Hostname: page-component-76fb5796d-9pm4c Total loading time: 0 Render date: 2024-04-25T08:52:20.024Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of Pre-Oxidation of an Ir Film on Chemical Composition and Crystal Property of a PZT Film Deposited on the Ir Film by Sputtering

Published online by Cambridge University Press:  28 July 2011

Susumu Horita  and
Makoto Shoga
Susumu Horita
Affiliation:
Japan Advanced Institute of Science and Technology, 1-1, Asahidai, Tatsunokuchi, Ishikawa, JAPAN
Makoto Shoga
Affiliation:
Japan Advanced Institute of Science and Technology, 1-1, Asahidai, Tatsunokuchi, Ishikawa, JAPAN
Get access

Abstract

We investigated the influence of pre-oxidation of an Ir film as a bottom electrode on the chemical composition and crystal property of the PZT film deposited on it by RF sputtering, changing the sputtering target composition ratio Zr/Ti to be 20/80, 52/48 or 80/20. The Ir film deposited on a thermally oxidized Si substrate was pre-oxidized at 600°C for 20 min in the O2 gas of 10 Pa. The XRD patterns showed a strong PbO(101) peak from the PZT film on the oxidized Ir film for Zr/Ti = 52/48, but no PbO peak from the film on a no oxidized Ir film. The RBS measurement showed that the film composition ratio of Pb/(Zr+Ti) on the pre-oxidized Ir film was much larger than that on the no oxidized Ir film. For Zr/Ti=20/80, the same tendency was observed. However, for Zr/Ti=80/20, the chemical composition of the PZT film on the pre-oxidized Ir film was almost equal to that without oxidation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 811: Symposia D/E – Integration of Advanced Micro-and Nanelectronic Devices-Critical Issues and Solutions , 2004 , D3.18
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Nakamura, T., Nakao, Y., Kamisawa, A. and Takasu, H., Jpn. J. Appl. Phys. 33, 5207 (1994).Google Scholar
2. Nakamura, T., Nakao, Y., Kamisawa, A. and Takasu, H., Jpn. J. Appl. Phys. 34, 5184 (1995).Google Scholar
3. Fujisawa, A., Furihata, M., Minemura, I., Onuma, Y. and Fukami, T., Jpn. J. Appl. Phys. 32, 4048 (1993).Google Scholar
4. Hase, T., Hirata, K., Amanuma, K., Hosokawa, N. and Miyasaka, Y., Jpn. J. Appl. Phys. 33, 5244 (1994).Google Scholar
5. Lee, K. B., Tirumala, S. and Desu, S. B., Appl. Phys. Lett. 74, 1484 (1999).Google Scholar
6. Saenger, K. L., Grill, A., Shaw, T. M., Neumayer, D. A., Lin, C. and Wang, Y. Y. in Ferroelectric Thin Films VII, edited by Jones, R. E., Schwartz, R. W., Summerfelt, S. R. and Yoo, I. K., (Mater. Res. Soc. Proc. 541, Pittsburgh, PA, 1999) pp.119–127.Google Scholar
7. Lide, D. R. in Handbook of Chemistry and Physics, (CRC Press, Boca Raton, FL. 74th edn., 1993) pp. 5–21.Google Scholar