Hostname: page-component-7c8c6479df-24hb2 Total loading time: 0 Render date: 2024-03-28T08:52:34.583Z Has data issue: false hasContentIssue false

Finite Element Analysis of Thermal-Mechanical Stress Induced Failure in Interconnects

Published online by Cambridge University Press:  15 February 2011

X. Yu
Affiliation:
Institut für Halbleitertechnologie und Werkstoffe der Elektrotechnik, Universität Hannover, Appelstrasse 11 A, 30167 Hannover, Germany
K. Weide
Affiliation:
Laboratorium für Informationstechnologie, Universität Hannover, Schneiderberg 32, 30167 Hannover, Germany
Get access

Abstract

In this work a study of the nature as well as an evalution of the thermal-mechanical stress in aluminum interconnects was carried out. A theoretical model discribes the atom flux which can be induced by the relaxation of the stress. Based on this theory an algorithm has been developed and integrated into the finite element simulation software. This algorithm allows the calculation of the mass flux divergence and prediction of the failure location before the damage occurs. For the verification of this algorithm an aluminum pad structure sputtered on thermal oxide layer was used. The failure location was correlated with in situ observation during the long term stress tests. Experimental results confirm that the observed structure degradations correspond with the simulations very well.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lloyd, J. R., Semicond. Sci. Technol. 12 (1997) 11701185.Google Scholar
2. Gleixer, R. J., Nix, W. D., Journal of applied physics, Volume 83, (1998), pp. 35953599.Google Scholar
3. Park, Y. J., Thompson, C. V., Journal of applied physics, Volume 82, (1997), pp. 42774281.Google Scholar
4. Rzepka, S., Korhonen, M. A., Weber, E. R. and Li, C., 1997 MRS Spring Meeting, (1997).Google Scholar
5. ANSYS, SAS IP Inc., Houston Texas, USA.Google Scholar
6. Lau, J. H., Thermal stress and strain in microelectronic packaging, edited by Lau, J. H. (Van Nostrand Reinhold, New York, 1993).Google Scholar
7. Weide, K., Yu, X., Quintard, V., Proceeding of the 7th ESREF (1995), pp. 241246.Google Scholar
8. Yu, X., Weide, K., Microelectronics and reliability, Volume 37, (1997), pp. 15451548.Google Scholar