Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-23T23:45:43.095Z Has data issue: false hasContentIssue false
  • English
  • Français

Comb-Like Polymer Thin Films Prepared by Ionization-Assisted Deposition of Acrylate Compounds

Published online by Cambridge University Press:  11 February 2011

Hiroaki Usui ,
Atsuhiro Katayama ,
Takanobu Honda  and
Kuniaki Tanaka
Hiroaki Usui
Affiliation:
Department of Material Systems Engineering, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184–8588, JAPAN
Atsuhiro Katayama
Affiliation:
Department of Material Systems Engineering, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184–8588, JAPAN
Takanobu Honda
Affiliation:
Department of Material Systems Engineering, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184–8588, JAPAN
Kuniaki Tanaka
Affiliation:
Department of Material Systems Engineering, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184–8588, JAPAN
Get access

Abstract

Alkylacrylate compounds were deposited by the ionization-assisted deposition (IAD) method to form thin films of comb-like polymers having long alkyl side chains on the vinyl polymer backbone. From the source material of n-octadecyl acrylate, polymer thin films having average molecular weight of 6000 were obtained at the polymer yield of 45 to 65%. For the preparation of fluorinated polymer thin films, 1H, 1H, 11H-eicosafluoroundecyl acrylate was used as the source material. Although the conventional evaporation method could not accumulate any films with this material, the IAD was able to produce insoluble thin films that have large contact angle against water droplet. In either material, the polymerization reaction was enhanced with increasing electron emission current for IAD. These results indicate that the IAD enables the preparation of thin polymer coatings that have polyethylene or Teflon-like properties without using the solvents.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 734: Symposia A/B – Defect-Mediated Phenomena in Ordered Polymers – Polymer/Metal Interfaces and Defect Mediated Phenomena in Ordered Polymers , 2002 , B9.46
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Usui, H., Thin Solid Films 365, 22 (2000).CrossRefGoogle Scholar
2. Usui, H., IEICE Trans. Electronl. E83–C, 1128 (2000).Google Scholar
3. Usui, H., Yamada, I. and Takagi, T., J. Vac. Sci. Technol. A4, 52 (1986).CrossRefGoogle Scholar
4. Usui, H., Kameda, H. and Tanaka, K., Thin Solid Films 288, 229 (1996).CrossRefGoogle Scholar
5. Nason, T. C., Moore, J. A. and Lu, T.-M., Appl. Phys. Lett. 60, 1866 (1992).CrossRefGoogle Scholar
6. Usui, H., Koshikawa, H. and Tanaka, K., J. Vac. Sci. Technol. A13, 2318 (1995).CrossRefGoogle Scholar