In the late 1990s, it was demonstrated that reliable radiocarbon dates could be obtained directly from cremated bone. Many 14C laboratories have since used a protocol for pretreating cremated (calcined) bones that consists of consecutive treatments with bleach and acetic acid to remove organic matter and extraneous or diagenetic carbonate, respectively. In most instances, the bleach used is sodium hypochlorite, although in recent years the Oxford Radiocarbon Accelerator Unit (ORAU) has used acidified sodium chlorite instead. However, properly calcined (white) bones should not contain any organic material; hence, the bleach treatment is potentially unnecessary. This article describes studies investigating the effectiveness of bleach (and the specific bleach used) during pretreatment of calcined bone, and demonstrates that 14C dates on six cremated bone samples are statistically indistinguishable whether or not the initial bleach step is applied.

This paper describes all the major procedures adopted by the Scottish Universities Environmental Research Centre (SUERC) Radiocarbon Dating Laboratory. This includes sample pretreatment, graphite production, accelerator mass spectrometry (AMS) measurement, associated stable isotope measurements, data handling, and age calculations, but with the main emphasis being on the chemical pretreatment methods. All of the above enable the laboratory to provide a complete analytical service comprising advice on sample selection, preparation and analysis of samples, and Bayesian analysis of resulting 14C (and other) data. This applies to both our research and commercial activities. The pretreatment methods that we mainly focus on are used to remove contaminant carbon from a range of sample types or to isolate a particular chemical fraction from a sample prior to combustion/hydrolysis, graphitization, and subsequent AMS 14C measurement. The methods described are for bone (collagen extraction, with and without ultrafiltration), cremated bone, tooth enamel, charcoal, grain, carbon residues, shell, wood (including alpha-cellulose isolation), peat, sediments, textiles, fuel/biofuel, and forensic samples.

Taiwan is a young and seismically active mountain belt, where a series of strong earthquakes (M>7) have occurred over the past hundred years. Identifying historical earthquakes around Taiwan is a key to better constrain the geodynamic of this active region. Sedimentological and geochemical analyses of surface sediments from one station offshore east Taiwan revealed the presence of coarse-grained layers interpreted as turbidites. The age of these layers have been determined by 210Pb, 137Cs, and 241Am chronology. Dating of the three most recent turbidites provides ages of AD 2001±3, AD 1950±5, and AD 1928±10. The results show striking temporal correspondence of turbidite layers to large (M≥6.8) earthquakes recorded in the region since the 20th century. The chronologies of sediment layers lead us to believe that turbidites resulted from the 2003 Taitung earthquake (M 6.8), the 1951 Chengkong earthquake (M 7.1), and the 1935 Lutao earthquake (M 7.0), respectively. Such a good correlation between turbidites and high-magnitude (M≥6.8) historical and instrumental seismic events suggests that turbidite paleoseismology constitutes a valuable tool for earthquake assessment in the eastern Taiwan margin. Moreover, the modern reservoir radiocarbon age and the regional marine reservoir correction (ΔR) of the Kuroshio Current off Taiwan were estimated by comparing accelerator mass spectrometry (AMS) 14C ages with ages derived from corrected 210Pb profiles and historical accounts of identifiable seismic events. Such a determination is important to calibrate the 14C ages of marine materials for accurate comparison of marine and continental geological records. Our calculated mean ΔR value of 232±54 14C yr (n=2) is higher than its modern value of 86±40 14C yr. This high value can be explained by the presence of local upwelling cells and turbulence in the Kuroshio Current, north of Green Island. These upwelling cells bring 14C-depleted water to the surface, resulting in an increase of the modern ΔR value in this portion of the Kuroshio Current.

Annual radiocarbon from a massive Porites lutea coral collected from Hon Tre Island, Vietnam, South China Sea (SCS) was analyzed over a ~100-yr-long period from AD 1900 to 1986. The pre-bomb results from 1900–1953 show a steady Δ14C value of –54.4±1.8‰ (n=60). These values are similar to coral records located in the central and southern SCS and from Indonesian waters, but are lower than those from Japan. Following the input of anthropogenic bomb 14C, our results show a sharp increase in Δ14C from 1960, reaching a peak value of 155.3‰ in 1973. The Hon Tre Island post-bomb Δ14C values are lower than those of other corals located in the SCS and Japan, but higher compared to those in the Indonesian Seas. This study infers a seasonal input of upwelled water depleted in 14C from the deeper SCS basin that originates from the tropical Pacific via the Luzon Strait. The bifurcation of the North Equatorial Current feeds the surface and intermediate currents in the SCS and Makassar Strait region. However, unlike the Makassar site, this study’s coral Δ14C does not receive lower 14C water from the South Pacific Equatorial Current. The Vietnam record therefore represents a unique oceanographic position, reflecting the seasonal influence of older, deeper SCS waters that upwell periodically in this area and have modified the surface waters locally in this region over the last 100 yr.

