Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-24T06:28:55.842Z Has data issue: false hasContentIssue false
  • English
  • Français

UNDERSTANDING THE EMBEDDED CARBON CHALLENGES OF BUILDING SERVICE SYSTEMS

Published online by Cambridge University Press:  27 July 2021

Maria Hein ,
Darren Anthony Jones  and
Claudia Margot Eckert
Maria Hein
Affiliation:
KTH Royal Institute of Technology
Darren Anthony Jones*
Affiliation:
The Open University
Claudia Margot Eckert
Affiliation:
The Open University
*
Jones, Darren, The Open University, STEM-EI, United Kingdom, darren.a.jones@open.ac.uk

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Energy consumed in buildings is a main contributor to CO2 emissions, there is therefore a need to improve the energy performance of buildings, particularly commercial buildings whereby building service systems are often substantially over-designed due to the application of excess margins during the design process.

The cooling system of an NHS Hospital was studied and modelled in order to identify if the system was overdesigned, and to quantify the oversizing impact on the system operational and embodied carbon footprints. Looking at the operational energy use and environmental performance of the current system as well as an alternative optimised system through appropriate modelling and calculation, the case study results indicate significant environmental impacts are caused by the oversizing of cooling system.

The study also established that it is currently more difficult to obtain an estimate of the embodied carbon footprint of building service systems. It is therefore the responsibility of the machine builders to provide information and data relating to the embodied carbon of their products, which in the longer term, this is likely to become a standard industry requirement.

Keywords

Decision makingCase studyRequirementsDesign MarginsOverdesign
Type
Article
Information
Proceedings of the Design Society , Volume 1: ICED21 , August 2021 , pp. 3279 - 3288
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2021. Published by Cambridge University Press

