Hostname: page-component-7c8c6479df-7qhmt Total loading time: 0 Render date: 2024-03-29T00:58:04.209Z Has data issue: false hasContentIssue false

Effects of Pavement Roughness on Rigid Pavement Stress

Published online by Cambridge University Press:  31 March 2011

C.-M. Kuo*
Affiliation:
Department of Civil Engineering, National Chen Kung University, Tainan City, Taiwan, 70101, R.O.C.
C.-R. Fu
Affiliation:
Department of Civil Engineering, National Chen Kung University, Tainan City, Taiwan, 70101, R.O.C.
K.-Y. Chen
Affiliation:
Department of Civil Engineering, National Chen Kung University, Tainan City, Taiwan, 70101, R.O.C.
*
* Associate Professor, corresponding author
Get access

Abstract

Pavement roughness causes pavement stress fluctuation along the road. However, the dynamic effects were not taken into account in most pavement design and studies. To investigate the influences of roadway roughness on pavement stresses, this study developed a coupled system consisting of a quarter-car model and an equivalent lump pavement model. The coupled system also incorporated measured road profiles. By means of transfer function in frequency domain, the deflections and stresses of pavements were computed in seconds. The results were validated with Westergaard's solutions satisfactorily. It was found that the critical roughness, which might cause extreme responses, is related to the vehicle speed and suspension of vehicles. The maximum tension at the bottom of pavements also depends on the size of bump. In addition, the study demonstrates the correlation between roughness index, IRI, and ISO roughness classifications. It was also found that disturbance due to model boundary affects simulation results significantly.

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Huang, Y. H., Pavement Analysis and Design. Second Edition Ed., Prentice Hall (2003).Google Scholar
2.Ioannides, A. M., “Concrete Pavement Analysis: The First Eighty Years,” International Journal of Pavement Engineering, 7, pp. 233249 (2006).Google Scholar
3.Gomez-Achecar, M., and Thompson, M. R., ILLI-PAVE Based Response Algorithms for Full-Depth Asphalt Concrete Flexible Pavements, in Transportation Research Record, N.R.C. Transportation Research Board, Ed., Washington, DC (1986).Google Scholar
4.Khazanovich, L. and Ioannides, A. M., “DIPLOMAT: Analysis Program for Bituminous and Concrete Pavements,” Transportation Research Record, pp. 5260 (1995).Google Scholar
5.Kuo, C. M. and Chou, F. J., “Development of 3-D Finite Element Model of Flexible Pavements,” Journal of the Chinese Institute of Engineers, 27, pp. 707717 (2004).Google Scholar
6.Al-Khoury, R., Scarpas, A., Kasbergen, C., and Blaauwendraad, J, “Dynamic Interpretation of Falling Weight Deflectometer Test Results: Spectra Element Method,” Transportation Research Record, pp. 4954 (2000).CrossRefGoogle Scholar
7.Chatti, K., “Use of Dynamic Analysis for Interpreting Pavement Response in Falling Weight Deflectometer Testing,” Materials Evaluation, 62, pp. 764774 (2004).Google Scholar
8.Khazanovich, L., “Dynamic Analysis of FWD Test Results for Rigid Pavements, in Nondestructive Testing of Pavement and Backcalculation of Moduli, Tayabji, S.D. and Lukanen, E.O., Ed.,” ASTM International: Seattle, p. 535 (2000).Google Scholar
9.Ullidtz, P., “Note on: “Verification of Falling Weight Deflectometer Backanalysis Using a Dynamic Finite Elements Simulation” by Andreas Loizos and A. (Tom) Scarpas,” International Journal of Pavement Engineering, 6, pp. 295297 (2005).CrossRefGoogle Scholar
10.Hardy, M. S. A. and Cebon, D., “Response of Continuous Pavements to Moving Dynamic Loads,” Journal of Engineering Mechanics, 119, pp. 17621780 (1993).Google Scholar
11.Hardy, M. S. A. and Cebon, D., “Importance of Speed and Frequency in Flexible Pavement Response,” Journal of Engineering Mechanics, 120, pp. 463482 (1994).Google Scholar
12.Sun, L. and Deng, X., “Predicting Vertical Dynamic Loads Caused by Vehicle-Pavement Interaction,” Journal of Transportation Engineering, 124, pp. 470478 (1998).Google Scholar
13.Liu, C. and Herman, R., “Road Profile, Vehicle Dynamics, and Ride Quality Rating,” Journal of Transportation Engineering, 125, p. 123 (1999).Google Scholar
14.Sun, L. and Kennedy, T. W., “Spectra Analysis and Parametric Study of Stochastic Pavement Loads,” Journal of Engineering Mechanics, 128, pp. 318327 (2002).CrossRefGoogle Scholar
15.Lombaert, G. and Degrande, G., “The Experimental Validation of a Numerical Model for the Prediction of the Vibrations in the Free Field Produced by Road Traffic,” Journal of Sound and Vibration, 262, pp. 309331 (2003).Google Scholar
16.Castell, M. A. and Pintado, P., “Sensitivity Analysis for Estimation of Pavement Fatigue Live,” Journal of Transportation Engineering, 125, p. 114 (1999).Google Scholar
17.Szilard, R., Theories and Applications of Plate Analysis: Classical Numerical and Engineering Methods. Prentice-Hall Inc (1974).Google Scholar
18.Kuo, C. M. and Lai, Y. C., “Study of Features of Numerical Simulation of Falling Weight Tests on Rigid Pavements,” International Society for Concrete Pavements: San Francisco, pp. 639646 (2008).Google Scholar
19.Sun, L., “Developing Spectrum-Based Models for International Roughness Index and Present Serviceability Index,” Journal of Transportation Engineering, 127, pp. 463470 (2001).CrossRefGoogle Scholar