Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-19T09:23:35.956Z Has data issue: false hasContentIssue false
  • English
  • Français

Electroplating of Fluoropolymers using ECR Plasma Deposited TiN as Interlayer

Published online by Cambridge University Press:  15 February 2011

A. Weber ,
A. Dietz ,
R. Pöckelmann  and
C.-P. Klages
A. Weber
Affiliation:
Fraunhofer-Institute for Surface Engineering and Thin Films, Bienroder Weg 54 E, D-38108 Braunschweig, F.R.G.
A. Dietz
Affiliation:
Fraunhofer-Institute for Surface Engineering and Thin Films, Bienroder Weg 54 E, D-38108 Braunschweig, F.R.G.
R. Pöckelmann
Affiliation:
Fraunhofer-Institute for Surface Engineering and Thin Films, Bienroder Weg 54 E, D-38108 Braunschweig, F.R.G.
C.-P. Klages
Affiliation:
Fraunhofer-Institute for Surface Engineering and Thin Films, Bienroder Weg 54 E, D-38108 Braunschweig, F.R.G.
Get access

Abstract

A novel low temperature process for titanium nitride (TiN) deposition by means of an electron cyclotron resonance (ECR) plasma CVD process was applied to poly(tetrafluoroethylene) (PTFE). The organometallic compound tetrakis(dimethylamido)titanium (TDMAT) introduced into the downstream region of a nitrogen ECR plasma was used as a precursor for TiN deposition at 100°C.

The thin TiN films (thickness 15-30 nm) act as interlayers to activate the electroless deposition of copper followed by an electroplating process. Prior to the deposition of the interlayer, the samples were treated on a biased susceptor with argon ions to enhance the adhesion of the TiN interlayer. This metallization procedure avoids the use of toxic and pollutive etching agents and yields adherent copper layers on PTFE.

The maximum adhesion of the metal film on PTFE was established to be 13 N/mm2. As shown by atomic force microscopy (AFM), TiN grains were formed on the fluoropolymer surface. Film composition was investigated by secondary ionization mass spectrometry (SIMS).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 385: Symposium N – Polymer/Inorganic Interfaces II , 1995 , 233
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wu, P. K., Yang, G.-R., Ma, X. F., and Lu, T.-M., Appl. Phys. Lett. 65, 508 (1994)Google Scholar
2. Sacher, E., Progress in Surface Science 47, 273 (1994)Google Scholar
3. Siperko, L. M., and Thomas, R. R., J. Adhesion Sci. Technol. 3, 157 (1989)Google Scholar
4. Chang, C.-A., Appl. Phys. 51, 1236 (1987)Google Scholar
5. Wheeler, D. R. and Pepper, S. V., J. Vac. Sci. Technol. 20, 442 (1982)Google Scholar
6. Michael, R. and Stulik, D., J. Vac Sci. Technol. A4, 1861 (1986)Google Scholar
7. Haag, C. and Suhr, H., Appl. Phys. A47, 199 (1988)Google Scholar
8. Weber, A., Nikulski, R., Klages, C.-P., Gross, M. E., Brown, W. L., Dons, E., and Charatan, R. M., J. Electrochem. Soc. 141, 849 (1994)Google Scholar
9. Garbassi, F., Morra, M., Occhiello, E., Polymer Surfaces (John Wiley & Sons, New York, 1994), p. 341 Google Scholar
10. Schonhorn, H. and Ryan, F. W., J. Adhesion 1, 43 (1969)Google Scholar