Bullslaughter Bay in southern Pembrokeshire, UK, exposes sections of Upper Mississippian limestone strata. In many places, the rock suffered an isovolumetric alteration during a period of sea-level oscillations. We used multiple approaches to study the weathered rocks, combining sedimentological, petrographic and isotopic compositions (δ18O and δ13C values). Two main microfacies are recognized: (i) packstones/grainstones, characteristic of an open marine shallow subtidal/intertidal environment, with a high degree of agitation, slightly elevated salinity and temporary subaerial exposure; and (ii) mudstones/wackestones in a lagoonal setting and intertidal or supratidal environments, with a pedogenetic influence. In both cases, a complex diagenetic story, which started early in a meteoric environment, induced a strong alteration producing loose sediments in place of the parent rock. Calcretization, at or near the sediment surface in the vadose zone, was one of the most widespread diagenetic modes. It could be associated with beachrocks. Carbon and oxygen stable isotope analyses from more or less weathered limestones support the petrographic data: they show non-marine values with δ13C ranges of from −2.13 ‰ to 1.75 ‰ and δ18O from −6.05 ‰ to −4.66 ‰. These values are systematically lower than those of the middle Carboniferous seawater. Some periods of low sea level and subaerial exposure allowed gypsum to form. Neoformation of euhedral quartz by probable replacement after sulfate, and halite pseudomorphs after gypsum in a hypersaline environment are documented for the first time in southern Pembrokeshire. The studied weathered limestones present a complex diagenetic evolution related to sea-level oscillations in a range of hot and contrasting seasonal climates.

The Campanian Beloe Ozero locality within the Rybushka Formation in Saratov Province, Russia, is one of the richest and most diverse Upper Cretaceous pterosaur localities in Europe. It produces identifiable remains of Pteranodontidae indet. and Azhdarchidae indet., as well as bones which can be attributed to either of these groups. The pteranodontid specimens from the Beloe Ozero locality described in this paper include a cervical III, distal scapula, humerus deltopectoral crest, proximal syncarpal, preaxial carpal and complete femur. Based on the femur and proximal syncarpal, the wingspan estimate for the Beloe Ozero pteranodontid varies from 5.2 to 6.5 m. Volgadraco bogolubovi, known from the neighbouring Shyrokii Karamysh locality of the same formation and attributed previously to the Azhdarchidae, is more likely pteranodontid than azhdarchid. The other putative records of the Pteranodontidae in the Late Cretaceous of North America, Europe and Asia are discussed. Pteranodontid pterosaurs had a much wider distribution on the northern continents in the Late Cretaceous than previously thought.

The Proterozoic Chotanagpur Granite Gneiss Complex (CGGC) at the northern boundary of the Central Indian Tectonic Zone (CITZ) of the eastern Indian shield preserves relics of fossilized oceanic back-arc crust. We describe the field, petrographical and geochemical characteristics of the mafic rocks comprising pillow basalts and dolerites from the Bathani area of the northern fringe of the CGGC, eastern India. The basalts consist of plagioclase feldspar, hornblende, opaque minerals (Fe–Ti oxide) and chlorite, and the dolerite consists of plagioclase, hornblende and opaque minerals. Our data indicate that the Bathani mafic rocks have tholeiitic to transitional composition and are overprinted by greenschist facies metamorphic conditions; however, REE and fluid immobile elements preserve their primary geochemical signatures. The (La/Sm)N ratios (1.38–2.15) and chondrite-normalized REE patterns point to an enriched mid-ocean ridge basalt (E-MORB) mantle source. Geochemical characteristics indicate a mixed signature of MORB and arc tholeiite with enrichment of Ba, Th, Eu and Sr, similar to that of back-arc supra-subduction zone ophiolites. These mafic rocks are the product of MORB-like magma derived from a depleted mantle corresponding to < 2% partial melting of spinel lherzolite, enriched by subduction-induced slab metasomatism and melting. The Bathani mafic rocks are representative of the upper part of a supra-subduction zone columnar ophiolite section, which was emplaced onto the present-day northern margin of the CGGC during suturing of the northern and southern Indian block at c. 1.9 Ga during the Nuna amalgamation.