Quality control of sample material (e.g. charcoal, collagen) is receiving considerable attention in the effort to obtain more reliable 14C dates. The atomic carbon to nitrogen (C:N) ratio is a useful indicator of contamination and/or degradation of bone collagen. Wool and silk are also composed of proteinaceous material such as bone collagen, and the C:N ratio may also be a useful quality indicator for archaeological wool and silk. Analyses of modern undyed, mordanted, non-mordanted, and naturally dyed silk and wool were done in order to determine a C:N range that indicates the sample quality. The C:N range can be different for every material as the amino acid composition of wool, silk, and bone collagen are distinct. The measured minimum and maximum C:N values were used to set up a C:N range of uncontamined and undegraded wool and silk. Then, the C:N ratio and 14C were analyzed of archaeological wool and silk samples. The applicability of the C:N ratio as a quality indicator for archaeological silk and wool was shown by the good agreement of the 14C dates with the presumed historical dates for the uncontaminated samples and the disagreement of the 14C dates with the presumed historical dates for contaminated samples.

Archaeologists have traditionally relied upon relative ceramic chronologies to understand the occupational histories of large and socially complex polities in the Maya lowlands. High-resolution accelerator mass spectrometry (AMS) radiocarbon dating can provide independent chronological control for more discrete events that reflect cultural change through time. This article reports results of AMS 14C dating of stratified sequences at the residential group Tzutziiy K’in, associated with the major Maya polity of Cahal Pech in the Belize Valley. Cahal Pech is one of the earliest permanently settled sites in the Maya lowlands (1200 cal BC), and was continuously occupied until the Terminal Classic Maya “collapse” (~cal AD 800). We use Bayesian modeling to build a chronology for the settlement, growth, and terminal occupation of Tzutziiy K’in, and compare our results to chronological data from the monumental site core at Cahal Pech. The analyses indicate that Tzutziiy K’in was first settled by the Late Preclassic period (350–100 cal BC), concurrent with the establishment of several other large house groups and the growth of the Cahal Pech site core. Terminal occupation by high-status residents at this house group occurred between cal AD 850 and 900. This study provides a framework for interpreting patterns of spatial, demographic, and sociopolitical change between households and the Cahal Pech site core.

A new radiocarbon preparation facility was set up in 2010 at the Godwin Laboratory for Palaeoclimate Research, at the University of Cambridge. Samples are graphitized via hydrogen reduction on an iron powder catalyst before being sent to the Chrono Centre, Belfast, or the Australian National University for accelerator mass spectrometry (AMS) analysis. The experimental setup and procedure have recently been developed to investigate the potential for running small samples of foraminiferal carbonate. By analyzing background values of samples ranging from 0.04 to 0.6 mg C along with similar sized secondary standards, the setup and experimental procedures were optimized for small samples. “Background” modern 14C contamination has been minimized through careful selection of iron powder, and graphitization has been optimized through the use of “small volume” reactors, allowing samples containing as little as 0.08 mg C to be graphitized and accurately dated. Graphitization efficiency/fractionation is found not to be the main limitation on the analysis of samples smaller than 0.07 mg C, which rather depends primarily on AMS ion beam optics, suggesting further improvements in small sample analysis might yet be achieved with our methodology.

This paper presents the first successful methods for accelerator mass spectrometry (AMS) dating of asphalt-impregnated insect chitin from the Rancho La Brea Tar Pits in southern California. A persistent problem with stratigraphic correlation at this site is that asphalt flows are characteristically intermittent and are really discontinuous, which can result in mixing fossils of quite different ages. Direct 14C dating of specimens circumvents this difficulty but requires a pretreatment method that can produce dates from relatively small samples (<10 mg) of insect cuticle, while successfully removing residual asphalt and sample preparation solvents as well as soil carbon contamination. 14C dating accuracy was verified by comparing dates on insect chitin with ages for seeds and twigs compacted during a rapid entrapment event within a separately dated skull of the Western Camel, Camelops hesternus Leidy. All dates fell within a relatively narrow range of ~40,000–44,000 14C yr BP, suggesting that such methods can be used with confidence on other insect material from this site. Insects are often superior paleoenvironmental indicators for establishing precise data points for climate fluctuations. This is because their lifecycles and present-day climate-restricted geographic distributions are well documented, and unlike migrating mammals and birds, insects offer crucial information about the local environment. Our results are therefore potentially significant for studies of paleoecological and paleoclimatic change within the Los Angeles Basin and coastal southern California, as well as reconstruction of entrapment events at Rancho La Brea.

