Hostname: page-component-76fb5796d-2lccl Total loading time: 0 Render date: 2024-04-25T16:32:09.455Z Has data issue: false hasContentIssue false
  • English
  • Français

Local Structure of Indium-Plated Porous Silicon

Published online by Cambridge University Press:  15 February 2011

Toshimichi Ito ,
Takashi Ooiwa ,
Takanobu Nagao  and
Akimitsu Hatta
Toshimichi Ito
Affiliation:
Department of Electrical Engineering, Osaka University, Suita, Osaka 565, Japan, ito@pwr.eng.osaka-u.ac.jp
Takashi Ooiwa
Affiliation:
Department of Electrical Engineering, Osaka University, Suita, Osaka 565, Japan, ito@pwr.eng.osaka-u.ac.jp
Takanobu Nagao
Affiliation:
Department of Electrical Engineering, Osaka University, Suita, Osaka 565, Japan, ito@pwr.eng.osaka-u.ac.jp
Akimitsu Hatta
Affiliation:
Department of Electrical Engineering, Osaka University, Suita, Osaka 565, Japan, ito@pwr.eng.osaka-u.ac.jp
Get access

Abstract

The fine structure of porous silicon (PS) plated electro-chemically with indium at a low plating charge of 0.03 C/cm2 has been studied mainly using Rutherford backscattering spectrometry and a transmission electron microscope. The results obtained here show (1) that the amount of plated In atoms strongly depends on the oxidation states of the pore surfaces, (2) that the average In densities, the maximum of which is usually located near the PS - Si substrate interface, are typically larger than 1 % of the Si densities in the PS layers, and (3) that the plated In atoms are concentrated locally in pores larger in size. Two-step thermal oxidation of an In-plated PS specimen results in a structure of nm-sized Si crystallites surrounded mainly by Si oxide and In oxide.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 452 , 1996 , 485
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Canham, L.T., Appl. Phys. Lett. 57, 1046 (1990).Google Scholar
2. Mater. Res. Soc. Symp. Proc. 256, (1992); 283, (1993); 298, (1993); 358, (1995); J. Lumin. 57, (1993).Google Scholar
3.Ito, T. and Hiraki, A., J. Lumin. 57, 331 (1993).Google Scholar
4.Ito, T., Ohta, T. and Hiraki, A., Jpn. J. Appl. Phys. 31, L1 (1992).Google Scholar
5.Petrova-Koch, V., Muschik, M., Kuk, A., Meyer, B.K. and Koch, F., Appl. Phys. Lett. 61, 943 (1992).Google Scholar
6.Vial, J.C., Bsiesy, A., Gaspard, F., Herino, R., Ligeon, M., Muller, F. and Romestain, R., Phys. Rev. B 45, 14171 (1992).Google Scholar
7.Yamada, M. and Kondo, K., Jpn. J. Appl. Phys. 31, L993 (1992).Google Scholar
8.Ito, T., Motoi, K., Arakaki, O., Hatta, A. and Hiraki, A., Jpn. J. Appl. Phys. 33, L941 (1994).Google Scholar
9.Steiner, P., Kozlowski, F. and Lang, W., Jpn. J. Appl. Phys. 33, 6075 (1994).Google Scholar
10.Steiner, P., Kozlowski, F. and Lang, W., Mater. Res. Soc. Symp. Proc. 358, 665 (1995).Google Scholar
11.Ito, T., Yoneda, T., Furuta, K., Hatta, A. and Hiraki, A., Jpn. J. Appl. Phys. 34, L649 (1995).Google Scholar
12.Ito, T., Furuta, K., Yoneda, T., Arakaki, O., Hatta, A. and Hiraki, A., Mater. Res. Soc. Symp. Proc. 358, 477 (1995).Google Scholar