Graptolites have been collected from sections through Lower Ordovician strata in northern Iran. At the Saluk Mountains, in the Kopet–Dagh region, mudrocks yielded fragmentary tubaria of Rhabdinopora sp. cf. R. flabelliformis, indicating the presence of lower Tremadocian strata there; stratigraphically, they lie between two limestone beds with the euconodont Cordylodus lindstromi. At Simeh–Kuh in the eastern Alborz Mountains (Semnan Province), upper Tremadocian – lower Floian strata include laminated dark mudstones that contain restricted graptolite faunas, mainly of small declined didymograptids; these are thought to represent incursions of plankton during periods of marine highstands. The lower major flooding surface in Simeh–Kuh coincides with an invasion of the graptolite biofacies and an incursion of Hunnegraptus? sp.; the second major flooding surface is associated with an incursion of Baltograptus geometricus. They were most probably synchronous with those in the lower part of the Hunnegraptus copiosus Biozone and at the base of the Cymatograptus protobalticus Biozone in the of the Tøyen Shale Formation succession of Västergötland, Scandinavia, suggesting that observed characters of sedimentation were eustatically controlled.

The Flowers River Igneous Suite of north-central Labrador comprises several discrete peralkaline granite ring intrusions and their coeval volcanic succession. The Flowers River Granite was emplaced into Mesoproterozoic-age anorthosite–mangerite–charnockite–granite (AMCG) -affinity rocks at the southernmost extent of the Nain Plutonic Suite coastal lineament batholith. New U–Pb zircon geochronology is presented to clarify the timing and relationships among the igneous associations exposed in the region. Fayalite-bearing AMCG granitoids in the region record ages of 1290 ± 3 Ma, whereas the Flowers River Granite yields an age of 1281 ± 3 Ma. Volcanism occurred in three discrete events, two of which coincided with emplacement of the AMCG and Flowers River suites, respectively. Shared geochemical affinities suggest that each generation of volcanic rocks was derived from its coeval intrusive suite. The third volcanic event occurred at 1271 ± 3 Ma, and its products bear a broad geochemical resemblance to the second phase of volcanism. The surrounding AMCG-affinity ferrodiorites and fayalite-bearing granitoids display moderately enriched major- and trace-element signatures relative to equivalent lithologies found elsewhere in the Nain Plutonic Suite. Trace-element compositions also support a relationship between the Flowers River Granite and its AMCG-affinity host rocks, most likely via delayed partial melting of residual parental material in the lower crust. Enrichment manifested only in the southernmost part of the Nain Plutonic Suite as a result of its relative proximity to multiple Palaeoproterozoic tectonic boundaries. Repeated exposure to subduction-derived metasomatic fluids created a persistent region of enrichment in the underlying lithospheric mantle that was tapped during later melt generation, producing multiple successive moderately to strongly enriched magmatic episodes.

The provenance and tectonic setting of the Lower–Middle Triassic clastic sediments from the Napo basin, South China, have been examined here using detrital modes, whole-rock geochemistry and detrital zircon U–Pb ages. Field investigations indicate that these sediments consist of fan delta, slope and turbidity fan facies with dominantly southward palaeocurrent directions. Detrital modes and geochemical characteristics of the clastic rocks indicate that they were derived from mixed magmatic arc and Palaeozoic successions in a continental island arc setting, with no significant sediment recycling. The U–Pb age spectra of sandstone detrital zircons from different stratigraphic positions are similar, with one major group (300–230 Ma), two subordinate groups (400–320 Ma and 480–420 Ma, respectively) and two scattered groups (1200–800 Ma and 2000–1700 Ma, respectively). Thus, we consider that the north late Permian – Middle Triassic volcanic rocks and the uplifted Palaeozoic sedimentary/volcanic sequences constituted the predominant sources. The detritus derived from the late Permian Emeishan mafic rocks is subordinate and limited. The pre-Devonian zircons are likely sedimentary-recycled or magmatic-captured instead of directly derived from the early Palaeozoic orogen (e.g. Yunkai massif) and Neoproterozoic Jiangnan orogen because of the topographic barrier of a magmatic arc and carbonate platform. Considering the spatial and temporal distribution characteristics of the volcanic arc and ophiolite, we suggest that the Triassic Napo basin was a fore-arc basin within a continental island arc setting, which developed in response to the northward subduction of the Babu–Cao Bang branch ocean beneath the South China Block.

