Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-19T03:20:01.627Z Has data issue: false hasContentIssue false
  • English
  • Français

Parameters for Ductility Improvement in TiAl

Published online by Cambridge University Press:  26 February 2011

T. Kawabata ,
Takashi Tamura  and
O. Izumi
T. Kawabata
Affiliation:
Institute for Materials Research, Tohoku University, Sendai, 980, Japan.
Takashi Tamura
Affiliation:
Graduate Student of Tohoku University; Present address, NKK Corporation, Kawasaki, 210, Japan.
O. Izumi
Affiliation:
Institute for Materials Research, Tohoku University, Sendai, 980, Japan.
Get access

Abstract

The effect of the Ti/Al ratio and third elements (Cr, Hf and Nb) on the mechanical properties of TiAl has been studied. Solution hardening in these elements is so large that, e.g., the strength doubles by the addition of 3 at.% Cr. Ductility to fracture strain has been improved up to 2.7 % and 2.7 % by the Cr addition and the use of high purity base metals, respectively. Parameters relating to the improvement of ductility have been discussed. Namely, the improvement of ductility was caused by the decreases of the grain size, axial ratio and impurity. A hypothesis has been proposed that the ductility improvement was related with the excess shrinkage of volume of a unit cell due to the addition of the third element which implies the strengthening of chemical bonds and vice versa. The effect of twins and a lamellar structure with the plate-like Ti3Al and the matrix on the ductility have been discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 133: Symposium H – High-Temperature Ordered Intermetallic Alloys III , 1988 , 329
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. MacAndrew, J.B. and Kessler, H.D., J. Metals, 8, 1348 (1956).Google Scholar
2. Lipsitt, H.A., Shechtman, D. and Schafrik, R.E., Metall. Trans. 6A, 1991 (1975).Google Scholar
3. Blackburn, M.J. and Smith, M.P., United States Patent, No. 4,294,615 (1981).Google Scholar
4. Hashimoto, K., Doi, H., Kasahara, K. and Tsujimoto, T., Proceedings of Fall Meeting of JIM, p. 550 (1985).Google Scholar
5. Hanamura, T., Uemori, R. and Tanino, M., J. Materials Res. 3, 656 (1988).Google Scholar
6. Martin, P.L., Lipsitt, H.A., Nuhfer, N.T. and Williams, J.C., Titanium '80, Science and Technology, edited by Kimura, H. and Izumi, O., Metall. Soc. of AIME, New York, p. 1245 (1980).Google Scholar
7. Kawabata, T., Tadano, M. and Izumi, O., Scripta Metall. 22, 1725 (1988).Google Scholar
8. Lipsitt, H.A., Shechtman, D. and Schafrik, R.E., Metall. Trans. 11A, 1369 (1980).Google Scholar
9. Blackburn, M.J., in The Science, Technology and Application of Titanium, Edited by Jaffee, R. and Promisel, N., Pergamon Press, New York, p. 633, (1970).Google Scholar