Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-17T08:28:27.340Z Has data issue: false hasContentIssue false
  • English
  • Français

UO2. Matrix Dissolution Rates and Grain Boundary Inventories of Cs, Sr, and Tc in Spent Lwr Fuel

Published online by Cambridge University Press:  28 February 2011

W. J. Gray  and
D. M. Strachan
W. J. Gray
Affiliation:
Pacific Northwest Laboratory(a), P. 0. Box 999, Richland, WA 99352
D. M. Strachan
Affiliation:
Pacific Northwest Laboratory(a), P. 0. Box 999, Richland, WA 99352
Get access

Abstract

Experimental methods have been developed for measuring the grain-boundary inventories of radionuclides and for determining whether the UO2 matrix of spent light-water reactor fuel dissolves congruently. Both methods depend upon first separating the fuel into individual grains. With the grain boundaries thus exposed, the associated inventories of radionuclides can be completely dissolved and measured. To determine whether the UO2 matrix of spent fuel dissolves congruently, the fuel grains were placed in a flow-through column and water was pumped through the column at a rate sufficient to maintain the concentration of U in the column effluent far below saturation. Once the grain-boundary material has dissolved, the forward dissolution rate of the UO2 matrix can be measured and, by measuring the concentrations of other radionuclides in the column effluent, the degree of congruency of the dissolution process can be determined. Data obtained to date indicate that the grain-boundary inventories of Cs, Tc, and Sr are approximately equal to gap inventories and that the fractional dissolution rate of Cs from the U02 matrix is approximately equal to that of U, i.e., the Cs and U dissolved nearly congruently. In addition, the data appear to show a gradient in the concentrations of Cs and Sr across the individual UO2 grains.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 212: Symposium P – Scientific Basis for Nuclear Waste Management XIV , 1990 , 205
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wilson, C. N., Results from NNWSI Series 3 Spent Fuel Dissolution Tests, PNL-7170, Pacific Northwest Laboratory, Richland, WA, 1990.Google Scholar
2. Johnson, L. H., Garisto, N. C., and Stroes-Gascoyne, S., in Waste Management ‘85. Vol. 1–High-Level Waste, edited by Post, R. G., pp. 479–482. Proceedings of the Symposium on Waste Management at Tucson, Arizona, March 24–28, 1985.Google Scholar
3. O’Connell, W. J. and Drach, R. S., Waste Package Performance Assessment: Deterministic System Model Program Scope and Specification. UCRL-53761, Lawrence Livermore National Laboratory, Livermore, CA, 1986.CrossRefGoogle Scholar
4. Apted, M. J., Liebetrau, A. M., and Engel, D. W., in Waste Management ’87. Vol 2–High-Level Waste, edited by Post, R. G., pp. 545–554. Proceedings of the Symposium on Waste Management at Tucson, Arizona, March 1–5, 1987.Google Scholar
5. Garisto, N. C., Vance, E. R., Stroes-Gascoyne, S., and Johnson, L. H., Instant-Release Fractions for the Assessment of Used Nuclear Fuel Disposal. AECL-9892, Whiteshell Nuclear Research Establishment, Pinawa, Manitoba, Canada, 1989.Google Scholar
6. Stroes-Gascoyne, S., Johnson, L. H., and Sellinger, D. M., Nucl. Technol. 77, 320 (1987).CrossRefGoogle Scholar
7. Davis, R. B. and Pasupathi, V., Data Summary Report for the Destructive Examination of Rods G7. G9. J8. 19. and H6 from Turkey Point Fuel Assembly B17. HEDL-TME 80–85, Westinghouse Hanford Company, Richland, WA, 1981.Google Scholar
8. Guenther, R. J., et al., Characterization of Spent Fuel Approved Testing Material - ATM-103. PNL-5109–103, Pacific Northwest Laboratory, Richland, WA, 1988.CrossRefGoogle Scholar
9. Guenther, R. J., et al., Characterization of Spent Fuel Approved Testing Material - ATM-105. PNL-5109–105, Pacific Northwest Laboratory, Richland, WA, 1989.Google Scholar
10. Guenther, R. J., et al., Characterization of Spent Fuel Approved Testing Material - ATM-106. PNL-5109–106, Pacific Northwest Laboratory, Richland, WA, 1988.CrossRefGoogle Scholar
11. Thomas, L. E., Einziger, R. E., and Woodley, R. E., J. Nucl. Mater. 166, 243 (1989).CrossRefGoogle Scholar
12. Thomas, L. E. and Guenther, R. J., in Scientific Basis for Nuclear Waste Management XII. edited by Lutze, W. and Ewing, R. C. (Materials Research Society, Pittsburgh, PA, 1988), 127, p. 293.Google Scholar
13. Johnson, L. H. and Shoesmith, D. W., in Radioactive Waste Forms for the Future, edited by Lutze, W. and Ewing, R. C. (North-Holland Publishers, New York, 1988) pp. 635–699.Google Scholar
14. Garisto, N. C., Johnson, L. H. and Hocking, W. H., in Proceedings of the Second International Conference on CANDU Fuel, edited by Hastings, I. J., Pembroke, Ontario, Canada, October 1–5, 1989. pp. 352–368.Google Scholar