Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-12-08T07:39:11.886Z Has data issue: false hasContentIssue false

Thermite Initiation Processes and Thresholds

Published online by Cambridge University Press:  21 February 2012

Curtis E. Johnson
Affiliation:
NAVAIR, Research Division, 1900 N Knox Rd, Stop 6303, China Lake, CA 93555, U.S.A.
Kelvin T. Higa
Affiliation:
NAVAIR, Research Division, 1900 N Knox Rd, Stop 6303, China Lake, CA 93555, U.S.A.
Thao T. Tran
Affiliation:
NAVAIR, Energetics Research Division, 1900 N Knox Rd, China Lake, CA 93555, U.S.A.
W. Rick Albro
Affiliation:
NAVAIR, Energetics Research Division, 1900 N Knox Rd, China Lake, CA 93555, U.S.A.
Get access

Abstract

The objectives of this work are to characterize thermite initiation processes and thresholds, and to develop thermite reactive trains, where a sensitive nanothermite ignites an insensitive micron thermite, which produces little gas. Nanothermites, including Al/AgIO3, Al/Bi2O3, Al/MoO3, Al/Fe3O4, and Ti/AgIO3, were characterized for their ignition behavior by spark and resistive heating. Energies for spark and thermal initiation were as low as 9 and 140 μJ, respectively. Thermal initiation results were consistent with local temperature as the main controlling factor. The propagation rate of the Al/Fe3O4 nanothermite was about 100X slower than that of the other nanothermites. This low reactivity is attributed to the high volatilization temperature and high melting point of the oxidizer. Mixing of 90% Al/Fe3O4 nanothermite with 10% of a more sensitive, high-gas-producing nanothermite gave materials with the same sensitivity as the sensitive nanothermite. Thus, the mixture provides a safer sensitive nanothermite. Thermites with micron-scale ingredients were pressed into pellets and ignited with small amounts of nanothermite. Gas production of micron thermite compositions was reduced by adding the intermetallic composite, Ti/2B, or excess iron. In both cases, a single hot mass was produced, while the pure micron Al/Fe2O3 produced a dispersion of particles.

Type
Research Article
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Danen, W. C. and Martin, J. A., U.S. Patent No. 5 266 132 (30 November 1993).Google Scholar
2. Bockmon, B. S., Pantoya, M. L., Son, S. F., Asay, B. W., and Mang, J. T., J. Appl. Phys. 98, 064903–1 to 064903-7 (2005).Google Scholar
3. Pantoya, M. L. and Granier, J. J., Propellants, Explosives, Pyrotechnics 30(1), 5362 (2005).Google Scholar
4. Klapotke, T. M., Chemistry of High-Energy Materials (Walter de Gruyter GmbH & Co., New York, 2011), pp. 188197.Google Scholar
5. Eric Sanders, V., Asay, B. W., Foley, T. F., Tappan, B. C., Pacheco, A. N., and Son, S. F., J. Propulsion Power 23(4), 707714 (2007).Google Scholar
6. Sullivan, K. T., Piekiel, N. W., Chowdhury, S., Wu, C., Zachariah, M. R., and Johnson, C. E., Combustion Science and Technology, 183(3), 285302 (2011).Google Scholar
7. Johnson, C. E., Higa, K. T., and Albro, W. R. in Proceedings of the 35th International Pyrotechnics Seminar (2008).Google Scholar
8. Some thermodynamic data was obtained from http://www.crct.polymtl.ca/reacweb.htm. Neither the author nor the Materials Research Society warrants or assumes liability for the content or availability of URLs referenced in this paper.Google Scholar
9. Zhang, K., Rossi, C., Petrantoni, M., and Mauran, N., J. Microelectromech. Syst. 17(4), 832836 (2008).Google Scholar