References

Abhang, S., 2020. Over-Engineering: What are the Negative Effects? [online]. Nearby Engineers. Available: https://www.ny-engineers.com/blog/negative-effects-of-over-engineering [Accessed 2020-5-2].Google Scholar
Bawden, A., 2019. The NHS produces 5.4% of the UK's greenhouse gases. How can hospitals cut their emissions? The Guardian, 2019-9-18.Google Scholar
Beggs, C., 2009. Chapter 13 - Energy Efficient Air Conditioning and Mechanical Ventilation. Energy: Management, Supply and Conservation (Second Edition). Beggs, C., ed., p. 252–287.10.1016/B978-0-7506-8670-9.00013-XCrossRefGoogle Scholar
Biswas, W.K., 2014. Carbon footprint and embodied energy consumption assessment of building construction works in Western Australia. Int Journal of Sustainable Built Environment, Vol. 3, No. 2, p.179–186.10.1016/j.ijsbe.2014.11.004CrossRefGoogle Scholar
Butler, S., 2020. Sizing the opportunity (Dynamic Modelling - Right-sizing HVAC) [online]. CIBSE - Chartered Institution of Building Services Engineers. Available: http://portfolio.cpl.co.uk/CIBSE/202003/52/ [Accessed 2020-3-5].Google Scholar
Chen, C. & Crilly, N. (2014). Modularity, Redundancy and Degeneracy: Cross-Domain Perspectives on Key Design Principles. 8th Annual IEEE Systems Conference (SysCon), Ottawa, Canada, IEEE, pp. 546–553. https://doi.org/10.1109/syscon.2014.6819309Google Scholar
Consumers Energy, 2020. Incentives Catalog: Business Energy Efficiency Programs.Google Scholar
Daikin Applied, 2016. Environmental Product Declaration: Centrifugal Chillers [online]. Available: https://oslo.daikinapplied.com/api/sharepoint/GetDocument/Doc100/101.1_Daikin_EPD_Magnitude_centrifugal_chiller_v5.pdf [Accessed 2020-5-7].Google Scholar
Dixit, M.K., Culp, C.H. and Fernández- Solís, J.L., 2013. System boundary for embodied energy in buildings: A conceptual model for definition. Renewable and Sustainable Energy Reviews, Vol. 21, p. 153–164.10.1016/j.rser.2012.12.037CrossRefGoogle Scholar
Djunaedy, E., van den Wymelenberg, K., Acker, B., and Thimmana, H., 2011. Oversizing of HVAC system: Signatures and penalties. Energy and Buildings, Vol. 43, No. 2-3, p. 468–475.10.1016/j.enbuild.2010.10.011CrossRefGoogle Scholar
Eckert, C., Earl, C., Lebjioui, S., and Isaksson, O., 2013. Components Margins through the Product Lifecycle. Product Lifecycle Management for Society. Bernard, A., Rivest, L., and Dutta, D., eds., Vol. 409, p. 39–47.10.1007/978-3-642-41501-2_5CrossRefGoogle Scholar
Eckert, C. and Isaksson, O., 2017. Safety Margins and Design Margins: A Differentiation between Interconnected Concepts. Procedia CIRP, Vol. 60, p. 267–272.10.1016/j.procir.2017.03.140CrossRefGoogle Scholar
European Commission, 2019. Energy performance of buildings directive [online]. Energy - European Commission. Available: https://ec.europa.eu/energy/en/topics/energy-efficiency/energy-performance-of-buildings/energy-performance-buildings-directive [Accessed 2020-3-7].Google Scholar
HVDS, 2017. News Article - Recognise World Environment Day 2017 [online]. Available: https://www.hvds.co.uk/reduce-hvac-carbon-footprint/ [Accessed 2020-11-27]Google Scholar
Ibn-Mohammed, T., Greenough, R., Taylor, S., Ozawa-Meida, L., and Acquaye, A., 2013. Operational vs. embodied emissions in buildings—A review of current trends. Energy and Buildings, Vol. 66, p. 232–245.10.1016/j.enbuild.2013.07.026CrossRefGoogle Scholar
International Atomic Energy Agency (1986), General design safety principles for nuclear power plants: a safety guide. Vienna: International Atomic Energy Agency.Google Scholar
International Energy Agency 2018. News Article - Air conditioning use emerges as one of the key drivers of global electricity-demand growth [online]. Available: https://www.iea.org/news/air-conditioning-use-emerges-as-one-of-the-key-drivers-of-global-electricity-demand-growth [Accessed 2020-11-27]Google Scholar
Jones, D.A. and Eckert, C.M., 2017. Overdesign in building services: the hidden energy use. Presented at 21st International Conference on Engineering Design (ICED17), Vancouver, Canada, 21.-25.08.2017.Google Scholar
Jones, D.A. and Eckert, C.M., 2019. Empowering Decision Makers to Avoid the Oversizing of Building Service Systems. Presented at Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5–8 August 2019.Google Scholar
Jones, D.A. and Eckert, C.M., 2020. Managing Margins: Overdesign in Hospital Building Services. Presented at International Design Conference - Design 2020.10.1017/dsd.2020.340CrossRefGoogle Scholar
Jones, D.A., Eckert, C.M., and Gericke, K., 2018. Margins leading to over-capacity. Presented at 15th International Design Conference, p. 781–792.10.21278/idc.2018.0520CrossRefGoogle Scholar
Jordan, N.D. and Bleischwitz, R., 2020. Legitimating the governance of embodied emissions as a building block for sustainable energy transitions. Global Transitions, Vol. 2, p. 37–46.10.1016/j.glt.2020.01.002CrossRefGoogle Scholar
Li, Q., Wen, B., Wang, G., Cheng, J., Zhong, W., Dai, T., & Han, …, Z. (2018). Study on calculation of carbon emission factors and embodied carbon emissions of iron-containing commodities in international trade of China. Journal of Cleaner Production, 191, 119–126.10.1016/j.jclepro.2018.04.224CrossRefGoogle Scholar
Lockie, S. and Berebecki, P., 2012. Methodology to calculate embodied carbon of materials. 1st edition. Coventry, UK: RICS.Google Scholar
Dixit, Manish K., Culp, Charles H., Fernández-Solís, Jose L., System boundary for embodied energy in buildings: A conceptual model for definition, Renewable and Sustainable Energy Reviews, Volume 21, 2013 10.1016/j.rser.2012.12.037CrossRefGoogle Scholar
Meerow, S., Newell, J. P., & Stults, M. (2016). Defining urban resilience: A review. Landscape and urban planning, 147, 38–49.10.1016/j.landurbplan.2015.11.011CrossRefGoogle Scholar
Natural Resources Canada, 2016. Increasing the energy efficiency of boiler and heater installations [online]. Available: https://www.nrcan.gc.ca/energy/publications/efficiency/industrial/cipec/6699 [Accessed 2020-5-11].Google Scholar
Sartori, I. and Hestnes, A.G., 2007. Energy use in the life cycle of conventional and low – energy buildings: a review article. Energy and Building, 39 (3), p. 249–257.10.1016/j.enbuild.2006.07.001CrossRefGoogle Scholar
Soliman, M.A., 2012. Pitfalls of oversizing plant rotating equipment. Presented at Abu Dhabi International Petroleum Conference and Exhibition, Society of Petroleum Engineers.10.2118/159449-MSCrossRefGoogle Scholar
Soliman, M.A., 2019. Adverse Effect of Oversizing Upstream Gas Oil Separation Plants on Energy Consumption. Presented at International Petroleum Technology Conference, International Petroleum Technology Conference.10.2523/IPTC-19234-MSCrossRefGoogle Scholar
Statistics (2020) https://www.statista.com/statistics/414960/global-market-for-commercial-and-residential-hvac-systems/Google Scholar
Sulzer, 2013. Environmental Product Declaration: Environmental and economic life cycle performance including climate-related data - SMD Double Suction Pump. Available: https://www.sulzer.com/-/media/files/about-us/our-company/sustainability/epd/sulzer_epd_smd_pump.ashx?la=en [Accessed 2020-5-7].Google Scholar
Swedish Energy Agency, 2013a. Energy efficiency of large cooling systems).Google Scholar
Swedish Energy Agency, 2013b. Energy efficiency of large heating systems).Google Scholar
Swedish Energy Agency, 2015. Dimension your heating system correctly) [online]. Available: http://www.energimyndigheten.se/energieffektivisering/jag-vill-energieffektivisera-hemma/inkop-av-produkter/uppvarmning/varme--och-luftkonditioneringssystem/effektivisera-ditt-varmesystem/ar-ditt-varmesystem-ratt-dimensionerat/ [Accessed 2020-5-3].Google Scholar
Trane, 2011. Chiller System Design and Control.Google Scholar
Vilches, A., Garcia-Martinez, A., and Sanchez-Montañes, B., 2017. Life cycle assessment (LCA) of building refurbishment: A literature review. Energy and Buildings, Vol. 135, p. 286–301.10.1016/j.enbuild.2016.11.042CrossRefGoogle Scholar
Visual Paradigm, 2020. Ideal Modeling & Diagramming Tool for Agile Team Collaboration [online]. Available: https://www.visual-paradigm.com/ [Accessed 2020-5-8].Google Scholar
Yeo, Z., Ng, R., and Song, B., 2016. Technique for quantification of embodied carbon footprint of construction projects using probabilistic emission factor estimators. Journal of Cleaner Production, Vol. 119, p.135–151.10.1016/j.jclepro.2016.01.076CrossRefGoogle Scholar