Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-22T03:25:28.015Z Has data issue: false hasContentIssue false
  • English
  • Français

Roughening of Au(111) Surfaces During Ion Beam Erosion: A Scanning Tunneling Microscope and X-Ray Diffraction Study

Published online by Cambridge University Press:  10 February 2011

A. Judy ,
M.V. Ramana Murty ,
E. Butler ,
J. Pomeroy ,
B.H. Cooper ,
A.R. Woll ,
J.D. Brock ,
S. Kycia  and
R.L. Headrick
A. Judy
Affiliation:
Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York 14853
M.V. Ramana Murty
Affiliation:
Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York 14853
E. Butler
Affiliation:
Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York 14853
J. Pomeroy
Affiliation:
Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York 14853
B.H. Cooper
Affiliation:
Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York 14853
A.R. Woll
Affiliation:
School of Applied and Engineering Physics, Cornell University, Ithaca, New York 14853
J.D. Brock
Affiliation:
School of Applied and Engineering Physics, Cornell University, Ithaca, New York 14853
S. Kycia
Affiliation:
Cornell High Energy Synchrotron Source(CHESS), Wilson Laboratory, Ithaca, New York 14853
R.L. Headrick
Affiliation:
Cornell High Energy Synchrotron Source(CHESS), Wilson Laboratory, Ithaca, New York 14853
Get access

Abstract

Using Scanning Tunneling Microscopy(STM) and X-ray diffraction(XRD), we have studied the development of surface roughness on Au(111) during 500eV Ar+ ion irradiation at different angles. During normal incidence erosion the surface roughens and pattern formation occurs. The surface morphology is a mixture of mounds and pits superimposed onto a larger structure of channels and valleys. The characteristic spacing between features grows with a power law behavior t27, where t is the amount of time the sample was irradiated, in agreement with previous measurements[l]. At glancing angles, erosion proceeds smoothly, but not in layer-by-layer fashion. Finally, a combination of glancing angle and normal incidence erosion is used to create a rippled morphology

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 570: Symposium V – Epitaxial Growth , 1999 , 61
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Murty, M.V. Ramana et al. , Phys. Rev. Lett. 80, 4713 (1998).Google Scholar
2. Rusponi, S. et al. , Phys. Rev. Lett. 81, 4184 (1998).Google Scholar
3. Micheley, T. and Comsa, G., Nucl Instr Meth B. 82, 207 (1993).Google Scholar
4. Girard, J.C. et al. , Surf. Sci. 302, 73 (1994)Google Scholar
5. Chey, S. et al. , Phys. Rev. B 57, 16,676 (1995)Google Scholar
6. Wissing, M. et al. , Rev. Sci. Instrum. 67, 4320 (1996).Google Scholar
7. Barth, J.V. et al. , Phys. Rev. B 42 9307 (1990).Google Scholar
8. Wöll, Ch. et al. , Phys. Rev. B 39 7988 (1989).Google Scholar
9. Eklund, E. et al. , Surf. Sci. 285, 157 (1993)Google Scholar
10. Sputtering by Particle Bombardment, edited by Behrisch, R. (Springer, Berlin, 1981).Google Scholar
11. Because the roughness of the surface strongly affects the average sputtering yield, the actual amount of material removed is unknown. The ion flux for a flat terrace correspondsto 8* 1012 Ar/s/cm2.Google Scholar
12. Sandy, A. R. et al. , Phys. Rev. B 43, 4667 (1991).Google Scholar