Due to the environmental problems derived from the use of common surfactants as modifiers for clay mineral adsorbents to mitigate mycotoxin contamination of animal feeds, finding non-toxic modifiers to prepare safe and efficient adsorbents is necessary. The objective of the present study was, therefore, to modify acidified palygorskite with polyhexamethylene biguanide (PHMB) to obtain antibacterial polyhexamethylene biguanide/palygorskite (PHMB/Plg) composites for the removal of zearalenone, a common mycotoxin. The PHMB/Plg composites were characterized and analyzed by X-ray diffraction, Fourier-transform infrared spectroscopy, field-emission scanning electron microscopy, and isothermal nitrogen adsorption analysis. The adsorption properties of the composites with respect to zearalenone and their antibacterial activity with respect to Escherichia coli and Staphylococcus aureus were studied. The results indicated that the hydrophobicity of palygorskite was enhanced after modification with PHMB, which could effectively improve the adsorption property of palygorskite toward the nonpolar zearalenone molecules. The adsorption capacity of PHMB/Plg increased with increasing amounts of polyhexamethylene biguanide and increasing pH. The adsorption data were described well by pseudo-second order kinetics and by the Langmuir adsorption model. The maximum adsorption capacity was 2777 μg/g. When the amount of PHMB added increased to 15 wt.%, the composites obtained exhibited good antibacterial performance, and the minimum inhibitory concentrations for Escherichia coli and Staphylococcus aureus were both at 2.5 mg/mL.

There are many deviation sources in the assembly process of aircraft complex thin-walled structures. To get important factors that affect quality, it is crucial to diagnose the key deviation resources. The deviation transfer between deviation sources and assembly parts has the characteristics of small sample size, nonlinearity, and strong coupling, so it is difficult to diagnose the key deviation sources by constructing assembly dimension chains. Therefore, based on the deviation detection data, transfer entropy and complex network theory are introduced. Integrating the depth-first traversal algorithm with degree centrality theory, a key deviation diagnosis method for complex thin-walled structures is proposed based on weighted transfer entropy and complex networks. The application shows that key deviation sources that affect assembly quality can be accurately identified by the key deviation source diagnosis method based on complex networks and weighted transfer entropy.

The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration (LDPA) and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources. The successful use of the SG-II Peta-watt (SG-II PW) laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility. Recently, the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source, laser contrast and terminal focus. LDPA experiments were performed using the maintained SG-II PW laser beam, and the highest cutoff energy of the proton beam was obviously increased. Accordingly, a double-film target structure was used, and the maximum cutoff energy of the proton beam was up to 70 MeV. These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.

In the present study, we investigated the influence of different mid-stage N compensation timings on agronomic and physiological traits associated with grain yield and quality in field experiments. Two japonica rice cultivars with a good tasting quality (Nangeng 9108 and Nangeng 5055) were examined under eight N compensation timings (N1–N6: one-time N compensation at 7-2 weeks before heading; N7: split N compensation at 5 and 3 weeks before heading; N8: split N compensation at 4 and 2 weeks before heading) and a control with no N compensation. The highest yield was obtained with N7, followed by N3. The yield advantage is mainly attributable to the improved population structure (higher productive tiller rate with a stable number of effective panicles), higher total number of spikelets per unit area (large panicles with more grains per panicle), larger leaf area index in the late period and higher photosynthetic production capacity (more dry matter accumulation and transportation in the middle and late periods). Delaying N compensation timing improved the processing and nutritional quality of rice, but decreased the quality of appearance and cooking/eating traits. Our results suggest that, from the perspective of achieving relative coordination between high yield and high quality of japonica rice, the optimal N compensation should be divided equally at 5 and 3 weeks before heading. However, if simplifying the number of operations and the pursuit of eating quality were considered, one-time N compensation should be conducted at 5 weeks before heading.

