Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-26T02:41:55.639Z Has data issue: false hasContentIssue false
  • English
  • Français

In-Situ Pulsed Laser Deposition of High-TC Yba2Cu3O7 Superconducting Thin Films on (100) LaAlO3 Substrates

Published online by Cambridge University Press:  28 February 2011

P. Tiwari ,
S. Sharan ,
R. K. Singh ,
O. W. Holland  and
J. Narayan
P. Tiwari
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, NC 27695‐7916
S. Sharan
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, NC 27695‐7916
R. K. Singh
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, NC 27695‐7916
O. W. Holland
Affiliation:
Solid State DivisionOak Ridge National LaboratoryOakRidge, TN 37831
J. Narayan
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, NC 27695‐7916
Get access

Abstract

The formation of superconducting thin films on lanthanum aluminate substrates is very important for high‐frequency applications. In this paper, we discuss the fabrication of epitaxial superconducting YBa2Cu3O7 thin films on (100)LaAlO3 substrates, which exhibit excellent dielectric properties required for high frequency applications. The films were deposited by the biased pulsed laser evaporation technique (PLE) at substrate temperatures between 500‐650°C and exhibit excellent crystallinity with best minimum ion channeling yields corresponding to approximately 3%. The superconducting transition temperatures varied from 88‐92 K with critical current densities at 77K and zero magnetic field greater than 4 ‐ 5 x 106 Amps/cm2.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 169: Symposium M – High Temperature Superconductors: Fundamental Properties and Novel Materials Processing , 1989 , 451
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Singh, R. K., Narayan, J., Singh, A. K., and Krishnaswamy, J., Appl. Phys. Lett., 54, 2271 (1989)Google Scholar
2 Sandstrom, R.L., Giess, E.A., Gallagher, W. J., Segmuller, A., Cooper, E. I., Chisholm, M. F., Gupta, A., Shinde, S., and Laibowitz, R. B., Appl. Phys. Lett., 53, 1874 (1988)Google Scholar
3 Mogro‐Campero, A., Turner, L. G., Hall, E. L., Garbauskas, M. F. and Lewis, N., Appl. Phys. Lett., 54, 2719 (1989)Google Scholar
4 Roas, B., Schultz, L. and Endres, G. Appl. Phys. Lett., 53, 1557 (1988)Google Scholar
5 Inam, A., Hedge, M. S., Wu, X. D., Venkatesan, T., Chang, C. C., Chase, E. W., Barboux, P., Tarascon, J. M., and Wilkens, B., Appl. Phys. Lett., 52, 754 (1988)Google Scholar
6 Witanachchi, S., Kwok, H. S., Wang, X. W., and Shaw, D. T., Appl. Phys. Lett., 53, 234 (1988)Google Scholar
7 Lee, C. B., Singh, R. K. and Narayan, J., these proceedings.Google Scholar