Hostname: page-component-8448b6f56d-mp689 Total loading time: 0 Render date: 2024-04-20T01:40:21.261Z Has data issue: false hasContentIssue false
  • English
  • Français

Electric current-induced abnormal Cu/γ-InSn4 interfacial reactions

Published online by Cambridge University Press:  03 March 2011

Sinn-wen Chen  and
Shih-kang Lin
Sinn-wen Chen*
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-chu, Taiwan 300
Shih-kang Lin
Affiliation:
Department of Chemical Engineering, National Tsing Hua University, Hsin-chu, Taiwan 300
*
a) Address all correspondence to this author. e-mail: swchen@che.nthu.edu.tw
Get access

Abstract

The electromigration effect upon the γ-InSn4/Cu interfacial reactions have been studied by examining the γ-InSn4/Cu/γ-InSn4 couples annealed at 160 °C with and without current stressing. Scallop-type η-Cu6(Sn,In)5 phase layers are formed in the couples without current stressing and at the γ-InSn4/Cu interface where electrons are flowing from the γ-InSn4 to the Cu. The reaction path is Cu/η-Cu6(Sn,In)5/γ-InSn4. However, very large η-Cu6(Sn,In)5 compounds are found at the Cu/γ-InSn4 interface where electrons are from Cu to the γ-InSn4. Although the melting points of both γ-InSn4 and Cu are higher than 160 °C, the liquid phase is formed at 160 °C in the electrified couple at the downstream γ-InSn4 phase near the Cu/γ-InSn4 interface. The reaction path is Cu/η-Cu6(Sn,In)5/liquid/γ-InSn4. The liquid phase propagates along the grain boundaries of the γ-InSn4 matrix. The very large η-Cu6(Sn,In)5 compounds are the coupling results of the liquid phase penetration and the Cu transport enhancement due to electromigration.

Keywords

CuElectromigrationSoldering
Type
Articles
Information
Journal of Materials Research , Volume 21 , Issue 12 , December 2006 , pp. 3065 - 3071
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Wassink, R.J. Klein: Soldering in Electronics, 2nd ed. (Electrochemical Publications, Isle of Man, British Isles, England, 1989).Google Scholar
2.Liu, W-C., Chen, S-W., Chen, C-M.: The Al/Ni interfacial reactions under the influence of electric current. J. Electron. Mater. 27, L5 (1998).Google Scholar
3.Chen, S-W., Chen, C-M., Liu, W-C.: Electric current effects upon the Sn/Cu and Sn/Ni interfacial reactions. J. Electron. Mater. 27, 1193 (1998).CrossRefGoogle Scholar
4.Chen, S-W., Chen, C-M.: Electromigration effects upon interfacial reactions. JOM 55(2), 62 (2003).Google Scholar
5.Tu, K-N.: Recent advances on electromigration in very-large-scale-integration of interconnects. J. Appl. Phys. 94, 5451 (2003).CrossRefGoogle Scholar
6.Lloyd, J.R., Tu, K-N., Jaspal, J. The physics and materials science of electromigration and thermogration in solders, in Handbook of Lead-Free Solder Technology for Microelectronic Assemblies, edited by Puttlitz, K.J. and Stalter, K.A., (Marcel Dekker, New York, 2004), p. 827.Google Scholar
7.Orchard, H.T., Greer, A.L.: Electromigration effects on compound growth at interfaces. Appl. Phys. Lett. 86, 231906 (2005).Google Scholar
8.Ding, M., Wang, G., Chao, B., Ho, P.S., Su, P., Uehling, T., Wontor, D.A study of electromigration failure in Pb-free solder joints (IEEE International Reliability Physics Symposium Proceedings,43rd, Institute of Electrical and Electronics Engineers,San Jose, CA, 2005), p. 518.Google Scholar
9.Freer, J.L., Morris, J.W. Jr.: Microstructure and creep of eutectic indium/tin on copper and nickel substrates. J. Electron. Mater. 21, 647 (1992).CrossRefGoogle Scholar
10.Shimizu, K., Nakanishi, T., Karasawa, K., Hashimoto, K., Niwa, K.: Solder joint reliability of indium-alloy interconnection. J. Electron. Mater. 24, 39 (1995).CrossRefGoogle Scholar
11.Jones, W.K., Liu, Y., Shah, M., Clarke, R.: Mechanical properties of Pb/Sn, Pb/In and Sn-In solders. Solder. Surf. Mount. Technol. 10, 37 (1998).Google Scholar
12.Kim, D.G., Lee, C.Y., Jung, S.B.: Interfacial reactions and intermetallic compound growth between indium and copper. J. Mater. Sci.- Mater. Electron. 15, 95 (2004).CrossRefGoogle Scholar
13.Huang, C-Y., Chen, S-W.: Interfacial reactions in In-Sn/Ni couples and phase equilibria of the In-Sn-Ni system. J. Electron. Mater. 31, 152 (2002).Google Scholar
14.Sommadossi, S., Gust, W., Mittemeijer, E.: Phase characterisation and kinetic behaviour of diffusion soldered Cu/In/Cu interconnections. Mater. Sci. Technol. 19, 528 (2003).CrossRefGoogle Scholar
15.Chuang, T.H., Huang, K.W., Lin, W.H.: Mechanisms for the intermetallic formation during the Sn-20In-2.8Ag/Ni soldering reactions. J. Electron. Mater. 33, 374 (2004).Google Scholar
16.Wu, H.F., Chiang, M.J., Chuang, T.H.: Selective formation of intermetallic compounds in Sn-20In-0.8Cu ball grid array solder joints with Au/Ni surface finishes. J. Electron. Mater. 33, 940 (2004).Google Scholar
17.Lin, S-K., Chen, S-W.: Interfacial reactions in the Sn-20at.%In/Cu and Sn-20at.%In/Ni couples at 160 °C. J. Mater. Res. 21, 1712 (2006).CrossRefGoogle Scholar
18.Chen, S-W., Lin, S-K.: Effects of temperature on interfacial reactions in -InSn4/Ni couples. J. Mater. Res. 21, 1161 (2006).CrossRefGoogle Scholar
19.Okamoto, H. In-Sn (indium-tin), in Phase Diagrams of Indium Alloys and Their Engineering Applications, edited by White, C.E.T. and Okamoto, H., (ASM International, Materials Park, OH, 1992), p. 255.Google Scholar
20.Lin, S-K., Chung, D-Y., Chen, S-W., Yen, Y-W. unpublished results (2006).Google Scholar
21.Huntington, H.B. Electromigration in metals, in Diffusion in Solid: Recent Development, edited by Nowick, A.S. and Burton, J.J., (Academic Press, New York, 1975), p. 329.Google Scholar
22.Schmitz, G. Goerlich, Tu, K-N.: On the mechanism of the binary Cu/Sn solder reaction. Appl. Phys. Lett. 86, 053106 (2005).Google Scholar
23.Chen, S-W., Wang, C-H. unpublished result (2006).Google Scholar