Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-26T13:52:42.548Z Has data issue: false hasContentIssue false

In-Situ Magnetic Field Induced Structure and Properties of Epitaxial Spinel Ferrite Thin Films Prepared by Pulsed Laser Deposition (PLD) (Dynamic Aurora PLD Method)

Published online by Cambridge University Press:  01 February 2011

Naoki Wakiya
Affiliation:
Department of Metallurgy and Ceramics Science, Graduate School of Science and Engineering, Tokyo Institute of Technology, 2–12–1–S7–6 O-okayama, Meguro-ku, Tokyo 152–8550, Japan
Toyokazu Nagamune
Affiliation:
Department of Metallurgy and Ceramics Science, Graduate School of Science and Engineering, Tokyo Institute of Technology, 2–12–1–S7–6 O-okayama, Meguro-ku, Tokyo 152–8550, Japan
Kazuo Shinozaki
Affiliation:
Department of Metallurgy and Ceramics Science, Graduate School of Science and Engineering, Tokyo Institute of Technology, 2–12–1–S7–6 O-okayama, Meguro-ku, Tokyo 152–8550, Japan
Nobuyasu Mizutani
Affiliation:
Department of Metallurgy and Ceramics Science, Graduate School of Science and Engineering, Tokyo Institute of Technology, 2–12–1–S7–6 O-okayama, Meguro-ku, Tokyo 152–8550, Japan
Get access

Abstract

The influence of an in-situ magnetic field on the plume during pulsed laser deposition (PLD) to prepare epitaxial nickel zinc ferrite (NZF) thin films were investigated. An air core coil (solenoid coil) was installed between a target and a substrate, and up to 43 mT of magnetic field was generated by direct current (DC)(Dynamic Aurora PLD method). Application of magnetic field brought about following structural and property changes;

(1) deposition rate was almost doubled, (2) the concentration of Ni and Zn in the film was decreased, (3) lattice parameter was unchanged, and (4) magnetization and coercivity was increased. Since deposition rate was increased by application of magnetic field, films with same thickness was also prepared without magnetic field, however, magnetic properties were unchanged. This indicates that application of in-situ magnetic field improved magnetic properties.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dirnberger, L., Dyer, P. E., Farrar, S. R. and Key, P. H., “Proceeding of the Second International Conference on Laser Ablation”, AIP Conference Proceedings 288, 349 (AIP, New York, 1993).Google Scholar
2. Dirnberger, L., Dyer, P. E., Farrar, S. R. and Key, P. H., Appl. Phys. A 59, 311 (1994).Google Scholar
3. Lash, J. S., Gilgenbach, R. M. and Ching, C. H., Appl. Phys. Lett. 65, 531 (1994).Google Scholar
4. Kokai, F., Koga, Y. and Heimann, R. B., Appl. Surf. Sci. 96–98, 261 (1996).Google Scholar
5. Kokai, F., Jpn. J. Appl. Phys. 36, 3504 (1997).Google Scholar
6. Tachiki, M. and Kobayashi, T., Jpn. J. Appl. Phys. 38, 3642 (1999).Google Scholar
7. Gross, B., Gryez, B., Miklossy, K., “Plasma Technology” (Ilife, London, 1968).Google Scholar
8. Okoshi, M., Hanabusa, M. and Miyake, K., Jpn. J. Appl. Phys. 36, L801 (1997).Google Scholar
9. Okoshi, M. and Hanabusa, M., “Proceeding of the 1997 Pacific Rim Conference on Lasers and Electro-Optics”, pp. 282 (1997).Google Scholar
10. Tachiki, M., Hosomi, T. and Kobayashi, T., Jpn. J. Appl. Phys. 39, 1817 (2000).Google Scholar
11. Kobayashi, T., Akiyoshi, H. and Tachiki, M., Appl. Surf. Sci. 197–198, 294 (2002).Google Scholar
12. Yata, S., Nakashima, Y. and Kobayashi, T., Thin Solid Films 445, 259 (2003).Google Scholar
13. Nagamune, T., Wakiya, N., Shinozaki, K. and Mizutani, N., to be published.Google Scholar
14. Smit, J. and Wijn, H. P. J., Ferrites, John Wiley and Sons, New York, pp.156 (1959).Google Scholar