Hostname: page-component-7bb8b95d7b-2h6rp Total loading time: 0 Render date: 2024-10-06T23:29:14.378Z Has data issue: false hasContentIssue false

Ru/Ta Alloying Behavior and its Implications for Laminate Based CMOS Integration

Published online by Cambridge University Press:  01 February 2011

Judit G. Lisoni
Affiliation:
schram@imec.be, IMEC, SPDT Div., Kapeldreef 75, Leuven, -, B-3001 Heverlee, Belgium
Tom Schram
Affiliation:
schram@imec.be, IMEC, SPDT Div., Kapeldreef 75, Leuve n, B-3001 Heverlee, Belgium
Thomas Witters
Affiliation:
witterst@imec.be, IMEC, SPDT Div., Kapeldreef 75, Leuven, B-3001 Heverlee, Belgium
Nausikaa Van Hoornick
Affiliation:
nausikaa@imec.be, IMEC, SPDT Div., Kapeldreef 75, Leuven, B-3001 Heverlee, Belgium
Naoki Yamada
Affiliation:
yamada@imec.be, IMEC, SPDT Div., Kapeldreef 75, Leuven, B-3001 Heverlee, Belgium
Stefan De Gendt
Affiliation:
degendt@imec.be, IMEC, SPDT Div., Kapeldreef 75, Leuven, B-3001 Heverlee, Belgium
Get access

Abstract

The microstructural and electrical characterizations of RuxTa1-x alloys obtained from Ru-Ta laminates are presented. The films were deposited on SiO2 and HfO2 and capped with TiN to avoid oxidation of the top surface. The alloys were attained by post-anneal thermal treatments in the range of 500-1000 °C in Ar atmosphere. Co-sputtered RuxTa1-x alloys were used as references. In particular, Ru0.4Ta0.6 phase could be obtained when the Ru-Ta laminate was annealed at 1000 °C. The alloying reaction is limited either by the tantalum nitride or oxide formation being the source for Nitrogen the TiN capping used on top of the stack and the Oxygen either the dielectric films or the one stuffing the films after exposure to the atmosphere.

Independent of the Ta content a mid gap work function was obtained. Measured WF's in laminate-obtained alloys and alloys themselves differ from other literature data, where a more n-type like WF are measured, and indicating process dependence. In the present study mid-gap or rather p-type work functions were found, 4.5 eV < WF < 4.9 eV.

Keywords

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Zhong, H. et al, IEDM Tech. Dig. 2001, pp. 467 Google Scholar
[2] Zhong, H., Hong, S.-N., Suh, Y.-S., Lazar, H., Heuss, G. and Misra, V., IEEE 2001 Google Scholar
[3] Misra, V., IEEE Electron Dev. Lett. 23(6) (2002) 354 Google Scholar
[4] Lee, J.-H., Suh, Y., Lazar, H., Jha, R., Gurganus, J., Lin, Y. and Misra, V., IEDM 03-323Google Scholar
[5] Tsui, B.-Y., IEEE Electron Dev. Lett. 24(3) (2003) 153 Google Scholar
[6] In AES spectra Hf major peaks are ~ 170 eV and 1625 eV. The first peak is in a similar energy range as some low energy Ta peaks. Hence, the “Hf” in the Ta layer is actually Ta.Google Scholar
[7] Wuu, D.S., Horng, R.H., Chang, C.C., Wu, Y.Y., Appl. Surf. Sci. 169–170 (2001) 392 Google Scholar
[8] Lee, J.-H., Zhong, H., -Suh, Y.S., Heuss, G., Gurganus, J., Chen, B., Misra, V., IEDM 2002 Google Scholar