Hostname: page-component-7c8c6479df-94d59 Total loading time: 0 Render date: 2024-03-29T04:56:46.523Z Has data issue: false hasContentIssue false

A Low-Temperature Process for Device Quality Si/SiO2 Interfaces on Si(111)

Published online by Cambridge University Press:  21 February 2011

T. Yasuda
Affiliation:
Departments of Physics, Materials Science and Engineering, and Electrical and Computer EngineeringNorth Carolina State University, Raleigh, NC 27695-8202
D. R. Lee
Affiliation:
Departments of Physics, Materials Science and Engineering, and Electrical and Computer EngineeringNorth Carolina State University, Raleigh, NC 27695-8202
C. H. Bjorkman
Affiliation:
Departments of Physics, Materials Science and Engineering, and Electrical and Computer EngineeringNorth Carolina State University, Raleigh, NC 27695-8202
Y. Ma
Affiliation:
Departments of Physics, Materials Science and Engineering, and Electrical and Computer EngineeringNorth Carolina State University, Raleigh, NC 27695-8202
G. Lucovsky
Affiliation:
Departments of Physics, Materials Science and Engineering, and Electrical and Computer EngineeringNorth Carolina State University, Raleigh, NC 27695-8202
U. Emmerichs
Affiliation:
Institute of Semiconductor Electronics II, Rheinisch-Westfalishe Technische Hochschule, 5100 Aachen, Germany
C. Meyer
Affiliation:
Institute of Semiconductor Electronics II, Rheinisch-Westfalishe Technische Hochschule, 5100 Aachen, Germany
K. Leo
Affiliation:
Institute of Semiconductor Electronics II, Rheinisch-Westfalishe Technische Hochschule, 5100 Aachen, Germany
H. Kurz
Affiliation:
Institute of Semiconductor Electronics II, Rheinisch-Westfalishe Technische Hochschule, 5100 Aachen, Germany
Get access

Abstract

Device-quality Si/SiO2 interfaces with an interface trap density as low as ∼2 × 1010cm−2 eV−1 were formed on Si( 111) surfaces by a low-temperature, two-step oxidation/deposition process using a remote plasma enhanced CVD system. The micromorphology of the initial Si(1 11) surface was changed i) by controlling the roughness of the initial Si surface through the pH of HF/NH4F treatments, and ii) by an introduction of surface steps using Si(111) wafers that were cut off the axis in the direction. When the Si wafer was subjected to a pre-deposition rinse in a 40 wt-% NH4F solution to develop an atomically smooth surface, the SiO2/Si(111) interface displayed a midgap interface trap density, Dit, of 2∼3 × 1010cm−2 eV−1 with Al as an electrode material. The Dit values increased systematically up to about 1 × 1011cm−2 eV−1 as the pH of the HF/NH4F treatment was decreased. The density of surface steps had a lesser effect on Dit. MOS capacitors with an n-type poly-Si electrode also showed Dit of ∼2 × 1010cm−2 eV−1. The effects of the hightemperature processing associated with poly-Si deposition and doping are discussed in conjunction with our recent study on second harmonic generation from the SiO2/Si interfaces.

Type
Research Article
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Higashi, G. S., Chabal, Y. J., Trucks, G. W., and Raghavachari, K., Appl. Phys. Lett., 56, 656 (1990); G. S. Higashi, R. S. Becker, Y. J. Chabal, and A. J. Becker, Appl. Phys. Lett., 58, 1656 (1991)Google Scholar
[2] For example, Yasaka, T., Kanda, K., Sawara, K., Miyazaki, S., and Hirose, M., Jpn. J. Appl. Phys., 30, 3567 (1991); H. Tokumoto, Y. Morita, and K. Miki, MRS Symp. Proc. 259, p. 409 (1992)Google Scholar
[3] Ohmi, T., Miyashita, M., Itano, M., Imaoka, T., and Kawanabe, I., IEEE Trans. Electron Devices, 39, 537 (1992)Google Scholar
[4] Watanabe, S., Nakayama, N., and Ito, T., Appl. Phys. Lett., 59, 1458 (1991); S. Watanabe and M Shigeno, Jpn. J. Appl. Phys., 31, 1702 (1992)Google Scholar
[5] Yasuda, T., Ma, Y., Habermehl, S., and Lucovsky, G., Appl. Phys. Lett., 60, 434(1992); T. Yasuda, Y. Ma, and G. Lucovsky, J. Vac. Sci. Technol. B10, 1844 (1992)Google Scholar
[6] Yasuda, T., Ma, Y., Chen, Y. L., Lucovsky, G., and Maher, D., to be published in J. Vac. Sci. Technol. A11, (1993)Google Scholar
[7] Nicollian, E. H. and Brews, J. R., MOS (Metal Oxide Semiconductor) Physics and Technology (Wiley, New York, 1982), p.222, 331, 784, 792 Google Scholar
[8] Schroder, D. K., Semiconductir material and Device Characterization (Wiley, New York, 1990), p.277 Google Scholar
[9] Wang, X. W. and Ma, T. P., Appl. Phys. Lett., 60, 2634 (1992)CrossRefGoogle Scholar
[10] Poindexter, E. H., Gerardi, G. J., Rueckel, M. -E., Caplan, P. J., Johnson, N. M., and Biegelsen, D. K., J. Appl. Phys., 56, 2844 (1984)CrossRefGoogle Scholar
[11] Bjorkman, C. H. and Lucovsky, G., unpublished dataGoogle Scholar
[12] Bjorkman, C. H., Yasuda, T., Shearon, C. E. Jr., Ma, Y., Lucovsky, G., Emmerichs, U., Meyer, C., Leo, K., and Kurz, H., to be published in J. Vac. Sci. Technol. B11 (1993)Google Scholar