Gravitational waves from coalescing neutron stars encode information about nuclear matter at extreme densities, inaccessible by laboratory experiments. The late inspiral is influenced by the presence of tides, which depend on the neutron star equation of state. Neutron star mergers are expected to often produce rapidly rotating remnant neutron stars that emit gravitational waves. These will provide clues to the extremely hot post-merger environment. This signature of nuclear matter in gravitational waves contains most information in the 2–4 kHz frequency band, which is outside of the most sensitive band of current detectors. We present the design concept and science case for a Neutron Star Extreme Matter Observatory (NEMO): a gravitational-wave interferometer optimised to study nuclear physics with merging neutron stars. The concept uses high-circulating laser power, quantum squeezing, and a detector topology specifically designed to achieve the high-frequency sensitivity necessary to probe nuclear matter using gravitational waves. Above 1 kHz, the proposed strain sensitivity is comparable to full third-generation detectors at a fraction of the cost. Such sensitivity changes expected event rates for detection of post-merger remnants from approximately one per few decades with two A+ detectors to a few per year and potentially allow for the first gravitational-wave observations of supernovae, isolated neutron stars, and other exotica.

A disruption database characterizing the current quench of disruptions with ITER-like tungsten divertor has been developed on EAST. It provides a large number of plasma parameters describing the predisruptive plasma, current quench time, eddy current, and mitigation by massive impurity injection, which shows that the current quench time strongly depends on magnetic energy and post-disruption electron temperature. Further, the energy balance and magnetic energy dissipation during the current quench phase has been well analysed. Magnetic energy is also demonstrated to be dissipated mainly by ohmic reheating and inductive coupling, and both of the two channels have great effects on current quench time. Also, massive gas injection is an efficient method to speed up the current quench and increase the fraction of impurity radiation.

The SPARC tokamak is a critical next step towards commercial fusion energy. SPARC is designed as a high-field ($B_0 = 12.2$ T), compact ($R_0 = 1.85$ m, $a = 0.57$ m), superconducting, D-T tokamak with the goal of producing fusion gain $Q>2$ from a magnetically confined fusion plasma for the first time. Currently under design, SPARC will continue the high-field path of the Alcator series of tokamaks, utilizing new magnets based on rare earth barium copper oxide high-temperature superconductors to achieve high performance in a compact device. The goal of $Q>2$ is achievable with conservative physics assumptions ($H_{98,y2} = 0.7$) and, with the nominal assumption of $H_{98,y2} = 1$, SPARC is projected to attain $Q \approx 11$ and $P_{\textrm {fusion}} \approx 140$ MW. SPARC will therefore constitute a unique platform for burning plasma physics research with high density ($\langle n_{e} \rangle \approx 3 \times 10^{20}\ \textrm {m}^{-3}$), high temperature ($\langle T_e \rangle \approx 7$ keV) and high power density ($P_{\textrm {fusion}}/V_{\textrm {plasma}} \approx 7\ \textrm {MW}\,\textrm {m}^{-3}$) relevant to fusion power plants. SPARC's place in the path to commercial fusion energy, its parameters and the current status of SPARC design work are presented. This work also describes the basis for global performance projections and summarizes some of the physics analysis that is presented in greater detail in the companion articles of this collection.

In this paper, the generation of relativistic electron mirrors (REM) and the reflection of an ultra-short laser off the mirrors are discussed, applying two-dimension particle-in-cell simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapid expansion. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads to the resonance between laser and REM. The reflected radiation near this interval and corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, a certain part of the reflected field could be selectively amplified or depressed, leading to the selective adjustment of the corresponding spectra.

Flexibility is one of the important mechanical performance parameters of stent. The flexibility of tapered stents, especially self-expanding tapered stents, remains unknown. In this study, we developed a new selfexpanding tapered stent for tapered arteries and performed a numerical investigation of stent flexibility by using finite element method. The effect of stent design parameters, including taper and link space width, on stent flexibility was studied. The flexibility of the proposed stent was also compared with that of traditional cylindrical stents. Results show that the tapered stent is more flexible than the traditional cylindrical stent. Furthermore, the flexibility of the tapered stent increases with increasing stent taper and stent link space width. The increase in the stent link space width can contribute to the reduction in the peak stress. Therefore, tapered stents with high link space width will improve the stent flexibility. This work provides useful information for improvement of stent design and clinical selection.