We describe aggregative microconchid (Lophophorata) tubes from the uppermost Permian (upper Changhsingian) and Lower Triassic (Olenekian) lacustrine and fluvial strata of the Tunguska and Kuznetsk basins and the southern Cis-Urals, Russia. These attach to clam shrimp carapaces, bivalve shells, terrestrial plant fragments and a horseshoe crab head shield, and also form their own monospecific agglomerations. Planispiral tubes of a wide size range (0.1–2.5 mm) create dense settlements on these firm substrates, which likely comprise multiple generations of the same species. These finds confirm that this extinct lophophorate group was inhabiting non-marine continental basins during latest Permian and earliest Triassic time, when they were major suspension feeders in such limnic ecosystems. Microconchids dispersed extensively and rapidly in the aftermath of the Permian–Triassic mass extinction into both marine and continental basins at low and moderately high latitudes, which were notably different in salinity, temperature, depth and redox conditions. This confirms that small lightly calcified microconchids were a genuine disaster eurytopic group, whose expansion may have been promoted by low predator pressure and low competition for substrate.

Results are reported of what is believed to be the first survey of the quantitative contributions Earth scientists make to their research publications. Based on a return of 26 (from 45; 254 total documents), two key patterns are observed. For most articles, there is a steady decrease in the roles of the first through fifth authors. The former fall from 65 ± 14% for two-author outputs, to 52 ± 9% for five, to 46 ± 10% for ten; fifth authors are perceived as having contributed 5–6%. The term ‘balanced’ is used to describe such contributor lists. The second pattern, which is labelled ‘imbalanced’, is recognized with teams of five or more and involves the first author shouldering a disproportionately large amount of the work; consequently, the inputs of the third and lesser authors range from small to negligible (5–1%). In some cases, it is observed in a few of a researcher’s publications (≤3); in others, it is more pervasive. There are two basic explanations: estimation problems and excessive numbers of authors, which can be split into two and three subcategories, respectively. The key features of the survey data are dwelt upon. The work concludes with an exploration of a proposed H-Index-type metric that is weighted by the contribution fractions a researcher makes to their publications. This, I contend, would be more reflective of their impact.

Significant uncertainty remains regarding the exact timing and nature of subduction events during the closure of the Tethyan seas in what is now NW Iran. This study thus presents new geochemical compositions and U–Pb ages for a suite of volcanic rocks emplaced during Cenozoic volcanism in the west Alborz Magmatic Assemblage, which is commonly regarded as the back-arc of the Neotethyan magmatism in Central Iran. The subalkali basalts and andesites are dated to 57 ± 1.2 Ma, and are likely derived from a supra-subduction mantle wedge. Later, trachytic A-type rocks erupted from ∼42 to 25 Ma during an anorogenic (extensional) stage triggered by slab retreat and associated asthenospheric mantle influx. A-type melts were at least partly concurrent with lithospheric mantle magmatism implied by eruption of subalkali basalts–andesites around 26–24 Ma. Next, Amp-Bt trachybasaltic volcanism with high-Nb basaltic affinity at ∼19 Ma likely records slab deepening and slab partial melting, which reacted with the mantle wedge to produce the source material for the high-Nb basalts. Sr–Nd isotopic ratios for SE Ahar mafic as well as A-type rocks imply rather enriched mantle source(s). Some crustal contamination is implied by the presence of inherited zircons dominated by those derived from Neoproterozoic–Cambrian basement rocks and Carboniferous magmatism. Rhyolitic rocks with adakitic affinity probably mark the final volcanism in the study area. The adakitic rocks show crustal signatures such as high K and Th, probably formed as a consequence of higher temperature gradients, at crustal levels, imposed by both slab and mantle partial melts.

