Hostname: page-component-848d4c4894-v5vhk Total loading time: 0 Render date: 2024-06-25T07:24:07.754Z Has data issue: false hasContentIssue false

Enhanced Degradation in P+-Poly PMOSFETs With Oxynitride Gate Dielectrics Under Hot-Hole Injection

Published online by Cambridge University Press:  10 February 2011

Y. Y. Chen
Affiliation:
Microelectronics Research Center, Department of Electrical and Computer EngineeringThe University of Texas, Austin, TX 78712, (512) 471-1016, yc10@mail.utexas.edu
M. Gardner
Affiliation:
Advanced Micro Devices, Austin, TX 78741
J. Fulford
Affiliation:
Advanced Micro Devices, Austin, TX 78741
D. Wristers
Affiliation:
Advanced Micro Devices, Austin, TX 78741
A. B. Joshi
Affiliation:
Conexant Systems Inc., Newport Beach, CA 92658
D. L. Kwong
Affiliation:
Microelectronics Research Center, Department of Electrical and Computer EngineeringThe University of Texas, Austin, TX 78712, (512) 471-1016, yc10@mail.utexas.edu
Get access

Abstract

In this paper, a significant degradation under hot hole injection is observed in P+ -poly PMOSFETs with oxynitride gate dielectrics. In our study, both oxynitrides formed by gate oxide grown on Nitrogen Implanted Si Substrates (NISS) and NO-annealed SiO2 oxynitride gate dielectrics are used and compared to control SiO2 gate dielectrics of identical thicknesses. A physical model responsible for such enhanced degradation in PMOSFETs with oxynitride gate dielectric is proposed. It is shown that the hole injection barrier lowering as a result of the nitrogen-rich layer at the SiO2/Si interface in oxynitride is responsible for such enhanced degradation.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Chen, Y. Y., Liu, I. M., Gardner, M., Fulford, J., and Kwong, D. L., “Performance and reliability assessment of dual-gate CMOS devices with gate oxide grown on nitrogen implanted Si substrates,” IEDM Tech. Dig., pp. 639642, 1997.Google Scholar
[2] Liu, C. T., Lloyd, E. J., Ma, Yi, Du, M., Opila, R. L., and Hillenius, S. J., “High performance 0.2 μm CMOS with 25 Å gate oxide grown on nitrogen implanted Si substrates,” IEDM Tech. Dig., pp. 499502, 1996.Google Scholar
[3] Bhat, M., Kim, J., Yan, J., Woon, G. W., Han, L. K., and Kwong, D. L., “MOS Characteristics of Ultrathin NO-Grown oxynitrides,” IEEE Electron Device Letters, vol. 15, p. 421, 1994.10.1109/55.320988Google Scholar
[4] Han, L. K., Wristers, D., Yan, J., Bhat, M., and Kwong, D. L., “Highly Suppressed Boron Penetration in SiO2 for P+-Polysilicon Gated MOS Device Applications,” IEEE Electron Device Letters, vol. 16, p. 319, 1995.10.1109/55.388720Google Scholar
[5] Han, L. K., Crowder, S., Hargrove, M., Lo, S. H., Guarin, F., Crabbe, E., and Su, L., “Electrical characteristics and reliability of sub-3 nm gate oxides grown on nitrogen implanted silicon substrates,” IEDM Tech. Dig., pp. 643646, 1997.Google Scholar
[6] Campbell, S. A., Gilmer, D. C., Wang, X. C., Hsieh, M. T., Kim, H. S., Gladfelter, W. L., and Yan, J., “MOSFET transistors fabricated with high permitivity TiO2 ,” IEEE Trans. Electron Device, vol. ED–44, p. 104, January 1997.10.1109/16.554800Google Scholar
[7] Guo, X. and Ma, T. P., “Tunneling leakage current in oxynitride: dependence on oxygen/nitrogen content,” IEEE Electron Device Letters, Vol. 19, No. 6, p. 207, 1998.Google Scholar