Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-19T10:36:01.531Z Has data issue: false hasContentIssue false
  • English
  • Français

Principles and Applications of Wafer Curvature Techniques for Stress Measurements in Thin Films

Published online by Cambridge University Press:  22 February 2011

Paul A. Flinn
Paul A. Flinn*
Affiliation:
Intel Corporation, SC9-45, 2250 Mission College Blvd, Santa Clara, CA. 95124 and Dept. of Materials Science and Engineering, Stanford University, Stanford, CA 94305.
Get access

Abstract

Measurement of the curvature induced in a wafer (or other flat plate) by the stress in a thin film has long been used as a convenient and accurate technique for the determination of the stress. Numerous improvements over the years have led to instruments that provide simple and rapid measurements of stress as a function of the time and temperature for any desired thermal history. A computer controlled instrument using laser scanning will be briefly described and its capabilities and limitations discussed.

Applications of the technique to a variety of thin film materials will be discussed. In addition to the effects of differences in thermal expansion, stresses associated with various deposition techniques, gain or loss of material, phase transformations and flow will be considered. In aluminum based systems, themal expansion, plastic flow and phase transformation play major roles. Refractory metals show, in addition, large stresses associated with the deposition process. In inorganic dielectric systems thermal expansion effects are usually relatively small; deposition effects and the gain or loss of material are the dominant effects. Silica based glasses formed by chemical vapor deposition, for example, show large stress changes due to gain or loss of water, and plasma deposited silicon nitride films show large effects associated with hydrogen. Overall, determination of the stress as a function of time and temperature is a valuable part of the evaluation of a thin film material for use in a VLSI device.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 130: Symposium C – Thin Films: Stresses and Mechanical Properties I , 1988 , 41
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Davidenkov, N. N., “Measurement of Residual Stresses in Electrolytic Deposits”, Soviet Physics -Solid State, Vol.2, 1961, pp. 2595–2598.Google Scholar
2. Pulker, H. K., “Mechanical Properties of Optical Films”, Thin Solid Films, Vol.89, 1982, pp. 191–204.CrossRefGoogle Scholar
3. Doemer, M. F. and Nix, W. D., “A Method for Interpreting the Data from Depth-sensing Indentation Instruments”, Journal of Materials Research, Vol.1, 1986, pp. 601–609.Google Scholar
4. James, M. R. and Cohen, J. B., “The Measurement of Residual Stresses by X-Ray Diffraction Techniques”, in Treatise on Materials Science and Technology, Vol 19A, H., Herman, ed., Academic Press, New York, 1980, pp. 1–62.Google Scholar
5. Segrnueller, A. and Murakami, M., “X-Ray Diffraction Analysis of Strains and Stresses in Thin Films”, in Treatise on Materials Science and Engineering, Vol.27, H., Herman, ed., Academic Press, New York, 1988, pp. 143–200.Google Scholar
6. Segmueller, A., Angilelo, J. and LaPlaca, S. J., “Automatic X-ray Diffraction Measurement of the Lattice Curvature of Substrate Wafers for the Determination of Linear Strain Patterns”, Journal of Applied Physics, Vol.51, 1980, pp. 6224–6230.Google Scholar
7. Hoffman, R. W., “The Mechanical Properties of Thin Condensed Films”, in Physics of Thin Films, Hass, G. and Thun, R. E., ed., Academic Press, New York, Vol.3, 1966, pp. 211–273.Google Scholar
8. Brantley, U. A., “Calculated Elastic Constants for Stress Problems Associated with Semiconductor Devices”, Journal of Applied Physics, Vol.44, 1973, pp. 534–535.Google Scholar
9. Sinha, A. K., Levenstein, H. J. and Smith, T. E., “Thermal Stresses and Cracking Resistance of Dielectric Films on Si Substrates”, Journal of Applied Physics, Vol.49, 1978, pp. 2423–2426.10.1063/1.325084Google Scholar
10. van Nie, A. G., “A Method for the Determination of the Stress in, and Young's Modulus of Silicon Nitride Passivation Layers”, Solid State Technology, Vol.23, 1980, pp. 81–84.Google Scholar
11. Flinn, P. A., Gardner, D. S. and Nix, W. D., “Measurement and Interpretation of Stress in Aluminum-Based Metallization as a Function of Thermal History”, IEEE Transactions on Electron Devices, Vol. ED–34, 1987, pp. 689–699.Google Scholar
12. McInerney, E. J. and Flinn, P. A., “Diffusivity of Moisture in Thin Films”, Proceedings of the 20th Annual International Reliability Symposium, IEEE, 1982, pp. 264–267.CrossRefGoogle Scholar
13. Pan, J. T. and Blech, I., “In situ Stress Measurement of Refractory Metal Silicides during Sintering”, Journal of Applied Physics, Vol.55, 1984, pp. 2874–2880.CrossRefGoogle Scholar
14. Luxon, J. T. and Parker, D. E., Low Power Laser Applications, Prentice-Hall, Englewood Cliffs, N.J., 1985, ch. 9.Google Scholar
15. Doemer, M. F., Gardner, D. S., and Nix, W. D., “Platic Properties of Thin Films on Substrates as Measured by Sub-Micron Indentation Hardness and Substrate Curvature Techniques”, Journal of Materials Research, Vol.1, 1986, pp. 845–851.Google Scholar
16. Shioya, Y., Itoh, T., Inoue, S. and. Maeda, M., “Analysis of Stress in Chemical Vapor Deposition Tungsten Silicide Film”, Journal of Applied Physics, Vol.58, 1985, pp. 4194–4199.10.1063/1.335552CrossRefGoogle Scholar
17. Gardner, D. S. and Flinn, P. A., “Mechanical Stress as a Function of Temperature in Thin Aluminum Films and its Alloys”, Proceedings of the Materials Research Society - Symposium C, Materials Research Society, 1988.Google Scholar
18. Ashby, M. F. and Frost, H. J., “The Kinetics of Inelastic Deformation above 0 K.”, in Constitutive Equations in Plasticity, Argon, A. S., ed., MIT Press, Cambridge, MA, 1975, pp. 117–147.Google Scholar
19. Budhani, R. C., Bunshah, R. F. and Flinn, P. A., “Kinetics of Structural Relaxation and Hydrogen Evolution from Plasma Deposited Silicon Nitride”, Applied Physics Letters, Vol.52, 1988, pp. 284–286.Google Scholar