Hostname: page-component-8448b6f56d-tj2md Total loading time: 0 Render date: 2024-04-18T06:17:47.086Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical and Thermophysical Properties of Silicon Nitride Thin Films at High Temperatures Using In-Situ Mems Temperature Sensors

Published online by Cambridge University Press:  10 February 2011

Patricia Nieva ,
Haruna Tada ,
Paul Zavracky ,
George Adams ,
Ioannis Miaoulis  and
Peter Wong
Patricia Nieva
Affiliation:
Microfabrication Laboratory, Department of Electrical and Computer Engineering, Northeastern University
Haruna Tada
Affiliation:
Thermal Analysis of Materials Processing Laboratory, College of Engineering, Tufts University
Paul Zavracky
Affiliation:
Microfabrication Laboratory, Department of Electrical and Computer Engineering, Northeastern University
George Adams
Affiliation:
Microfabrication Laboratory, Department of Electrical and Computer Engineering, Northeastern University
Ioannis Miaoulis
Affiliation:
Thermal Analysis of Materials Processing Laboratory, College of Engineering, Tufts University
Peter Wong
Affiliation:
Thermal Analysis of Materials Processing Laboratory, College of Engineering, Tufts University
Get access

Abstract

The optimization of microelectronic devices and Microelectromechanical Systems (MEMS) technology depends on the knowledge of the mechanical and thermophysical properties of the thin film materials used to fabricate them. The thickness, stoichiometry, structure and thermal history can affect the properties of thin films causing their mechanical and thermophysical properties to diverge from bulk values. Moreover, it is known that the mechanical and thermophysical properties of thin films vary considerably at different temperatures. Bulk properties of semiconductors have been characterized over a wide range of temperatures; however there is limited information on thin film properties of silicon-based compounds such as silicon nitride, specially at high temperatures. In our work, MEMS devices designed to record the localized maximum temperature during high temperature thermal processes, which we call Breaking T-MEMS, will be presented as a way to determine some of the mechanical properties (Young's modulus and fracture strength) and thermophysical properties (coefficient of thermal expansion) of silicon-rich nitride thin films at high temperatures.

The Breaking T-MEMS device consists of a thin film bridge suspended over a substrate. During testing, the devices are thermally loaded in tension by heating the sample. The low coefficient of thermal expansion of the film relative to that of the substrate causes the thin film bridge to break at a specific temperature. Through a combination of indirect experimental measurements, analytical expressions, numerical and statistical analysis, and if the experiments are conducted using at least two different substrates of known temperaturedependent coefficients of thermal expansion, some of the material properties of the film can be calculated from the breaking temperatures of various devices. The two candidate materials for the substrate are silicon and aluminum oxide (sapphire).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 546: Symposium AA – Materials Science of Microelectromechanical Systems (MEMS)… , 1998 , 97
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Obermeier, E., Mat. Res. Soc. Symp. Proc. Vol. 444, 39–57, (1997).Google Scholar
2. King, J. A., Materials Handbook for Hybrid Microelectronics, Artech House, Inc. (1988).Google Scholar
3. Milek, J. T., in Handbook of Electronic Materials, compiled by Electronic Properties Information Center (Hughes Aircraft Company, Culver City, California, 1971), Vol. 3, p. 61.Google Scholar
4. Campbell, D. S., in Handbook of Thin Film Technology, edited by Maissel, L. I. and Glang, R. (McGraw-Hill Book Company, New York, 1983), chap. 12.Google Scholar
5. Mehregany, M., Howe, R. T., Senturia, S. D., J. Appl. Phys., Vol. 62 (9), 3579–3584, (1987).Google Scholar
6. Guckel, H., Bums, D. W., Visser, C. C. G., Tilmans, H. A. C. and DeRoo, D., IEEE Trans. Electron Devices, ED-35, 800, (1988).Google Scholar
7. Johansson, S., Schweitz, J-A., Tenerz, L., Tiren, J., J. Appl. Phys., Vol. 63 (10), 4799–4803, (1988).Google Scholar
8. Fan, L. S., Howe, R. T., Muller, R. S., Sensors and Actuators, A21–A23, 872–874, (1990).Google Scholar
9. Tai, Y. C., Muller, R. S., IEEE Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, U.S.A., 88–91, (June 6 – 9, 1988).Google Scholar
10. Anderson, T. L., Fracture Mechanics Fundamentals and Applications, (CRC Press, Florida, 1991), p. 21, 714.Google Scholar
11. Burkhardt, P. J., Marvel, R. F., Electrochemical Society, Vol. 116 (6), 864–866, (1969).Google Scholar
12. Tiwary, H. V., Sao, G. D., J. Phys. E: Sci. Instrum., Vol. 14, 1378, (1981).Google Scholar
13. Petersen, K. E., Guamieri, C. R., J. Appl. Phys., Vol. 50 (11), pp.6761–6766, (1979).Google Scholar
14. Kiesewetter, L., Zhang, J. M., Houdeau, D., Steckenbom, A., Sensors and Actuators A, Vol. 35, pp. 153–159, (1992).Google Scholar
15. Nieva, P. M., Zavracky, P. M., Adams, G. G., Tada, H., Abramson, A. R., Miaoulis, I., Wong, P. Y., presented at the 5th ASME/JSME Joint Thermal Engineering Conference, San Diego, CA, 1999 (in press).Google Scholar
16. Tada, H., Nieva, P. M., Zavracky, P. M, Miaoulis, I., Wong, P. Y., to be presented at the Mat. Res. Soc., Fall 98, Symposium AA, Boston, MA, 1998 (in press).Google Scholar