Continents grow mainly through magmatism, relamination, accretionary prism development, sediment underplating, tectonic accretion of seamounts, oceanic plateaus and oceanic lithosphere, and collisions of island arcs at convergent margins. The modern Pacific–Rim subduction zone environments present a natural laboratory to examine the nature of these processes. The papers in this special issue focus on the: (1) modern and ancient accretionary margins of Japan; (2) arc–continent collision zone in the Taiwan orogenic belt; (3) accreting versus non-accreting convergent margins of the Americas; and (4) several examples of ancient convergent margins of East Asia. Subduction erosion and sediment underplating are important processes, affecting the melt evolution of arc magmas by giving them special crustal isotopic characteristics. Oblique arc–continent collisions cause strong deformation partitioning that results in orogen-parallel extension, crustal exhumation and wrench faulting in the hinterland, and thrust faulting–folding in the foreland. Trench-parallel widths of subducting slabs exert major control on slab geometries, the degree of coupling–decoupling between the lower and upper plates, and subduction velocity partitioning. An initially large width of the subducting Palaeo-Pacific Plate against East Asia caused flat subduction and resistance to slab rollback during the Triassic Period. These conditions resulted in shortening across SE China. Foundering and delamination of the flat slab during the Early Jurassic Epoch led to slab segmentation and reduced slab widths, followed by slab steepening and rollback. This pull-away tectonics induced lithospheric extension and magmatism in SE China during Late Jurassic – Cretaceous time. Melting of subducted carbonaceous sediments commonly produces networks of silicate veins in CLM that may subsequently undergo partial melting, producing ultrapotassic magmas.

Partial equilibrium textures such as corona provide information on changing pressure–temperature (P-T) conditions experienced by a rock during its geological evolution. Coronae layers may form in single or multiple stages; understanding the genesis of each layer is necessary to correctly extract information regarding the physicochemical conditions experienced by the rock. Mafic rocks from SE Chotanagpur Granite Gneissic Complex, India, show the presence of multi-layered coronae at olivine–plagioclase contact with the mineral sequence: olivine | orthopyroxene | amphibole + spinel | plagioclase. Textural studies indicate that the coronae formed during metamorphism in a single stage due to a reaction between olivine and plagioclase. Reaction modelling shows that the corona formation occurred in an open system and experienced a minor volume loss. Pseudosection modelling and thermobarometry suggest that the P-T conditions related to corona formation are 860 ± 50°C and 7 ± 0.5 kbar. A μMgO-μCaO diagram shows that the layers in coronae formed in response to chemical potential gradients between the reactant minerals. A combination of field observations and the P-T conditions of coronae formation suggest a fluid-driven metamorphism. Correlation with extant geological information indicates that the corona-forming event is possibly related to the accretion of India and Antarctica during the assembly of Rodinia.

Six acidic dykes were discovered surrounding the Laiziling pluton, Xianghualing area, in the western Cathaysia Block, South China. A number of captured zircons are found in two of these acidic dykes. By detailed U–Pb dating, Lu–Hf isotopes and trace-element analysis, we find that these zircons have ages clustered at c. 2.5 Ga. Two acidic dyke samples yielded upper intersection point 206U/238Pb ages of 2505 ± 42 Ma and 2533 ± 22 Ma, and weighted mean 207Pb/206Pb ages of 2500 ± 30 Ma and 2535 ± 16 Ma. The majority of these zircons have high (Sm/La)N, Th/U and low Ce/Ce* ratios, indicating a magmatic origin, but some grains were altered by later hydrothermal fluid. Additionally, the magmatic zircons have high Y, U, heavy rare earth element, Nb and Ta contents, indicating that their host rocks were mainly mafic rocks or trondhjemite–tonalite–granodiorite rock series. Equally, their moderate Y, Yb, Th, Gd and Er contents also indicate that a mafic source formed in a continental volcanic-arc environment. These zircons have positive ϵHf(t) values (2.5–6.9) close to zircons from the depleted mantle, with TDM (2565–2741 Ma) and TDM2 (2608–2864 Ma) ages close to their formation ages, indicating that these zircons originated directly from depleted mantle magma, or juvenile crust derived from the depleted mantle in a very short period. We therefore infer that the Cathaysia Block experienced a crustal growth event at c. 2.5 Ga.

