Hostname: page-component-76fb5796d-9pm4c Total loading time: 0 Render date: 2024-04-25T09:56:29.823Z Has data issue: false hasContentIssue false
  • English
  • Français

Characteristics of Microwave Absorption of Ni-Zn-Ferrite/Sic Hemi-Crystallized Composites

Published online by Cambridge University Press:  18 March 2011

Makoto Nakanishi ,
Tomonori Shibuya ,
Tatsuo Fujii  and
Jun Takada
Makoto Nakanishi
Affiliation:
Department of Applied Chemistry, Okayama University, Tsushima-naka 3-1-1, Okayama 700-8530, Japan
Tomonori Shibuya
Affiliation:
Department of Applied Chemistry, Okayama University, Tsushima-naka 3-1-1, Okayama 700-8530, Japan
Tatsuo Fujii
Affiliation:
Department of Applied Chemistry, Okayama University, Tsushima-naka 3-1-1, Okayama 700-8530, Japan
Jun Takada
Affiliation:
Department of Applied Chemistry, Okayama University, Tsushima-naka 3-1-1, Okayama 700-8530, Japan
Get access

Abstract

In order to develop wide-band microwave absorbers we tried to prepare composite absorbers between the magnetic loss (Ni-Zn-ferrite) and the dielectric loss (SiC) materials. The dry or wet mixtures of Ni-Zn-ferrite and polycarbosilane (PCS) were cured in air and were then subjected to pyrolysis forming of the ferrite composites. The composites produced by the wet mixing had granular structure: the PCS surrounding the ferrite particles suppressed the sintering and the grain growth of the ferrite composites during pyrolysis. The matching frequency due to the magnetic loss linearly increased with increasing the PCS content. Moreover the ferrite/SiC hemi-crystallized composite cured at 473 K for 24 hours showed wide-band absorption spectrum having the both magnetic and dielectric losses.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 656: Symposium DD – Materials Issues for Tunable RF and Microwave Devices II , 2000 , DD4.4
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tsutaoka, T., Nakamura, T., and Hatakeyama, K., J. Appl. Phys. 82, 3068 (1997).Google Scholar
2. Chauvet, O., Stoto, T., and Zuppiroli, L., Phys. Rev. B 46, 8139 (1992).Google Scholar
3. Mouchon, E. and Colomban, Ph., J. Mater. Sci. 31, 323 (1996).Google Scholar
4. Yamamoto, T., Chino, M., Tanaka, R., Ueyama, T., and Okazaki, K., Ferroelectrics 95, 175 (1989).Google Scholar
5. Che, R., Li, Y., Chen, Z., and Lin, H., J. Mater. Sci. Lett. 18, 1963 (1999).Google Scholar
6. Takeda, M., Imai, Y., Ichikawa, H., Kasai, N., Seguchi, T., and Okamura, K., Composites Sci. Technol. 59, 793 (1999).Google Scholar
7. Matthews, S., Edirisinghe, M. J., and Folkes, M. J., Ceram. International 25, 49 (1999).Google Scholar
8. Smit, J. and Wijn, H. P. J., Ferrites (Phillips Technical Library, Eindhoven, 1959) p. 243.Google Scholar