Hostname: page-component-84b7d79bbc-lrf7s Total loading time: 0 Render date: 2024-07-30T15:05:46.578Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of a Solid-Source Delivery System for Metal Organic Chemical Vapor Deposition by In-Situ Laser Reflectance

Published online by Cambridge University Press:  10 February 2011

C. Dubourdieu ,
G. Y. Kim ,
J. D. Meyer  and
B. Gallois
C. Dubourdieu
Affiliation:
Stevens Institute of Technology, Department of Materials Science and Engineering, Hoboken NJ 07030
G. Y. Kim
Affiliation:
Stevens Institute of Technology, Department of Materials Science and Engineering, Hoboken NJ 07030
J. D. Meyer
Affiliation:
Stevens Institute of Technology, Department of Materials Science and Engineering, Hoboken NJ 07030
B. Gallois
Affiliation:
Stevens Institute of Technology, Department of Materials Science and Engineering, Hoboken NJ 07030
Get access

Abstract

Specular laser reflectance (He-Ne laser) has been used to monitor in-situ and in real time the growth rate and the index of refraction of oxide films during chemical vapor deposition. This technique has been implemented on an inverted vertical stagnation-flow reactor equipped with a solid-source delivery system. Yttria deposited on silicon has been chosen as a starting material to characterize the reactor and the precursor delivery system capabilities. The experimental reflectance curves have been fitted to a simple three-layer (gas/film/substrate) model allowing the determination of the growth rate and of the refractive index. The growth rate has been studied as a function of various key processing parameters: the source feeding rate, the powder packing density, the oxygen partial pressure and the total pressure. The change in reflectivity has also been recorded during pulsed-delivery growth. Nanometer-scale resolution is obtained which demonstrates that this method can be extended to the study of multilayer oxide structures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 502: Symposium II – In Situ Process Diagnostics & Intelligent Materials Processing , 1997 , 89
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. SpringThorpe, and Majeed, A., J. Vac. Sci. Technol. B 8 (2), p. 266, (1990)Google Scholar
2. Sankur, , Southwell, W. and Hall, R., Journal of Electronic Materials 20 (12), p. 1099 (1991).Google Scholar
3. Farrell, , Armstrong, J. V., and Kightley, P., Appl. Phys. Lett. 59 (10), p. 1203 (1991).Google Scholar
4. Dietz, , Miller, A., Bachmann, K. J., J. Vac. Sci. Technol. A 13 (1), p. 153 (1995).Google Scholar
5. Bajaj, , Irvine, S. J. C., Sankur, H. O., Svoronos, S. A., Journal of Electronic Materials 22, p. 899 (1993).Google Scholar
6. Hiskes, , DiCarolis, S. A., Young, J. L., Laderman, S. S., Jacowitz, R. D. and Taber, R. C., Appl. Phys. Lett. 59 (5), p. 606 (1991).Google Scholar
7. Nigara, Y., Jpn. J. Appl. Phys. 7 (4), p. 404 (1968).Google Scholar
8. Kanehori, , Sughii, N., Fukazawa, T., and Miyauchi, K., Thin Solid Films 182, p. 265 (1989).Google Scholar
9. Dubourdieu, , PhD thesis, Université Joseph Fourier, Grenoble, 1995.Google Scholar
10. Yang, , Abeles, B., and Persans, P. D., Appl. Phys. Lett. 49 (11), p. 631 (1986).Google Scholar