

A “RE-free” and I-phase-containing Mg–8Sn-based alloy system was developed and successfully fabricated through the equal channel angular pressing (ECAP) process. The influence of the Zn/Al mass ratio on the microstructures and mechanical properties of the as-ECAPed Mg–8Sn–(5,6,7)Zn–2(wt%)Al alloys was investigated using an optical microscope, an X-ray diffractometer, a scanning electron microscope, a transmission electron microscope, and a universal testing machine. Grain size, dynamic recrystallization behavior, and texture were found to be greatly affected by the Zn/Al mass ratio. Furthermore, the ultimate tensile strength (250 MPa) and elongation (14.5%) of the alloy with a Zn/Al mass ratio of 3 were considerably increased compared to those of the as-ECAPed alloys with Zn/Al ratios of 2.5 and 3.5 (ultimate tensile strength and elongation of 215 MPa and 13% and 184 MPa and 10%, respectively). This significant enhancement was attributed to extensive grain boundary strengthening, precipitation strengthening, and higher work hardening capacity as well as texture randomization. The strength and ductility of the as-ECAPed alloys are also discussed in terms of the I-phase and Mg2Sn formation.

Rhizoma et Radix Notopterygii is often used as a traditional medicine in China. In our recent work, we found that the ethanol crude extract of Rhizoma et Radix Notopterygii could reduce phytotoxicity of acetochlor on rice. The crude extract of Rhizoma et Radix Notopterygii was isolated and purified by activity-guided fractionation. Two coumarins, isopimpinellin and 5-methoxypsoralen (5-MOP) were identified, and their bioactivity was tested in a growth chamber. The results showed that the two coumarins increased herbicide tolerance of rice shoots, and 5-MOP demonstrated better protection than isopimpinellin. The treatment of 5-MOP at 50 g ai ha−1 recovered the shoot height of rice from 42.6% (treated with acetochlor only) to 81.6% of the control treated without acetochlor, whereas the phytocidal activity of acetochlor on barnyardgrass was not impaired by 5-MOP. Further study suggested that 5-MOP increases herbicide tolerance of rice by enhancing the glutathione S-transferase level of activity in rice. Our findings suggest that isopimpinellin and 5-MOP have the potential to be applied as safeners for rice.