Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-23T15:24:46.261Z Has data issue: false hasContentIssue false
  • English
  • Français

Ion Assisted Reaction In Polymer And Ceramics

Published online by Cambridge University Press:  10 February 2011

S. K. Koh ,
S. C. Choi ,
S. Han.  and
H-J Jung
S. K. Koh
Affiliation:
Thin Film Technology Research Center, Korea Institute of Science and Technology, P. O. Box 131, CHEONGRYANG, SEOUL 130-650, KOREA
S. C. Choi
Affiliation:
Thin Film Technology Research Center, Korea Institute of Science and Technology, P. O. Box 131, CHEONGRYANG, SEOUL 130-650, KOREA
S. Han.
Affiliation:
Thin Film Technology Research Center, Korea Institute of Science and Technology, P. O. Box 131, CHEONGRYANG, SEOUL 130-650, KOREA
H-J Jung
Affiliation:
Thin Film Technology Research Center, Korea Institute of Science and Technology, P. O. Box 131, CHEONGRYANG, SEOUL 130-650, KOREA
Get access

Abstracr

Ion assisted reaction (IAR), which was firstly presented in 1995 MRS Fall meeting, has been reviewed for the surface modifications of polymer and ceramics. The reaction is assisted by energetic ions from 0.5 to 1.5 keV, doses 1014 to 1017 ions/cm2, and blowing rate of oxygen 0 ∼ 8 ml/min. Hydrophilic surfaces of polymers (wetting angle < 20° and surface energy 60 ∼ 70 erg/cm2) have been accomplished by the reaction, and an improvement of wettability and an increment of the surface energy are mainly due to the polar force and hydrophilic functional groups such as C=O, (C=O)-O, C-O, etc., without surface damage. The IAR was also applied on aluminum nitride in an O2 environment and AMON on AIN is formed by the Ar+ irradiation. The improvement of bond strength of Cu films on the AIN surface resulted from the interface bonds between Cu and the surface layers. Comparisons between the conventional surface treatments and the IAR are described in terms of physical bombardment, surface damage, functional group, and chain mobility in polymer.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 504: Symposium KK – Atomistic Mechanisms in Beam Synthesis & Irradiation… , 1997 , 431
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Callen, B. M., Ridge, M. L., Lahooti, S., Neumann, A. W., and Sohdi, R. N. S., J. Vac. Sci. Technol. A13, 2023 (1995).Google Scholar
2. Cho, J. S., Choi, W. K., Yoon, K. H., Jung, H. J., and Koh, S. K., J. Mater. Res. 12, 277 (1997).Google Scholar
3. Choi, W. K., Koh, S. K., and Jung, H. J., J. Vac. Sci. Technol. A14, 2366–2371 (1996).Google Scholar
4. Koh, S. K., Choi, W. K., Cho, J.S., Song, S. K., Kim, Y. M., and Jung, H-J., J. Mater. Res. 11, 2933 (1996).Google Scholar
5. Koh, S. K., Jung, H-J., Song, S. K., Choi, W. K., Yoon, Y. S., and Cho, J.S., USA patent, “Process for modifying surface of polymer, and polymer having surface modified by such process” 1996. 3. 19.Google Scholar
6. Lhoest, J-B., Dewez, J. L., and Bertrand, P., Nucl. Instrum. Methods B105, 322–327 (1995).Google Scholar
7. Schalek, R., Hlavacek, M., and Grunmmon, D. S., Mat. Res. Soc. Symp. Proc. 236, 335 (1992).Google Scholar
8. Adem, E. H., Bean, S. J., Demanet, C. M., Moel, A. Le, and Duraud., J. P. Nucl. Instrum. Methods B32, 182 (1988).Google Scholar