Hostname: page-component-7c8c6479df-94d59 Total loading time: 0 Render date: 2024-03-28T13:36:22.324Z Has data issue: false hasContentIssue false

Nature and Application of Particulate Matter Produced by Pulsed Laser Ablation

Published online by Cambridge University Press:  01 January 1992

Li-Chyong Chen
Affiliation:
General Electric Corporate Research and Development, Schenectady, NY12301
Ernest L. Hall
Affiliation:
General Electric Corporate Research and Development, Schenectady, NY12301
Get access

Abstract

Particulates produced by 248 nm KrF excimer laser ablation were investigated in two systems: Nb-Al and Cr-Nb. Both systems contain intermetallics which are potentially useful high temperature materials. While the melting temperature of Nb is three times higher than that of Al, the melting temperature difference between Nb and Cr is less substantial. This work focuses on the effects of melting temperature difference between the terminal elements in binary alloy systems on the nature of the particulate matter formed by laser ablation.

Transmission (TEM) and scanning electron microscopy (SEM), energy dispersive X-rayanalysis (EDX), and optical image analysis were used to characterize the products. The particulate generation rate and the size distribution depend on various growth parameters. In both Nb-Al and Cr-Nb systems, the particulates are all enriched in Nb, with the smallest particulates richest in Nb. Single phase particulates containing barely detectable Al were found in Nb-Al system. In the Cr-Nb system, electron diffraction patterns indicate two types of particulates: one exhibiting a new metastable diamond cubic structure and the other being a two phase mixture of bcc Cr and bcc Nb. A plausible mechanism whereby the lower melting temperature element is depleted as well as the correlation of the particulate size and the overall composition of individual particulate will be discussed. Stoichiometric studies of the particulatesgenerated in the Nb-Al and Cr-Nb systems using the pulsed laser deposition (PLD) technique help illustrate the merits and limitations of the same. One example of the potential applications of the particulate-containing films will be demonstrated.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. MRS Bulletin Vol. XVII(2), February issue (1992).Google Scholar
2. Chen, L. C., in Pulsed Laser Depositionof Thin Films, Hubler, G. and Chrisey, D., ed., Chapter 6, John Wiley & Sons, Inc., New York (to be published).Google Scholar
3. Kautek, W., Thin Solid Films 191, 317 (1990).Google Scholar
4. Koren, G., Baseman, R. J., Gupta, A., Lutwyche, M. I., and Laibowitz, R. B., Appl. Phys. Lett. 56, 2144 (1990).Google Scholar
5. Misra, D. S., and Palmer, S. B., Physica C 176, 43 (1991).Google Scholar
6. Blank, D. H. A., IJsselsteijn, R. P. J., Out, P. G., Kuiper, H. J. H., Flokstra, J., and Rogalla, H., Materials Science and Engineering B13, 67 (1992).Google Scholar
7. Dyer, P. E., Key, P. H., and Monk, P., Appl. Surf. Sci. 54, 160 (1992).Google Scholar
8. Gagliano, F. P., and Paek, U. C., Applied Optics 13, 274 (1974).Google Scholar
9. Lubben, D., Barnett, S. A., Suzuki, K., Gorbatkin, S., and Greene, J. E., J. Vac. Sci. Technol. B3, 968 (1985).Google Scholar
10. Dubowski, J. J., Proc. Soc. Photo-Opt. Instrum. Eng. 668, 97 (1986).Google Scholar
11. Dupendant, H., Gavigan, J. P., Givord, D., Lienard, A., Rebouillat, J. P., and Souche, Y., Applied Surface Science 43, 369 (1989).Google Scholar
12. Chen, L. C., Hall, E. L., and Lou, K. A., in Intermetallic Matrix Composites II, Miracle, D. B. et al. eds., MRS 273, 377 (1992).Google Scholar
13. Thompson, M., Chenery, S., and Brett, L., J. Anal. Atomic Spectrosc. 5, 49 (1990).Google Scholar
14. Chenery, S., Hunt, A., and Thompson, M., J. Anal. Atomic Spectrosc. 7, 647 (1992).Google Scholar
15.Some suggestions on the functional dependence of the particulate size and/or volume fraction on the laser fluence are presented in reference 2.Google Scholar
16. Dushman, S., Scientific Foundations of Vacuum Technique, John Wiley & Sons, Inc. New York (1955).Google Scholar
17. Povarova, K. B., RUSS. Metall. (GB) 2, 134 (1981).Google Scholar
18. German, R. M., Powder Metallurgy Science, Metal Powder Industries Federation, Princeton, New Jersey (1984).Google Scholar