In interpreting radiocarbon dating results, it is important that archaeologists distinguish uncertainties derived from random errors and those from systematic errors, because the two must be dealt with in different ways. One of the problems that archaeologists face in practice, however, is that when receiving dating results from laboratories, they are rarely able to critically assess whether differences between multiple 14C dates of materials are caused by random or systematic errors. In this study, blind tests were carried out to check four possible sources of errors in dating results: repeatability of results generated under identical field and laboratory conditions, differences in results generated from the same sample given to the same laboratory submitted at different times, interlaboratory differences of results generated from the same sample, and differences in the results generated between inner and outer rings of wood. Five charred wood samples, collected from the Namgye settlement and Hongreyonbong fortress, South Korea, were divided into 80 subsamples and submitted to five internationally recognized 14C laboratories on a blind basis twice within a 2-month interval. The results are generally in good statistical accordance and present acceptable errors at an archaeological scale. However, one laboratory showed a statistically significant variance in ages between batches for all samples and sites. Calculation of the Bayesian partial posterior predictive p value and chi-squared tests rejected the null hypothesis that the errors randomly occurred, although the source of the error is not specifically known. Our experiment suggests that it is necessary for users of 14C dating to establish an organized strategy for dating sites before submitting samples to laboratories in order to avoid possible systematic errors.

Expensive and time-consuming preparation procedures for radiocarbon and stable isotope analyses can be conducted on archaeological bone samples even if no collagen is preserved. Such unsuccessful preparation can lead to the partial destruction of valuable archaeological material. Establishing a rapid prescreening method for evaluating the amount of bone collagen while minimizing the impact of sampling constitutes a challenge for the preservation of archaeological collections. This study proposes and discusses a new methodology to detect and quantify collagen content in archaeological bone samples by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. A total of 42 Pleistocene to modern bone samples were selected according to their nitrogen content measured using an elemental analyzer. Comparison of collagen content estimation using ATR-FTIR and mass spectrometry reveals that some of the studied samples are contaminated by a nitrogen source coming from the burial environment. Two different FTIR calibration approaches were tested on the uncontaminated samples: peak-to-peak ratio and multivariate regression (PLS). The two approaches yield similar results with a good correlation of ATR-FTIR analyses and N wt% from 0.7 to 4wt% (R²=0.97–0.99; standard error of estimation ±0.22 to 0.25wt%). While collagen content remains difficult to detect in poorly preserved bones (less than ~3wt%), ATR-FTIR analysis can be a fast alternative for sample screening to optimize the sampling strategy and avoid partial destruction of valuable samples that do not contain enough collagen for further analysis.

Accelerator mass spectrometry (AMS) is the most sensitive method for measuring 129I in environmental samples available today, with a detection limit of about 10–15 for 129I/127I. A drawback of the technique is the time-consuming chemical separation required to prepare AMS targets from raw samples. This step significantly limits applications requiring rapid analyses and large numbers of samples, for example, in monitoring studies associated with nuclear accidents. This work introduces a direct method for 129I measurements by AMS that does not require chemical separation. In this approach, stable iodine (127I) is added to a matrix of niobium (Nb) powder and mixed with dried raw sample. This mixture is pressed directly into a sputter target for AMS analysis. Two types of environmental samples have been tested in this work, seaweed and sediment. No anomalous behavior was noted in the Cs+ sputtering behavior of the targets prepared from these materials. The 129I/127I ratios and 129I concentrations measured by this rapid method were found to be in agreement with reported values that used a conventional AMS method for the same material. Based on our findings, we expect that such rapid measurements can be applied to a wide variety of materials, in addition to seaweed and sediment, as long as the sputtering-induced adverse effects do not prevent the stable operation of the ion source. The method is especially useful for screening large numbers of samples before more precise analyses are made.

This study addresses the development of an absolute chronology for prominent burial sites of Inner Asian nomadic cultures. We investigate Saka archaeological wood from a well-known gold-filled Baigetobe kurgan (burial mound #1 of Shilikty-3 cemetery) to estimate its calendar age using tree-ring and 14C dating. The Saka was the southernmost tribal group of Asian Scythians, who roamed Central Asia during the 1st millennium BC (Iron Age). The Shilikty is a large burial site located in the Altai Mountains along the border between Kazakhstan and China. We present a new floating tree-ring chronology of larch and five new 14C dates from the construction timbers of the Baigetobe kurgan. The results of Bayesian modeling suggest the age of studied timbers is ~730–690 cal BC. This places the kurgan in early Scythian time and authenticates a previously suggested age of the Baigetobe gold collection between the 8th and 7th centuries BC derived from the typology of grave goods and burial rites. Chronologically and stylistically, the Scythian Animal Style gold from the Baigetobe kurgan is closer to Early Scythians in the North Caucasus and Tuva than to the local Saka occurrences in the Kazakh Altai. Our dating results indicate that the Baigetobe kurgan was nearly contemporaneous to the Arjan-2 kurgan (Tuva) and could be one of the earliest kurgans of the Saka-Scythian elite in Central Asia.

