Hostname: page-component-76fb5796d-skm99 Total loading time: 0 Render date: 2024-04-25T13:44:23.228Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effect of Source Microstructure on the Close-Space Sublimation of CdTe Thin Films for Solar Cell Applications

Published online by Cambridge University Press:  10 February 2011

D. Albin ,
D. Rose ,
A. Swartzlander ,
H. Moutinho ,
F. Hasoon ,
S. Asher ,
R. Matson  and
P. Sheldon
D. Albin
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
D. Rose
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
A. Swartzlander
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
H. Moutinho
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
F. Hasoon
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
S. Asher
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
R. Matson
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
P. Sheldon
Affiliation:
National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401
Get access

Abstract

The microstructure of CdTe sources grown on bare 7059 and SnO2-coated 7059 glass substrates used in the close-space sublimation (CSS) growth of CdTe films, is affected by nucleation conditions during their fabrication. For CdTe sources grown on bare glass substrates, denser source microstructures with smaller grains are promoted by low-temperature nucleation conditions. Growth rates of CdTe films deposited using these source plates are inversely proportional to the packing density of the grains. CdTe sources grown on glass undergo significant texture changes during their use in subsequent CSS deposition. CdTe sources grown on SnO2-coated glass substrates exhibit dense structures both with and without low-temperature nucleation and increased grain size with low-temperature nucleation. These source plates show less texture change associated with thermal annealing than their bare-glass counterparts, however, they are much more susceptible to CdO formation during subsequent CSS deposition processes in which oxygen is present. Source oxidation results in a decrease of the (111)/(220) x-ray diffraction intensity. Analysis of the (111)/(220) intensity ratio with and without source oxidation suggests the preferential formation of CdO on the (111) planes. In general, source oxidation appears to be a inversely proportional to the grain size of the source material.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 410: Symposium S – Covalent Ceramics III-Science and Technology of Non-Oxides , 1995 , 45
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Zweibel, K., Ullal, H.S., von Roedern, B.G., Noufi, R., Coutts, T.J., M.M. A1-Jassim, Proc. of the 23rd IEEE Photovoltaic Specialists Conference — 1993, (1993), p. 379.Google Scholar
2. Chu, T.S., Chu, S.S., Ferekides, C., Wu, C.Q., Britt, J., and Wang, C., J. Appl. Phys. 70 (12), p. 7608 (1991).Google Scholar
3. Britt, J. and Ferekides, C., Appl. Phys. Lett. 62 (22), p. 2851 (1993).Google Scholar
4. Ferekides, C., Britt, J., Ma, Y., and Killian, L., Proc. of the 23rd IEEE Photovoltaic Specialists Conference- 1993, (1993), p. 389.Google Scholar
5. Mitchell, K.W., Eberspacher, C., Cohen, F., Avery, J., Duran, G., and Bottenberg, W., Solar Cells, 23, p. 49 (1988).Google Scholar
6. Anthony, T.C., Ph. D.Thesis, Stanford University (1984).Google Scholar