Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-23T22:19:05.090Z Has data issue: false hasContentIssue false
  • English
  • Français

Numerical Analysis of Cooling an Electronic Circuit Component With Cross Flow and Jet Combination

Published online by Cambridge University Press:  02 July 2018

T. Demircan
T. Demircan*
Affiliation:
Department of Mechanical Engineering Faculty of Engineering, Kιrιkkale UniversityKιrιkkale, Turkey
*
*Corresponding author (tolgademircan@gmail.com)
Get access

Abstract

In this study, cooling of a constant temperature cube that represents electronic components inserted inside a channel are investigated. For this purpose, primary air with constant velocity is transferred from channel input, and secondary air with impinging jet is transferred to channel upper surface which corresponds to top part of the components. The flows are in contact with the cube that has constant temperature and effects the thermal boundary layer on the cube surfaces to create a heat transfer from cube to fluid. This situation is simulated under turbulence conditions for different values of nozzle jet input velocity (Vj) and channel input velocity (Uc) using Reynolds number between 30000-90000 based on channel input velocity. For this purpose, velocity, temperature, and pressure distributions are obtained for the solution region using CFD package program. As a result, flow and thermal characteristics inside the channel are parametrically calculated based on Reynolds number, Nusselt number, and cube surface temperature.

Keywords

Cross flowCooling electronicImpinging jetCFD
Type
Research Article
Information
Journal of Mechanics , Volume 35 , Issue 3 , June 2019 , pp. 395 - 404
Copyright
© The Society of Theoretical and Applied Mechanics 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Hajmohammadi, M. R., “Optimal Design of Tree- Shaped Inverted Fins,” International Journal of Heat and Mass Transfer, 116, pp. 1352–1360 (2018).Google Scholar
Hajmohammadi, M. R., “Introducing a ψ-Shaped Cavity for Cooling a Heat Generating Medium,” International Journal of Thermal Sciences, 121, pp. 204–212 (2017).Google Scholar
Hajmohammadi, M. R., “Design and Analysis of Multi-Scale Annular Fin Attached to a Pin Fin,” International Journal of Refrigeration (2018).Google Scholar
Rundstrom, D. and Moshfegh, B., “Investigation of Flow and Heat Transfer of an Impinging Jet in a Cross-Flow for Cooling of a Heated Cube,” Journal of Electronic Packaging, 2, pp. 150–157 (2006).Google Scholar
Meinders, E. R., Van Der Meer, T. H. and Hanjalic, K., “Local Convective Heat Transfer from an Array of Wall-Mounted Cubes,” International Journal of Heat and Mass Transfer, pp. 335–346 (1998).Google Scholar
Lee, J. and Lee, S. J., “Stagnation Region Heat Transfer of a Turbulent Axisymmetric Jet Impingement,” Experimental Heat Transfer, 156, pp. 137–156 (2010).Google Scholar
Mergen, S., “Numerical Investigation of Cooling of an Electronic Component with Crossflow and Impinging Jet,” M. S. Thesis, Department of Mechanical Engineering, Gazi University, Ankara, Turkey (2014).Google Scholar
Ostheimer, D. and Yang, Z., “A CFD Study of Twin Impinging Jets in a Cross-Flow,” The Open Numerical Methods Journal, 4, pp. 24–34 (2012).Google Scholar
Guoneng, L., Zhihua, X., Youqu, Z., Wenwen, G. and Cong, D., “Experimental Study on Convective Heat Transfer from a Rectangular Flat Plate by Multiple Impinging Jets in Laminar Cross Flows,” International Journal of Thermal Sciences, 108, pp. 123–131 (2016).Google Scholar
Hayee, M. W., Tekasakul, P., Eiamsa-ard, S. and Nuntadusit, C., “Flow and Heat Transfer Characteristics of In-Line Impinging Jets With Cross-Flow At Short Jet-To-Plate Distance,” Experimental Heat Transfer, 28, pp. 511–530 (2015).Google Scholar
Qi, M., Chen, Z. and Fu, R., “Flow Structure of the Plane Turbulent Impinging Jet in Cross Flow,” Journal of Hydraulic Research, 39, pp. 155–161 (2001)Google Scholar
Rundström, D. and Moshfegh, B., “Large-Eddy Simulation of an Impinging Jet in a Cross-Flow on a Heated Wall-Mounted Cube,” International Journal of Heat and Mass Transfer, 52, pp. 921–931 (2009).Google Scholar
Popovac, M. and Hanjalic, K., “Large-Eddy Simulations of Flow over a Jet-Impinged Wall-Mounted Cube in a Cross Stream,” International Journal of Heat and Fluid Flow, 28, pp. 1360–1378 (2007).Google Scholar
Chiang, K. T., “Modeling and Optimization of Designing Parameters for a Parallel-Plain Fin Heat Sink with Confined Impinging Jet Using The Response Surface Methodology,” Applied Thermal Engineering, 27, pp. 2473–2482 (2007).Google Scholar
Maghrabie, H. M., Attalla, M., Fawaz, H. E. and Khalil, M., “Numerical Investigation of Heat Transfer and Pressure Drop of In-Line Array of Heated Obstacles Cooled by Jet İmpingement in Cross-Flow,” Alexandria Engineering Journal, 56, pp. 285–296 (2017).Google Scholar
Heo, M. W., Lee, K. D. and Kim, K. Y., “Optimization of an Inclined Elliptic Impinging Jet with Cross Flow for Enhancing Heat Transfer,” Heat Mass Transfer, 47, pp. 731–742 (2011).Google Scholar
Shapiro, S., King, J., Karagozian, A. and M’Closkey, R., “Optimization of Controlled Jets in Crossflow,” 41st AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada (2003).Google Scholar
Yakhot, A., Liu, H. and Nikitin, N., “Turbulent Fow around a Wall-Mounted Cube: A Direct Numerical Simulation,” International Journal of Heat and Fluid Flow, 27, pp. 994–1009 (2006).Google Scholar
Popovac, M and Hanjalic, K., “Vortices and Heat Flux around a Wall-Mounted Cube Cooled Simultaneously by a Jet and a Crossflow,” International Journal of Heat and Mass Transfer, 52, pp. 4047–4062 (2009).Google Scholar
Malalasekera, W. and Versteeg, H. K., An Introduction to Computational Fluid Dynamics, The Finite Volume Method, Longman (2005).Google Scholar
Hajmohammadi, M. R., “Assessment of a Lubricant Based Nanofluid Application in a Rotary System,” Energy Conversion and Management, 146, pp. 78–86 (2017).Google Scholar
Hajmohammadi, M. R., “Cylindrical Couette Flow and Heat Transfer Properties of Nanofluids; Single- Phase and Two-Phase Analyses,” Journal of Molecular Liquids, 240, pp. 45–55 (2017).Google Scholar