Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Yu, H. C.
Liu, S. H.
and
Chen, Chih
2005.
Study of electromigration in thin tin film using edge displacement method.
Journal of Applied Physics,
Vol. 98,
Issue. 1,
Chen, Y.H.
Shao, T.L.
Liu, P.C.
Chen, Chih
and
Chou, T.
2005.
Microstructural Evolution During Electromigration in Eutectic SnAg Solder Bumps.
Journal of Materials Research,
Vol. 20,
Issue. 9,
p.
2432.
Kyu-Oh Lee
Morris, J.W.
and
Hua, F.
2005.
Substrate effects on the creep properties of pure Sn solder joints.
p.
17.
Xia, Yanghua
Xie, Xiaoming
Lu, Chuanyan
and
Chang, Junling
2006.
Coupling effects at Cu(Ni)–SnAgCu–Cu(Ni) sandwich solder joint during isothermal aging.
Journal of Alloys and Compounds,
Vol. 417,
Issue. 1-2,
p.
143.
Xia, Yanghua
Lu, Chuanyan
Chang, Junling
and
Xie, Xiaoming
2006.
Interaction of intermetallic compound formation in Cu/SnAgCu/NiAu sandwich solder joints.
Journal of Electronic Materials,
Vol. 35,
Issue. 5,
p.
897.
Ho, C. E.
Yang, S. C.
and
Kao, C. R.
2006.
Interfacial reaction issues for lead-free electronic solders.
Journal of Materials Science: Materials in Electronics,
Vol. 18,
Issue. 1-3,
p.
155.
Xia, Yanghua
Lu, Chuanyan
and
Xie, Xiaoming
2007.
Effect of Interfacial Reactions on the Reliability of Lead-Free Assemblies after Board Level Drop Tests.
Journal of Electronic Materials,
Vol. 36,
Issue. 9,
p.
1129.
Ho, C. E.
Yang, S. C.
and
Kao, C. R.
2007.
Lead-Free Electronic Solders.
p.
155.
Yoon, Jeong-Won
and
Jung, Seung-Boo
2008.
Effect of surface finish on interfacial reactions of Cu/Sn–Ag–Cu/Cu(ENIG) sandwich solder joints.
Journal of Alloys and Compounds,
Vol. 448,
Issue. 1-2,
p.
177.
Tseng, H.W.
and
Liu, C.Y.
2008.
Evolution of Ag3Sn compound formation in Ni/Sn5Ag/Cu solder joint.
Materials Letters,
Vol. 62,
Issue. 23,
p.
3887.
Yen, Yee-Wen
Tseng, H. W.
Zeng, K.
Wang, S. J.
and
Liu, C. Y.
2009.
Cross-Interaction Between Au/Sn and Cu/Sn Interfacial Reactions.
Journal of Electronic Materials,
Vol. 38,
Issue. 11,
p.
2257.
Wu, W.H.
Chung, H.L.
Chen, C.N.
and
Ho, C.E.
2009.
The Influence of Current Direction on the Cu-Ni Cross-Interaction in Cu/Sn/Ni Diffusion Couples.
Journal of Electronic Materials,
Vol. 38,
Issue. 12,
p.
2563.
Liu, C. Y.
Tseng, H. W.
and
Song, J. M.
2010.
Variation of Mechanical Property and Microstructure across Sn Solder Joint in Cu/Sn/Ni Structure.
Electrochemical and Solid-State Letters,
Vol. 13,
Issue. 9,
p.
H298.
Wu, W. H.
Chung, H. L.
Chen, B. Z.
and
Ho, C. E.
2010.
Critical Current Density for Inhibiting (Cu,Ni)6Sn5 Formation on the Ni Side of Cu/Solder/Ni Joints.
Journal of Electronic Materials,
Vol. 39,
Issue. 12,
p.
2653.
Zeng, Kejun
and
Holdford, Becky
2010.
Effect of Cu content on the interfacial reliability of SnAgCu solder joints.
p.
652.
Liu, Chao Sheng
Ho, Cheng En
Peng, Cheng Sam
and
Kao, C. Robert
2011.
Effects of Joining Sequence on the Interfacial Reactions and Substrate Dissolution Behaviors in Ni/Solder/Cu Joints.
Journal of Electronic Materials,
Vol. 40,
Issue. 9,
p.
1912.
Huang, Y.S.
Hsiao, H.Y.
Chen, Chih
and
Tu, K.N.
2012.
The effect of a concentration gradient on interfacial reactions in microbumps of Ni/SnAg/Cu during liquid-state soldering.
Scripta Materialia,
Vol. 66,
Issue. 10,
p.
741.
Zeng, Kejun
Pierce, Mike
Miyazaki, Hiroshi
and
Holdford, Becky
2012.
Optimization of Pb-Free Solder Joint Reliability from a Metallurgical Perspective.
Journal of Electronic Materials,
Vol. 41,
Issue. 2,
p.
253.
Pan, Song
Huang, Mingliang
Zhao, Ning
Zhou, Shaoming
and
Zhang, Zhijie
2012.
Dissolution of substrates in line-type Cu/Sn/Cu and Cu/Sn/Ni interconnects under current stressing.
p.
1399.
Lin, C. K.
An Tsao, Wei
Liang, Y. C.
and
Chen, Chih
2013.
Temperature-dependent failure mechanism of SnAg solder joints with Cu metallization after current stressing: Experimentation and analysis.
Journal of Applied Physics,
Vol. 114,
Issue. 11,