Some studies have shown that the excessive metabolic heat production is the primary cause for dead chicken embryos during late embryonic development. Increasing heat shock protein (HSP) expression and adjusting metabolism are important ways to maintain body homeostasis under heat stress. This study was conducted to investigate the effects of in ovo injection (IOI) of vitamin C (VC) at embryonic age 11th day (E11) on HSP and metabolic genes expression. A total of 320 breeder eggs were randomly divided into normal saline and VC injection groups. We detected plasma VC content and rectal temperature at chick’s age 1st day, and the mRNA levels of HSP and metabolic genes in embryonic livers at E14, 16 and 18, analysed the promoter methylation levels of differentially expressed genes and predicted transcription factors at the promoter regions. The results showed that IOI of VC significantly increased plasma VC content and decreased rectal temperature (P < 0.05). In ovo injection of VC significantly increased heat shock protein 60 (HSP60) and pyruvate dehydrogenase kinase 4 (PDK4) genes expression at E16 and PDK4 and secreted frizzled related protein 1 (SFRP1) at E18 (P < 0.05). At E16, IOI of VC significantly decreased the methylation levels of total CpG sites and −336 CpG site in HSP60 promoter and −1137 CpG site in PDK4 promoter (P < 0.05). Potential binding sites for nuclear factor-1 were found around −389 and −336 CpG sites in HSP60 promoter and potential binding site for specificity protein 1 was found around −1137 CpG site in PDK4 promoter. Our results suggested that IOI of VC increased HSP60, PDK4 and SFRP1 genes expression at E16 and 18, which may be associated with the demethylation in gene promoters. Whether IOI of VC could improve hatchability needs to be further verified by setting uninjection group.

A multichannel calorimeter system is designed and constructed which is capable of delivering single-shot and broad-band spectral measurement of terahertz (THz) radiation generated in intense laser–plasma interactions. The generation mechanism of backward THz radiation (BTR) is studied by using the multichannel calorimeter system in an intense picosecond laser–solid interaction experiment. The dependence of the BTR energy and spectrum on laser energy, target thickness and pre-plasma scale length is obtained. These results indicate that coherent transition radiation is responsible for the low-frequency component (${<}$1 THz) of BTR. It is also observed that a large-scale pre-plasma primarily enhances the high-frequency component (${>}$3 THz) of BTR.

Vessel flexure can be triggered naturally by surgical operation, heart pulsation and body movement. It may affect the mechanical behavior of the stent and the existence of a stent may in turn cause vessel injury. In the present study, the finite element method is employed to study the interaction between stent and vessel during vessel flexure. Two- and four-link stents made of stainless steel 316L and magnesium alloy WE43 are considered. Results indicate that longitudinal deformation of the stent can be caused by vessel flexure, and the higher levels of stress exist in the link struts. The existence of the stent could induce significant stress concentration and straightened deformation on vessel wall in the course of vessel flexure. Stents with more links or made of harder materials show greater anti-deformation capability, thus inducing a more severe stress concentration and straightened deformation on the vessel wall. The bending direction also affects the mechanical performance of the vessel-stent system. The results obtained could provide useful information for better stent designs and clinical decisions.

Mechanisms responsible for excellent marbling in Japanese black cattle, Wagyu, remain to be established. Because both muscle cells and intramuscular adipocytes are developed from mesenchymal progenitor cells during early muscle development, we hypothesized that intramuscular progenitor cells in Wagyu cattle have attenuated myogenic capacity in favor of adipogenesis, leading to high marbling but reduced muscle growth. Biceps femoris muscle biopsy samples were obtained from both Angus (n=3) and Wagyu (n=3) cattle at 12 months of age. Compared with Angus, the density of satellite cells was much lower in Wagyu muscle (by 45.8±10%, P<0.05). Consistently, the formation of myotubes from muscle-derived progenitor cells was also lower (by 64.2±12.9%, P<0.05), but adipogenic capacity was greater in Wagyu. The average muscle fiber diameter was larger in Wagyu (by 23.9±6.8%, P=0.089) despite less muscle mass, suggesting less muscle fiber formation in Wagyu compared with Angus cattle. Because satellite cells are derived from fetal myogenic cells, the reduction in satellite cell density together with lower muscle fiber formation suggests that myogenesis was attenuated during early muscle development in Wagyu cattle. Given the shared pool of mesenchymal progenitor cells, the attenuated myogenesis likely shifts progenitor cells to adipogenesis during early development, which may contribute to high intramuscular adipocyte formation in Wagyu cattle.

