Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-23T06:34:20.375Z Has data issue: false hasContentIssue false
  • English
  • Français

Film Synthesis on Powders by Cathodic ARC Plasma Deposition

Published online by Cambridge University Press:  21 February 2011

André Anders ,
Simone Anders ,
Ian G. Brown  and
Igor C. Ivanov
Simone Anders
Affiliation:
Lawrence Berkeley Laboratory, University of California, Berkeley, CA 94720
Ian G. Brown
Affiliation:
Lawrence Berkeley Laboratory, University of California, Berkeley, CA 94720
Igor C. Ivanov
Affiliation:
Charles Evans & associates, 301 Chesapeake Drive, Redwood City, CA 94063
Get access

Abstract

Cathodic arc plasma deposition was used to coat Al2O3 powder (mesh size 60) with platinum. the power particles were moved during deposition using a mechanical system operating at a resonance frequency of 20 Hz. Scanning electron microscopy and auger electron microscopy show that all particles are completely coated with a platinum film having a thickness of about 100 nm. the actual deposition time was only 20 s, thus the deposition rate was very high (5 nm/s).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 388: Symposium Q – Film Synthesis and Growth Using Energetic Beams , 1995 , 215
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Powell, C. F., Oxley, J. H., and Blocher, J. M. Jr., Vapour Deposition, (Wiley, New York, 1966).Google Scholar
2 Itoh, H., Hattoria, K. and Naka, S., J. Mater. Sci. 24, 3643 (1989).Google Scholar
3 Khan, H. R. and Frey, H., J. of the Less-Common Metals 175, 177 (1991).Google Scholar
4 Garg, A. K. and De Jonghe, L. C., J. Mater. Res. 5, 136 (1990).Google Scholar
5 Kim, W.-J., Moon, Y. T., Kim, C. H., Kim, D. K., Lee, H.-W., J. Mater. Sci. Lett. 13, 1349 (1994).Google Scholar
6 Lafferty, J. M. (Editor), Vacuum arcs, (Wiley interscience, New York, 1980).Google Scholar
7 Jüttner, B., IEEE Trans. Plasma Sci. 15, 474 (1987).Google Scholar
8 Mesyats, G. A. and Proskurovsky, D. I., Pulsed Electrical Discharge in Vacuum, (Springer,Berlin, 1989).Google Scholar
9 Anders, A., Anders, S., Jüttner, B., Bötticher, W., Lück, H., and Schröder, G., IEEE Trans.Plasma Sci. 20, 466 (1992).Google Scholar
10 Martin, P. J., Netterfield, R. P., and Kinder, T. J., Thin Solid Films 193, 77 (1990).Google Scholar
11 Bendavid, A., Martin, P. J., Netterfield, R. P., and Kinder, T. J., Surface and Coatings Technology 70, 97 (1994).Google Scholar
12 McKenzie, D. R., Muller, D., Pailthorpe, B. A., Wang, Z. H., Kravtchinskaya, E., Segal, D., Lukins, P. B., Swift, P. D., Martin, P. J., Amaratunga, G., Gaskell, P. H., and Saeed, A., Diamond and Related Materials 1, 51 (1991).Google Scholar
13 Lossy, R., Pappas, D. L., Roy, R. A., Cuomo, J. J., and Sura, V. M., Appl. Phys. Lett. 61,171 (1992).Google Scholar
14 Aksenov, I. I., Vakula, S. I., Padalka, V. G., Strel'nitskii, V. E., and Khoroshikh, V. M., Zhurn. Tekh. Fiz. 50, 2000 (1980); Sov. Phys.-Tech. Phys. 25, 1164 (1980).Google Scholar
15 Anders, A., Anders, S., and Brown, I. G., Plasma Sources Sci. & Technol. 4, 1 (1995).Google Scholar
16 Boxman, R. L. and Goldsmith, S., Surface Coatings Technol. 52, 39 (1992).Google Scholar
17 Anders, A., Anders, S., Brown, I. G., Mat. Res. Soc. Symp. Proc. 316, 833 (1994).Google Scholar
18 Brown, I. G., Anders, A., Anders, S., Castro, R. A., Dickinson, M. R., MacGill, R. A., and Wang, Z., presented at the Ninth international Conference on Ion Beam Modification of Materials, Canberra, Australia, 1995 (unpublished).Google Scholar
19 MacGill, R. A., Anders, S., Anders, A., Castro, R. A., Dickinson, M. R., Yu, K. M., and Brown, I. G., Surface Coatings Technol. (1995) accepted for publication.Google Scholar
20 Biersack, J. P., Berg, S., and Nender, C., Nucl. INstrum. Meth. Phys. Res. B59/60, 21 (1991).Google Scholar