Hostname: page-component-8448b6f56d-tj2md Total loading time: 0 Render date: 2024-04-20T04:17:57.267Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Discrete Track Media with Patterned Servo-areas and Tracks on Disk Substrate

Published online by Cambridge University Press:  26 February 2011

Yuko Tsuchiya ,
Kenichi Ito ,
Chiseki Haginoya  and
Yoshiyuki Hirayama
Yuko Tsuchiya
Affiliation:
yuko.tsuchiya.yq@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan, +81-42-323-1111, +81-42-327-7709
Kenichi Ito
Affiliation:
kenichi.ito.xm@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan
Chiseki Haginoya
Affiliation:
chiseki.haginoya.yb@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan
Yoshiyuki Hirayama
Affiliation:
yoshiyuki.hirayama.ec@hitachi.com, Hitachi, Ltd., Central Research Laboratory, Magnetic Drive Technology Research Department, 1-280, Higashi-Koigakubo, Kokubunji, 1858601, Japan
Get access

Abstract

Discrete track media (DTM) with patterned servo-areas and recording tracks were fabricated on disk substrates in a two-step RIE process, creating a fine pattern transfer from an imprinted resist mask to a substrate surface without variations in groove depth. The fabricated DTM with perpendicular magnetic recording layers flew stably during read out signal detection.

Keywords

lithography (removal)reactive ion etchingmagnetic
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1032: Symposium I – Nanoscale Magnetic Materials and Applications , 2007 , 1032-I05-07
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lambert, S. E. Sanders, I. L. Patlach, A. M. Krounbi, M. T. and Hetzler, S. R. J. Apply. Phys. 69, 4727 (1991)10.1063/1.348260Google Scholar
2. Albrecht, M., Ganesan, S., Rettner, C. T. Moser, A., Best, M. E. White, R. L. and Terris, B. D. IEEE Trans. Magn. 39, 2323 (2003)10.1109/TMAG.2003.816285Google Scholar
3. Kikitsu, A., Kamata, Y., Sakurai, M., and Naito, K., IEEE Trans. Magn. 43, 3685 (2007)10.1109/TMAG.2007.902970Google Scholar
4. Soeno, Y., Moriya, M., Ito, K., Hattori, K., Kaizu, A., Aoyama, T., Matsuzaki, M., and Sakai, H., IEEE Trans. Magn. 39, 1967 (2003)10.1109/TMAG.2003.813753Google Scholar
5. Wachenschwanz, D., Jiang, W., Roddick, E., Homola, A., Dorsey, P., Harper, B., Treves, D., Bajorek, andC., IEEE Trans. Magn. 41, 670, (2005)10.1109/TMAG.2004.838049Google Scholar
6. Moneck, M. T. Zhu, J-G., Che, X., Tang, Y., Lee, H. J. Zhang, S., Moon, K-S., and Takahashi, N., IEEE Trans. Magn. 43, 2127, (2007)10.1109/TMAG.2007.893706Google Scholar