Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-24T22:00:19.218Z Has data issue: false hasContentIssue false
  • English
  • Français

Polymerization of C-Si Films on Metal Substrates: Potential Adhesion/Diffusion Barriers for Microelectronics

Published online by Cambridge University Press:  10 February 2011

Li Chen  and
J. A. Kelber
Li Chen
Affiliation:
Department of Chemistry, University of North Texas, Denton, TX 76203
J. A. Kelber
Affiliation:
Department of Chemistry, University of North Texas, Denton, TX 76203
Get access

Abstract

Carbon-Silicon polymeric films have been formed by electron beam bombardment (500eV) of molecularly adsorbed vinyl silane precursors under ultra-high vacuum (UHV) conditions. Temperature programmed desorption (TPD) studies show that polymerization is occurring via the vinyl groups, while Auger spectra show that the polymerized films have compositions very similar to the starting precursors; vinyltrichlorosilane (VTCS) or vinyltrimethylsilane(VTMS). VTCSderived films ˜ 100 Å thick show no reaction with Cu substrates and no diffusion of Cu until temperatures greater than 700 K, while Cu deposited on VTMS films on Al substrates show no diffusion prior to Al reaction/decomposition at 600 K. Auger and TPD studies also show that fluorocarbon precursors, such as perfluorobenzene can be incorporated into the films by e-beaminduced reactions, a first step in the controlled growth of adherent polymer films on unreactive substrates such as Cu.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 511: Symposium E – Low Dielectric Constant Materials IV , 1998 , 297
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. The National Technology Roadmap for Semiconductors; Technology Needs, Semiconductor Industry Association, San Jose, CA, 1997, pp.99–110 Google Scholar
2. Xu, J., Choyke, W. J. and Yates, J. T., Jr., Applied Surface Science 120, 279 (1997)Google Scholar
3. Murray, E., Prasad, J., Cabibil, H. and Kelber, J. A., Surface Science 319, 1 (1994)Google Scholar
4. Davis, L. E., MacDonald, N. C., Palmberg, P. W., Riach, G. E. and Weber, R. E., Handbook of Auger Electron Spectroscopy, 2nd Edition, Physical Electronics Industries, Inc., Eden Prairie, Minnesota, 1976, pp. 1–12 Google Scholar
5. Chen, Li and Kelber, J. A., in preparationGoogle Scholar
6. Attenuation of the Al signal to perhaps 0.03% of its original signal would require an overlayer equal to a thickness four times the mean free path of the Al Auger electron (5Å - 10Å). Therefore 100Å is a conservative estimate of film. See Somorjai, Gabor A., Introduction to Surface Chemistry and Catalysis, J. Wiley and Sons, Inc. New York, 1994 pp. 382–95Google Scholar
7. Houston, J. E., Peebles, D. E. and Gooman, D. W., J. Vac. Sci. Technol. A 1, 995 (1983)Google Scholar
8. Wiegand, B. C., Lohokare, S. P. and Nuzzo, R. G., J. Phys. Chem. 97, 11553 (1993)Google Scholar