Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-19T10:51:14.664Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Mismatch and Interface Structure of Epitaxial Pb(Mg1/3Nb2/3)O3 (90%)- PbTiO3 (10%) Relaxor Thin Films

Published online by Cambridge University Press:  02 July 2020

G. Y. Yang ,
V. Nagarajan ,
Z. L. Wang ,
Y. H. Li  and
R. Ramesh
G. Y. Yang
Affiliation:
Materials Research Science and Engineering Center, University of Maryland, College Park, MD, 20742
V. Nagarajan
Affiliation:
Materials Research Science and Engineering Center, University of Maryland, College Park, MD, 20742
Z. L. Wang
Affiliation:
School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, 30332-0245
Y. H. Li
Affiliation:
Materials Research Science and Engineering Center, University of Maryland, College Park, MD, 20742
R. Ramesh
Affiliation:
Materials Research Science and Engineering Center, University of Maryland, College Park, MD, 20742
Get access

Extract

Pb(Mg1/3Nb2/3)O3 (PMN)- and its solid solution with PbTiO3 (PT) is one of the lead-based relaxor ferroelectrics and has been the most widely studied materials because of their high dielectric constants and high electrostrictive coefficients. The potential impact of the thin film ferroelectric relaxors in the integrated actuators and sensing applications has stimulated research on the growth and characterization of thin films. Thin films have been made by pulsed-laser deposition (PLD), sol-gel and metalrganic chemical-vapor deposition. It is known that electrical properties may be strongly influenced by the microstructure of films and the interface structures between different phase in such heterostructure systems. In this paper, we report the investigation of interfacial mismatch and interface structure of epitaxial Pb(Mg1/3Nb2/3)O3 (90%)- PbTiO3 (10%) relaxor thin film by high resolution transmission electron microscopy (HRTEM).

Thin film capacitors of Pb(Mg1/3Nb2/3)O3 (90%) - PbTiO3 (10%) (PMN-PT) were grown by PLD on (100)-oriented LaA1O3 (LAO) substrates. La0.5Sr0.5CoO3 (LSCO) layer was deposited as electrode. Cross-sectional transmission electron microscopy samples were prepared following the traditional procedures including cutting, gluing, polishing and ion milling.

Type
Films and Coatings
Information
Microscopy and Microanalysis , Volume 6 , Issue S2: Proceedings: Microscopy & Microanalysis 2000, Microscopy Society of America 58th Annual Meeting, Microbeam Analysis Society 34th Annual Meeting, Microscopical Society of Canada/Societe de Microscopie de Canada 27th Annual Meeting, Philadelphia, Pennsylvania August 13-17, 2000 , August 2000 , pp. 462 - 463
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

1.Nagarajan, V., Ganpule, C.S., Nagaraj, B., Aggarwal, S., Alpay, S. P., Roytburd, A. L., Williams, E. D. and Ramesh, R., Appl. Phys. Lett. 75, 4283(1999).CrossRefGoogle Scholar
2.Kighelman, Z., Damjanovic, D., Seifert, A., Sagolwicz, L. and Setter, N., Appl. Phys. Lett. 73, 2281 (1998).CrossRefGoogle Scholar
3.Takeshima, Y., Shiratsuyu, K., Takagi, H. and Tomono, K., Jpn. J. Appl. Phys., Part 1 34, 5083 (1995).CrossRefGoogle Scholar
4.Wang, Z.L. and Kang, Z.C., Functional and Smart Materials-Structural Evolution and Structural Analysis, Plenum Press: New York (1998).CrossRefGoogle Scholar