It is generally accepted that oceanic plate subduction has occurred along the eastern margin of Asia since about 500 Ma ago. Therefore, the Japanese Islands have a >500 Ma history of oceanic plate subduction in their geological records. In this paper, the accretionary history of the Japanese Islands is divided into six main stages based on the mode and nature of tectonic events and the temporal gaps in the development of accretionary processes. In the first stage, oceanic plate subduction and accretion started along the margin of Gondwana. After detachment of the North and South China blocks in Devonian time, accretionary complexes developed along island arcs offshore of the South and North China blocks. After the formation of back arc basins such as the Japan Sea, accretionary processes occurred only along the limited convergent margin, e.g. Nankai Trough. Detrital zircons of sandstones revealed the accretionary history of Japan. An evaluation of a comprehensive dataset on detrital zircon populations shows that the observed temporal gaps in the development of the Japanese accretionary complexes were closely related to the intensity of igneous activity in their provenance regions. Age distributions of detrital zircons in the accretionary complexes of Japan change before and after the Middle Triassic period, when the collision of the South and North China blocks occurred.

The late Palaeozoic Yong’an–Meizhou depression belt is an important iron (Fe) and polymetallic metallogenic belt in southern China. It has undergone a transformation from Tethys to the circum-Pacific tectonic domain. The Luoyang deposit is one of the typical Fe skarn deposits in the Yong’an–Meizhou depression belt of eastern China. Garnet is a characteristic mineral in the deposit. Two generations of garnets are detected in the deposit based on their textural characteristics and trace-element contents, and are represented by Fe-enriched andradite. The first generation of garnets (Grt1) have two types of garnets (Grt1-A and Grt1-B). Type A garnets of the first generation (Grt1-A) (Adr80-88) replaced by massive diopside-magnetite assemblage exhibit distinct oscillatory zonings and display patterns of enriched light rare earth elements (LREE) to weak heavy rare earth elements (HREE), with weak negative to positive Eu anomalies, and highest U, ΣREE and Sn contents. Type B garnets of the first generation (Grt1-B) are irregular zones (Adr94-96) coexisting with magnetite, in which Grt1-A is generally dissolved, and have obviously LREE-enriched and HREE-depleted patterns, with weak negative to positive Eu anomalies, and moderate U, ΣREE and Zn contents. Garnets of the second generation (Grt2) (Adr96-99) that replaced massive magnetite together with sphalerite show unzoned patterns, with a flat REE pattern and pronounced negative Eu anomalies as well as contents of lowest U and ΣREE, and highest W. The substitution of REEs in garnets occurs as [X2+]VIII –1[REE3+]VIII +1[Si4+]IV –1[Z3+]IV +1in an Al-enriched environment. Luoyang hydrothermal fluids shifted from reducing conditions with relatively high-U and -ΣREE characteristics to oxidizing conditions with relatively low-U and -ΣREE characteristics. The reduced siderophile elements and increased fO2 in fluid during Grt1-B formation caused magnetite mineralization and reduced Zn contents during Grt2 formation, causing the deposition of sphalerite. All garnets formed from magmatic fluid and were controlled by infiltrative metasomatism in an opened system.

A correlation and interpretation of the sequence stratigraphy of the lower Cambrian strata of NW France is presented and used to characterize basin-wide controls on processes of sedimentation. Deposition occurred in two basins, as two third-order stratigraphic sequences. A northern basin in the Cotentin was dominated by deposition of marine siliciclastic sediments of Sequence 1 (Cambrian Stages 2–3). The primary sediment input was from the NW at La Hague. A middle Normandy basin, SW of Caen, was characterized by deposition of platform carbonates and fine-grained, offshore siliciclastics in Sequence 1 and fluvio-deltaic and marine siliciclastics in Sequence 2 (Cambrian Stages 3–4). Major sediment input points lay to the west in Brittany and to the NE of Caen (in Sequence 2). Lowstand and transgressive systems tract strata dominate both sequences, with local preservation of highstand deposits in basin-centre locations. Fluvial deposits occur at basin margins and display sandstone-dominated facies typical of prevegetation systems. Two styles of fluvially dominated siliciclastic delta are recognized, which show delta-front strata composed of fluvial channels overlying either wave-formed deposits or hyperpycnites. The former formed on shallow shelves, whereas the latter formed where basin bathymetry was steeper and commonly fault controlled. Fossil microbial life forms are conspicuous in Sequence 1, as are intervals of low-diversity bioturbation. The balance of life forms is consistent with the punctuated replacement of algal matgrounds with mixgrounds during early Cambrian time. Super-mature quartz arenites were formed by high-energy wave processes on slowly aggrading basin flanks following marine transgression.

