Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-25T05:25:44.562Z Has data issue: false hasContentIssue false
  • English
  • Français

Drastic Change in the Gan Film Quality by In-Situ Controlling Surface Reconstructions In Gsmbe

Published online by Cambridge University Press:  10 February 2011

X. Q. Shen ,
S. Tanaka ,
S. Iwai  and
Y. Aoyagi
X. Q. Shen
Affiliation:
sxq@postmaTiken.go.jp
S. Tanaka
Affiliation:
The Institute of Physical and Chemical Research (RIKEN), Hirosawa 2-1, Wako-Shi, Saitama, 351-01 Japan
S. Iwai
Affiliation:
The Institute of Physical and Chemical Research (RIKEN), Hirosawa 2-1, Wako-Shi, Saitama, 351-01 Japan
Y. Aoyagi
Affiliation:
The Institute of Physical and Chemical Research (RIKEN), Hirosawa 2-1, Wako-Shi, Saitama, 351-01 Japan
Get access

Abstract

GaN growth was performed on 6H-SiC (0001) substrates by gas-source molecular beam epitaxy (GSMBE), using ammonia (NH3) as a nitrogen source. Two kinds of reflection high-energy electron diffraction (RHEED) patterns, named (1×1) and (2×2), were observed during the GaN growth depending on the growth conditions. By careful RHEED study, it was verified that the (1×1) pattern was corresponded to a H2-related nitrogen-rich surface, while (2×2) pattern was resulted from a Ga-rich surface. By x-ray diffraction (XRD), photoluminescence (PL) and atomic force microscopy (AFM) characterizations, it was found that the GaN quality changed drastically grown under different RHEED patterns. GaN film grown under the (1×1) RHEED pattern showed much better qualities than that grown under the (2×2) one.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 482 , 1997 , 223
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Strite, S. and Morkoc, I-I., J. Vac. Sci Technol B 10, 1237 (1992) and references therein.Google Scholar
2. Nakamura, S., Senoh, M., Nagahama, S., Iwasa, N., Yamada, T., Matsushita, T., Sugimoto, Y. and Kiyoku, H., AppL Phys. Lett. 70, 1417 (1997) and the references therein.Google Scholar
3. Lin, M.E., Sverdlov, B., Zhou, G.L. and Morkoc, H., AppL Phys. Lett. 62, 3479 (1993).Google Scholar
4. Korakakis, D., Sampath, A., Ng, H.M., Morales, G., Goepfert, I.D. and Moustakas, T.D., Mat. Res. Soc. Symp. Proc. VoL395, 151 (1996).Google Scholar
5. Kamp, M., Mayer, M., Pelzmann, A., Thies, A., Chung, H.Y., Stemschulte, H., Marti, O. and Ebeling, K.J., Mat. Res. Soc. Symp. Proc. VoL395, 135 (1996).Google Scholar
6. Yang, Z., KLi, L. and Wang, W.I., Appk Phys. Lett. 67,1686 (1995).Google Scholar
7. Hacke, P., Feuillet, G., Okumura, H. and Yoshida, S., Appl. Phys. Lett. 69, 2507 (1996).Google Scholar