Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-01T02:11:37.319Z Has data issue: false hasContentIssue false
  • English
  • Français

The Study of Modified Layers in SiCOH Dielectrics using Spectroscopic Ellipsometry

Published online by Cambridge University Press:  01 February 2011

Marcus A. Worsley ,
Stacey F. Bent ,
Stephen M. Gates ,
Kaushik Kumar ,
Timothy Dalton  and
Jeffrey C. Hedrick
Marcus A. Worsley
Affiliation:
Dept. of Chemical Engineering, Stanford University, Stanford, CA 94305-5025
Stacey F. Bent
Affiliation:
Dept. of Chemical Engineering, Stanford University, Stanford, CA 94305-5025
Stephen M. Gates
Affiliation:
T.J. Watson Research Center, IBM, Yorktown Heights, NY 10598
Kaushik Kumar
Affiliation:
T.J. Watson Research Center, IBM, Yorktown Heights, NY 10598
Timothy Dalton
Affiliation:
T.J. Watson Research Center, IBM, Yorktown Heights, NY 10598
Jeffrey C. Hedrick
Affiliation:
T.J. Watson Research Center, IBM, Yorktown Heights, NY 10598
Get access

Abstract

The current challenge in designing new low-k dielectrics is realizing sufficient mechanical and chemical stability such that the material can be integrated into current damascene schemes. The material of interest in this study is a nonporous SiCOH composite (carbon-doped silicon oxide, also known as organosilicate glass “OSG”) for use as an intermetal dielectric (IMD). During integration of this IMD, processing steps such as etch, resist strip and chemicalmechanical polishing for planarization may chemically alter the outer layer of the dielectric. Here, spectroscopic ellipsometry is used to characterize the modified layer of SiCOH films after exposure to different resist strip plasmas. The data are analyzed based on a 2-layer model, consisting of a carbon-deficient layer on the surface of the low-k SiCOH dielectric. This model is supported by XPS and FTIR data. The effects of two types of plasma etch chemistry on the formation of this modified layer were studied, and differences between the two chemistries were found. The 2-layer model accurately describes the modifications produced by the oxidizing plasma, but its description of the modified layer formed by the plasma involving nitrogen is not complete. A 3-layer model with an additional nitrogen-doped layer is suggested.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 766: Symposium E – Materials, Technology and Reliability for Advanced Interconnects and Low-k Dielectrics - 2003 , 2003 , E3.29
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. International Technology Roadmap for Semiconductors (ITRS, Santa Clara, CA, 2001).Google Scholar
2. Morgen, M., Ryan, E. T., Zhao, J.H., Hu, C., Cho, T., and Ho, P. S., Annu. Rev. Mater. Sci. 30, 645 (2000).Google Scholar
3. Hedrick, J. L., Miller, R. D., Hawker, C. J., Carter, K. R., Volksen, W., Yoon, D. Y., and Trollsas, M., Adv. Mater. 10, 1049 (1998).Google Scholar
4. Grill, Alfred, Gates, Stephen M., and Patel, V. V., U. S. Patent No. 6 312 793 (6 November 2001).Google Scholar
5. Shamiryan, D. G., Baklanov, M. R., Vanhaelemeersch, S., and Maex, K., Electrochemical and Solid-State Letter 4, F3 (2001).Google Scholar
6. Kohl, A. T., Minma, R., Shick, R., Rhodes, L., Wang, Z. L., and Kohl, P. A., Electrochemical and Solid-State Letters 2, 77 (1999).Google Scholar
7. Yang, S., Mirau, P. A., Pai, C. S., Nalamasu, O., Reichmanis, E., Pai, J. C., Obeng, Y. S., Seputro, J., Lin, E. K., Lee, H. J., Sun, J., and Gidley, D.W., Chem.Mater. 14, 369 (2002).Google Scholar
8. Jain, A., Rogojevic, S., Ponoth, S., Agarwal, N., Matthew, I., Gill, W. N., Persans, P., Tomozawa, M, Plawsky, J. L., and Simonyi, E., Thin Solid Films 2001, 513.Google Scholar
9. O'Neill, M., Lukas, A., Vrtis, R., Vincent, J., Peterson, B., Bitner, M., and Karwacki, E., Semiconductor International June 2002, 93.Google Scholar
10. Ito, S., Homma, Y., Sasaki, E., Uchimara, S., and Morishama, H., J. Electrochem. Soc. 137, 1212 (1990).Google Scholar
11. Ryan, E. T., Martin, J., Junker, K., Wetzel, J., Gidley, D. W., and Sun, J., J.Mater. Res. 16, 3335 (2001).Google Scholar
12. Chang, T. C., Liu, P. T., Mor, Y. S., Tsai, T.M., Chen, C.W., Mei, Y. J., Pan, F. M., Wu, W. F., and Sze, S. M., J. Vac. Sci. Technol. B 20, 1561 (2002).Google Scholar