Hostname: page-component-7bb8b95d7b-lvwk9 Total loading time: 0 Render date: 2024-09-11T22:25:19.883Z Has data issue: false hasContentIssue false

The Characterization of Nitrogen Implanted WC/Co

Published online by Cambridge University Press:  25 February 2011

Daniel W. Oblas*
Affiliation:
Gte Laboratories Incorporated, Waltham Massachusetts, 02254, USA
Get access

Abstract

Although the mechanical properties of nitrogen implanted cemented carbides show significant improvements in performance over unimplanted specimen, the chemical or physical mechanisms giving rise to these improvements are not well understood. Furthermore, the mechanical properties of the implanted samples under thermal stress may not be stable. This study presents analytical results obtained for a series of nitrogen implanted cemented carbides that were subsequently characterized by Auger Electron Spectrometry (AES) and Thermal Desorption Mass Spectrometry (TDMS). Results show that, in the fluence range of 0.5 to 2.5×1017 N2/cm2, peak nitrogen concentration is linear and reaches a maximum concentration of 25 a/o for the highest fluence and 180 keY energy. During vacuum heating, the implanted nitrogen is evolved rapidly between 600–700°C, which corresponds to an activation energy of approximately 7 kcal/mole (.30 ev). A small quantity of nitrogen is still present after heating to 1000°C, at an estimated average concentration of 3 a/o with little diffusional broadening as a result of post-implant heating.

Type
Research Article
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

(1) Dearnaley, G., Radiation Effects, 63, 1, 1982.Google Scholar
(2) LoRusso, S., Mazzoldi, P., Scotoni, I., Tosella, C. and Tosto, S., Appl. Phys. Lett., 34, No10, 627, 1979.Google Scholar
(3) Kelly, R., J. Vac. Sci. & Tech., 21, No3, 778, 1982.Google Scholar
(4) Greggi, J. and Kossowsky, R., International Conference on the Science of Hard Materials, Wyoming, August 1982.Google Scholar
(5) Greggi, J., Scripta Metallurgica, 17, 765, 1983.Google Scholar
(6) Kolitsch, A. and Richter, E., Crystal Res. and Tech., 18, K5K7, 1983.Google Scholar
(7) Baron, M., Chang, A., Schreurs, J. and Kossowsky, R., Nuclear Instr. and Meth., 182/183, 531, 1981.Google Scholar
(8) Manning, I. and Mueller, G.P., Computer Physics Communications, 7, 85, 1974.Google Scholar
(9) Jayaram, V. and Sinclair, R., J. Amer. Ceramics Soc., In press.Google Scholar
(10) Guglielmi, M., Oliana, A. and Tosto, S., Appl. of Surf. Sci., 10, 466, 1982.Google Scholar