Late Miocene volcanic rocks host the Sari Gunay epithermal gold deposit in NW Iran. These rocks are located within the Hamedan–Tabriz volcanic belt and occupy the northwestern part of the Sanandaj–Sirjan zone (SaSZ). The volcanic rocks span in composition from latite to dacite and rhyolite. Plagioclase, hornblende, biotite and quartz are the main phenocrysts in a fine-grained and glassy matrix. Laser ablation inductively coupled plasma mass spectrometry zircon U–Pb dating yielded crystallization ages of 10.10 ± 0.01 Ma and 11.18 ± 0.14 Ma for rhyolite and dacite, respectively. High ratios of Sr/Y (> 20) and La/Yb (> 20), high contents of Sr (≥ 400 ppm), low contents of MgO (≤ 6 wt%), Y ≤ 18 ppm (c. 16.5 ppm), Yb ≤ 1.9 ppm (c. 1.53 ppm) and weak negative Eu anomalies (Eu*/Eu c. 0.81) are compatible with a high-silica adakitic signature of the rocks. Regarding the location of the study area nearly 100 km from the Zagros suture zone, we argue that delamination of lithospheric mantle beneath the SaSZ has played a key role in the development of the adakitic rocks in a post-collision tectonic regime. The adakitic melts are suggested to have formed by partial melting of delaminated continental lithosphere and/or lower crustal amphibolite following the collision of the Arabian and Iranian plates.

Since Plio-Pleistocene time, southward migration of shortening in the eastern part of the Greater Caucasus into the Kura foreland basin has progressively formed the Kura fold–thrust belt and Alazani piggyback basin, which separates the Kura fold–thrust belt from the Greater Caucasus. Previous work argued for an eastward propagation of the Kura fold–thrust belt, but this hypothesis was based on coarse geological maps and speculative ages for units within the Kura fold–thrust belt. Here we investigate the initiation of deformation within the Gombori range in the western Kura fold–thrust belt and evaluate this eastward propagation hypothesis. Sediments exposed in the Gombori range have a Greater Caucasus source, despite the modern drainage network in the NE Gombori range, which is dominated by NE-flowing rivers. Palaeocurrent analyses of the oldest and youngest syntectonic units indicate a switch happened between ~2.7 Ma and 1 Ma from dominantly SW-directed flow to palaeocurrents more similar to the modern drainage network. A single successful 26Al–10Be burial date indicates the youngest syntectonic sediments are 1.0 ± 1.0 Ma, which, while not a precise age, is consistent with original mapping suggesting these sediments are of Akchagylian–Apsheronian (2.7–0.88 Ma) age. These results, along with recent updated dating of thrust initiation in the eastern Kura fold–thrust belt, suggest that deformation within the Kura fold–thrust belt initiated synchronously or nearly synchronously along-strike. We additionally use topographic analyses to show that the Gombori range continues to be a zone of active deformation.