Given their sheer number and evidence for long-term prehistoric occupation, atolls occupy a unique position in the peopling of the Pacific. However, they have frequently been overlooked in favor of larger islands due to a host of logistical and other issues. Once viewed as marginal environments, current research is now showing that small islands like these may have been more attractive to settlers than once thought. A new research program in Micronesia is dedicated to examining atolls to better develop baseline chronologies and investigate long-term human adaptations. As part of the initial stage of the project, we present the first radiocarbon dates (n=10) from Mwoakilloa (Mokil) atoll, which support a continuous occupation beginning between 1700–1560 cal BP (2σ). When compared to the settlement of other atoll groups in Micronesia such as the Marshall Islands—along with the nearby high volcanic islands of Pohnpei and Kosrae at approximately 2000–1800 yr ago—the dates from Mwoakilloa suggest a nearly contemporaneous or only slightly later occupation. The recovery of faunal material also demonstrates the translocation of at least two animals (Pacific rat and dog) to the island by humans that was coeval with early settlement. Additionally, there is evidence of landscape transformation in the form of a relatively large artificial mound created by debris and platform accumulation unseen elsewhere in central-eastern Micronesia, but common to atolls. These new dates reinforce the notion that Mwoakilloa and other atolls are integral to understanding prehistoric adaptations across the vast Pacific, though many questions still remain such as to the degree of interaction that occurred with nearby islands and whether settlement was continuous or intermittent through time.

We present the first radiocarbon dates of Early Iron Age sites of central Kazakhstan (in total, 24 dates for 16 recently excavated sites). Archaeologically, the sites have been attributed to the Tasmola culture of the Saka period and later Korgantas phase of the early Hun period. The new accelerator mass spectrometry (AMS) 14C dates suggest that the majority of analyzed Tasmola sites belong to the beginning of the 8th–5th century cal BC, while Korgantas dates to the 4th–2nd century cal BC. This corresponds with the latest archaeological data for the region; however, it is somewhat contrary to the traditional perception of the chronology of the Scythian period in central Kazakhstan. The new dates suggest the beginning of the Early Scythian period in the region in at least the late 9th or 8th century BC rather than 7th century BC according to the traditional approach.

Exposure age dating using in situ10Be and 26Al is a very useful technique for dating fluvial terraces. This is especially true in semiarid regions where other methods suffer from a paucity of suitable dating materials. This article describes sample preparation procedures and analytical benchmarks established at the Xi’an Accelerator Mass Spectrometry (AMS) Center for the study of in situ10Be and 26Al. Four intercomparison samples were analyzed in the study, using an improved sample preparation method. The exposure age results are shown to be in good agreement with published data, and demonstrate the reliability of the dating method. This article also presents new 10Be and 26Al results from quartz samples collected from a series of fluvial terraces from Guanshan River, along the Qilian Shan, northeastern Tibetan Plateau. The ages of three fluvial terraces from the Jinfosi site are shown to be (56.4±5.3) ka for T3, (10.7±1.0) ka for T2, and (7.2±1.0) ka for T1. The dating results are consistent with published data from the same region (10Be, 14C, and optically stimulated luminescence dating methods). A comparison of high-resolution climate records with age constraints for the terrace formation shows a close relationship between terrace formation and climate change.

Reservoir age offsets are widely used to correct marine and speleothem radiocarbon age measurements for various calibration purposes. They also serve as a powerful tracer for carbon cycle dynamics. However, a clear terminology regarding reservoir age offsets is lacking, sometimes leading to miscalculations. This note seeks to provide consistent conventions for reporting reservoir 14C disequilibria useful to a broad range of environmental sciences. This contribution introduces the F14R and δ14R metrics to express the relative 14C disequilibrium between two contemporaneous reservoirs and the R metric as the associated reservoir age offset.

The intracavity optogalvanic spectroscopy (ICOGS) method has been reported to quantify radiocarbon at subambient levels (<1 part per trillion). ICOGS uses a gas sample that is ionized in a low-pressure glow discharge located inside a 14CO2 laser cavity to detect changes in the discharge current under periodic modulation of the laser power to determine the 14CO2 concentration of the sample. When claims of detection thresholds below ambient levels were not verified by other researchers, we constructed a theoretical analysis to resolve differences between these conflicting reports and built and tested an ICOGS system to establish a lower limit of detection. Using a linear absorbance model of the background contribution of 12CO2 and data from the HITRAN database, we estimate that the limit of detection (3σx) is close to 1.5×104 Modern. By measuring a 1.5×104 Modern enriched CO2 sample in a cavity modulation ICOGS system without a clear signal, we conclude that for this system the limit of detection for ICOGS must be above 1.5×104. The implications for previous ICOGS reports are discussed.