Diarrhea is a common cause of morbidity and mortality and the incidence of diarrhea in the world has changed little over the past four decades. To assess the prevalence of and healthcare practices for diarrhea, a cross-sectional study was conducted in Pudong, Shanghai, China. In October 2014, a total of 5324 community residents were interviewed. Respondents were asked if they had experienced diarrhea (defined as ⩾3 passages of watery, loose, bloody, or mucoid stools within a 24-h period) in the previous month prior to the interview. The monthly prevalence of diarrhea was 4·1% (95% CI: 3·3–4·8), corresponding to an incidence rate of 0·54 episodes per person-year. The proportion of individuals with diarrhea who sought healthcare was 21·2% (95% CI: 13·4–29·0). Diarrhea continues to impose a considerable burden on the community and healthcare system in Pudong. Young age and travel were identified as predictors of increased diarrhea occurrence.

The E2F transcription factor family is distributed widely in eukaryotes and has been well studied among mammals. In the present study, the E2F transcription factor 4 (E2F4) gene was isolated from fat bodies of Antheraea pernyi and sequenced. E2F4 comprised a 795 bp open reading frame encoding a deduced amino acid sequence of 264 amino acid residues. The recombinant protein was expressed in Escherichia coli (Transetta DE3), and anti-E2F4 antibodies were prepared. The deduced amino acid sequence displayed significant homology to an E2F4-like protein from Bombyx mori L. Quantitative real-time polymerase chain reaction analysis revealed that E2F4 expression was highest in the integument, followed by the fat body, silk glands, and haemocytes. The expression of E2F4 was upregulated in larvae challenged by bacterial (Escherichia coli, Micrococcus luteus), viral (nuclear polyhedrosis virus), and fungal (Beauveria bassiana) pathogens. These observations indicated that E2F4 is an inducible protein in the immune response of A. pernyi and probably in other insects.

This study characterized Neisseria meningitidis serogroup C strains in China in order to establish their genetic relatedness and describe the use of multilocus variable-number tandem-repeat (VNTR) analysis (MLVA) to provide useful epidemiological information. A total of 215 N. meningitidis serogroup C strains, obtained from 2003 to 2012 in China, were characterized by MLVA with different published schemes as well as multilocus sequence typing. (i) Based on the MLVA scheme with a combination of five highly variable loci, 203 genotypes were identified; this level of discrimination supports its use for resolving closely related isolates. (ii) Based on a combination of ten low variable loci, clear phylogenetic relationships were established within sequence type complexes. In addition, there was evidence of microevolution of VNTR loci over the decade as strain lineages spread from Anhui to other provinces, the more distant the provinces from Anhui, the higher the genetic variation.

A calculation model is put forward to analyze the interfacial response of an elastic frictionless punch, pressed normally into a half-plane, and subject to bending moment throughout this paper to observe the important effect that different normal loads and bending moments on the contact pressure distribution and contact deformation. Results for the detailed considerations have been given to the specific different cases of ηc. A characteristic response of the punch to a surplus bending moment has been found. The small differences can be observed between both methods show characteristic features of the FEM model and the theoretical model. The presented numerical results illustrate the influences of the normal load and bending moment on the contact stresses. The results obtained can be used to analyze the crack nucleation in fretting when the punch is acted upon by the normal force and the bending moment.

Gattini and CSTAR have been installed at Dome A, Antarctica, which provide time-series photometric data for a large number of pulsating variable stars. We present the study for several variable stars with the data collected with the two facilities in 2009 to demonstrate the scientific potential of observations from Dome A for asteroseismology.