Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-24T03:57:40.928Z Has data issue: false hasContentIssue false
  • English
  • Français

Aerosol Deposition Method (Adm) For Nano-Crystal Ceramics Coating Without Firing

Published online by Cambridge University Press:  10 February 2011

Jun Akedo ,
Maxim Lebedev ,
Atsushi Iwata ,
Hisato Ogiso  and
Shizuka Nakano
Jun Akedo
Affiliation:
National Institute of Advanced Industrial Science and Technology, Namiki 1-2-1 Tsukuba Ibaraki, 305-8564 Japan
Maxim Lebedev
Affiliation:
National Institute of Advanced Industrial Science and Technology, Namiki 1-2-1 Tsukuba Ibaraki, 305-8564 Japan
Atsushi Iwata
Affiliation:
National Institute of Advanced Industrial Science and Technology, Namiki 1-2-1 Tsukuba Ibaraki, 305-8564 Japan
Hisato Ogiso
Affiliation:
National Institute of Advanced Industrial Science and Technology, Namiki 1-2-1 Tsukuba Ibaraki, 305-8564 Japan
Shizuka Nakano
Affiliation:
National Institute of Advanced Industrial Science and Technology, Namiki 1-2-1 Tsukuba Ibaraki, 305-8564 Japan
Get access

Abstract

Aerosol deposition method (ADM) for shock-consolidation of fine ceramics powder to form dense and hard layers is reported. Submicron ceramic particles were accelerated by gas flow in the nozzle up to velocity of several hundred m/s. During interaction with substrate, these particles formed thick (10 ∼ 100 μm), dense, uniform and hard ceramics layers. Experiments were fulfilled at room temperature. The results of fabrications, microstructure and mechanical properties of oxides (Al2O3; (Ni,Zn)Fe2O3; Pb(Zr0.52,Ti0.48)O3 and non-oxide (AlN; MgB2) materials are presented. Every layer has polycrystalline structure with nano-meter order scale.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 778: Symposium U – Mechanical Properties Derived from Nanostructuring Materials , 2003 , U8.10/W7.10
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ide, T., Mori, Y., Konda, I., Ikawa, N. and Yagi, H., J. Jpn. Soc. Prec. Eng. 57, 143 (1991) [in Japanese].Google Scholar
2. Kasyu, S., Fuchita, E., Manabe, T., and Hayashi, C., Jpn. J. Appl. Phys. 23, L910 (1984)Google Scholar
3. Hayashi, C., Kashu, S., Oda, M. and Naruse, F., Mater. Sci. Eng. A163, 157 (1993)Google Scholar
4. Dykhuizen, R.C. and Smith, M.F., J. Therm Spray Technol. 7, 205 (1998)Google Scholar
5. Rao, N. et al., J. Aerosol Sci., 29, 707 (1998)Google Scholar
6. Akedo, J. and Lebedev, M.: Recent Res. Devel. Mat. Sci. 2, ed. Pandalai, S. G. (Research Signpost, India, 2001) pp. 51.Google Scholar
7. Akedo, J. and Lebedev, M., Jpn. J. Appl. Phys., 38, 5397 (1999)Google Scholar
8. Levedev, M., Akedo, J., Mori, K. and Eiju, T.: J. Vac. Sci. & Tech. A, 18, 563 (2000)Google Scholar
9. Vreeland, T. Jr, Montilla, K. L. and Mutz, A. H.: J. Appl. Phys., 82, 2840 (1997)Google Scholar
10. Holmquist, T. J., Johnson, G. R., Grady, D. E., Lopatin, C.M. and Hertel, E. S.: Proc. 15th Int. Symp. On Ballistics, TB31, Jerusalem, Israel, 21-24 May, (1995) pp. 237.Google Scholar