Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-23T21:25:38.727Z Has data issue: false hasContentIssue false
  • English
  • Français

In-Situ Transmission Elecron Microscopy (TEM) Study of the Sintering of Sputtered Copper Nanoparticles on (001) Copper

Published online by Cambridge University Press:  02 July 2020

M. Yeadon ,
J.C. Yang ,
R.S. Averback ,
J.W. Bullard ,
D.L. Olynick  and
J.M. Gibson
M. Yeadon
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL61801
J.C. Yang
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL61801
R.S. Averback
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL61801
J.W. Bullard
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL61801
D.L. Olynick
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL61801
J.M. Gibson
Affiliation:
Materials Research Laboratory, University of Illinois at Urbana-Champaign, Urbana, IL61801
Get access

Extract

The large surface area: volume ratios and fine grain size of nanophase materials give rise to novel and exciting structural and electrical properties that are of considerable scientific and technological interest. Using copper as a model system we have investigated the sintering of sputtered copper nanoparticles (4-20nm diameter) with a copper substrate in a novel UHV in-situ TEM.

The nanoparticles were generated in a UHV chamber built into the side of the column by sputtering in 1.5Torr Ar. They were transported into the microscope in the gas phase and deposited on an electron transparent (001) copper foil mounted on a heated support. A typical bright-field (BF) image of the sample immediately after deposition at room temperature is shown in Fig. 1. The particles have assumed a random orientation on the substrate and remain stable for many hours at room temperature. The presence of both single particles and agglomerates of particles is evident in this image and examples are labelled ‘P’ and ‘A’, respectively

Type
Nanocrystals and Nanocomposites: Novel Structures For Catalysis, Electronics, and Micromechanics
Information
Microscopy and Microanalysis , Volume 3 , Issue S2: Proceedings: Microscopy & Microanalysis '97, Microscopy Society of America 55th Annual Meeting, Microbeam Analysis Society 31st Annual Meeting, Histochemical Society 48th Annual Meeting, Cleveland, Ohio, August 10-14, 1997 , August 1997 , pp. 401 - 402
Copyright
Copyright © Microscopy Society of America 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

‘Nanomaterials: Synthesis, Properties and Applications,’ Ed. by Edelstein, A. and Cammarata, R..Google Scholar
McDonald, M.L., Gibson, J.M. and Unterwald, F.C., Rev. Sei. Instrum. 60 (1989), 700.10.1063/1.1141004CrossRefGoogle Scholar
Olynick, D.L., Gibson, J.M. and Averback, R.S., Mater. Sei. Eng. A 204 (1995), 54.10.1016/0921-5093(95)09937-9CrossRefGoogle Scholar
Kuczynski, C., Trans. AIME 185 (1949), 169.Google Scholar
Nichols, F.A. and Mullins, W.W., J. Appl. Phys. 36 (1965), 1826.10.1063/1.1714360CrossRefGoogle Scholar
Lange, F.F. and Kellett, B.J., J. Am. Ceram. Soc. 72 (1989), 735.10.1111/j.1151-2916.1989.tb06209.xCrossRefGoogle Scholar