The Tuting–Tidding Suture Zone (TTSZ), exposed along Dibang and Lohit river valleys in Arunachal Himalaya, NE India, is the easternmost continuation of the Indus–Tsangpo Suture Zone (ITSZ) and consists of ophiolites associated with metabasics and carbonates. Amphibolites, existing at the base of the ophiolite complex, were studied using whole-rock, mineral chemical analyses and pressure–temperature (P-T) pseudosection modelling to understand their metamorphic and petrogenetic history, and interpret the tectonic environment of their formation. They exhibit two-stage deformation, where D1 is depicted by polymineralic inclusion trails in former melt pools and the main foliation represents D2. Sub-alkaline tholeiitic character, high-field-strength element (HFSE) ratios and mid-oceanic ridge basalt (MORB) -like rare earth element (REE) patterns with negative Eu anomaly indicate that the protolith of these amphibolites originated in a spreading regime by extensive partial melting of a depleted mantle source at shallow depth. Petrography, mineral chemistry and P-T modelling indicate a three-stage metamorphic history for them. M1 is the prograde (c. 2.1 GPa, c. 450°C) defined by garnet centre compositions corresponding to the D1 event. The existence of former melts in the samples demarcates the M2 stage (1.4–1.8 GPa, c. 600°C). The rocks later underwent retrogression (M3: 0.8–1.0 GPa, 480–520°C), which corresponds to the D2 event. These observations suggest that the protolith of the TTSZ amphibolites originated in a mid-oceanic ridge setting, which accreted below a subduction zone where it underwent M1 metamorphism followed by M2 metamorphism, corresponding to partial melting of the rocks. Finally, the M3 event occurred during the obduction phase of the ophiolite complex, where the amphibolites were obducted as the metamorphic sole of the TTSZ ophiolites.

The Upper Triassic Xujiahe Formation is a typical tight gas reservoir in which natural fractures determine the migration, accumulation and production capacity of tight gas. In this study, we focused on the influences of natural fractures on the tight gas migration and production. We clarified characteristics and attributes (i.e. dips, apertures, filling degree and cross-cutting relationships) of the fractures based on image logging interpretations and core descriptions. Previous studies of electron spin resonance, carbon and oxygen isotopes, homogenization temperature of fluid inclusions analysis and basin simulation were considered. This study also analysed the fracture sequences, source of fracture fillings, diagenetic sequences and tight gas enrichment stages. We obtained insight into the relationship between fracture evolution and hydrocarbon charging, particularly the effect of the apertures and intensity of natural fractures on tight gas production. We reveal that the bedding fractures are short horizontal migration channels of tight gas. The tectonic fractures with middle, high and nearly vertical angles are beneficial to tight gas vertical migration. The apertures of fractures are controlled by the direction of maximum principal stress and fracture angle. The initial gas production of the vertical wells presents a positive correlation with the fracture abundance, and the intensity and aperture of fractures are the fundamental factors that determine the tight gas production. With these findings, this study is expected to guide the future exploration and development of tight gas with similar geological backgrounds.

The studied seep carbonates from Tsushima, Japan, are embedded within marine siliciclastics of the lower Miocene Taishu Group and represent the earliest evidence of hydrocarbon seepage in the Sea of Japan. In contrast to Miocene and Pliocene examples from Honshu, which are often found above anticlines, the seeps from Tsushima formed within a pull-apart basin before major anticlines had formed. The three carbonates from Fukuzaki, Kanoura and Tanohama are composed chiefly of calcite, with significant admixture of ankerite only at Kanoura. The stable carbon isotope composition of calcites (δ13C as low as −40.2 ‰ VPDB for Fukuzaki, −41.8 ‰ VPDB for Kanoura, and −52.8 ‰ VPDB for Tanohama) indicate methanogenic origin of the carbonates. Textures of these deposits, including radiaxial and yellow cements, are indicative of formation at a methane seep. The stable oxygen isotope composition of calcites (δ18O values as low as −14.4 ‰ VPDB for Fukuzaki, −14.5 ‰ VPDB for Kanoura and −13.9 ‰ VPDB for Tanohama) indicate that they were influenced by burial fluids. Burial diagenesis is also indicated by the stable isotopic compositions of ankerite (δ13C ranging from −19.1 ‰ to −7.1 ‰ VPDB, δ18O from −11.1 ‰ to −9.7 ‰ VPDB). Molecular fossils from Tanohama comprise n-alkanes with short-chain predominance, interpreted to have formed due to thermal cracking of organic matter. The carbonates yield a chemosynthesis-based community comprising vesicomyids Pleurophopsis chitanii, P. cf. hamuroi, the bathymodiolin ‘Bathymodiolus’ akanudaensis, the lucinid Lucinoma sp. and the provannid Provanna? sp., which have never been hitherto identified. ‘Bathymodiolus’ akanudaensis, Lucinoma sp. and Provanna? sp. are the oldest records of these taxa in the Sea of Japan.