Hostname: page-component-7c8c6479df-5xszh Total loading time: 0 Render date: 2024-03-28T14:47:04.023Z Has data issue: false hasContentIssue false

Materials Issues in the Application of Silicon Nitride Films in Silicon MEMS

Published online by Cambridge University Press:  15 March 2011

David F. Moore
Affiliation:
Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1 PZ, UK Telephone 44 1223 332656 Fax 44 1223 332662, E-mail dfm1@cam.ac.uk
Roger M. Bostock
Affiliation:
Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1 PZ, UK Telephone 44 1223 332656 Fax 44 1223 332662, E-mail dfm1@cam.ac.uk
Paul Boyle
Affiliation:
Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1 PZ, UK Telephone 44 1223 332656 Fax 44 1223 332662, E-mail dfm1@cam.ac.uk
Ewan H. Conradie
Affiliation:
Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1 PZ, UK Telephone 44 1223 332656 Fax 44 1223 332662, E-mail dfm1@cam.ac.uk
Get access

Abstract

This paper reviews bulk micromachining of Si, with particular reference to the microassembly and packaging of optical and electronic components. Taking as an example the use of 2.3 [.proportional]m thick silicon nitride microclips to hold an optic fibre in place in a silicon V-groove, the potential of thin film packaging is briefly assessed. The fabrication process is to: [i] deposit a controlled stress silicon nitride layer onto a blank (100) oriented silicon wafer by chemical vapour deposition (standard LPCVD but silicon rich); [ii] pattern the silicon nitride clip mask shape by optical lithography and reactive ion etching; and [iii] remove the underlying silicon to form a V-shaped groove with an anisotropic liquid etch process using the silicon nitride as a mask. From the measured deflection of a silicon nitride beam when a force is applied, the Young's modulus is 400 GPa. The beams are rugged and a clipping force of 10 N per metre of optic fibre length is achieved.

This approach to applying the mechanical properties of thin films is compatible with standard thin film technology, enables precise microassembly, and has great potential to reduce manufacturing costs in a wide range of sensors and microsystems. In some applications high temperature processing must be avoided, even early on in the manufacturing process. Using low temperature processing, robust clips from silicon nitride made by plasma enhanced chemical vapour deposition (PECVD and hydrogen rich) are made, but the Young's modulus of this material is typically 40 GPa and the clipping force is correspondingly small. The paper concludes by assessing the prospects for other thin film materials in mechanical MEMS and packaging.

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Madou, M.J., Fundamentals of microfabrication, (CRC Press, Boca Raton 1997) ISBN 849394511Google Scholar
2. Elwenspoek, M., Jansen, H., Silicon micromachining, (Cambridge University Press, 1999) ISBN 052159054XGoogle Scholar
3. Peterson, K.E., IEEE Transactions on Electron Devices 25, 1241 (1978)Google Scholar
4. Bustillo, J.M., Howe, R.T., Muller, R.S., IEEE Proceedings 86, 15521574 (1998)Google Scholar
5. Strandman, C., Bäcklund, Y., IEEE Journal Microelectromechanical Systems 6, 3540 (1997)Google Scholar
6. Bostock, R.M., Collier, J.D., Jansen, R-J.E., Jones, R., Moore, D.F. and Townsend, J.E., Journal Micromechanics Microengineering 8, 343360 (1998)Google Scholar
7. Wu, M.C., IEEE Proceedings 85, 18331856 (1997)Google Scholar
8. Spearing, S.M., AIAA Journal 35, 16381644 (1997)Google Scholar
9. Beheim, G. and Salupo, C.S., MRS Proceedings 622 (2000)Google Scholar