Reliable chronologies in ice cores and snow pits from many alpine glaciers in latitudes between 60° N and 60° S are often difficult to establish owing to problems with annual-layer counting. Problems arise from melting, wind erosion and the negligible amount of precipitation in some seasons, all of which tend to obscure the seasonal variations in δ18O and chemical concentrations that are typically used to date ice cores. However, alpine glaciers contain many species of pollen grains that peak at particular times of the year. We used the peaks in Betulaceae, Pinus, Artemisia and a combination of Abies and Picea pollen species to determine the four seasonal layers of a snow pit on Belukha glacier in Russia’s Altai Mountains. Comparing the pollen-dated profiles with wind and precipitation records allows us to determine where a seasonal layer is missing. Thus, the pollen-dating method described here may be a useful tool to measure the annual snow deposition on alpine glaciers, even when some seasonal layers are eroded by wind or missing due to negligible precipitation.

A total of 11 ice cores to a maximum depth of 460 m have been obtained over the past 3 years from high-altitude glaciers on the saddle of Mount Bona and Mount Churchill in Alaska (designated B–C), and on Quelccaya ice cap and Nevado Coropuna in Peru. Ice coring was conducted using an intermediate-depth drilling system. The system includes an electromechanical drill (EMD) and an ethanol thermal electric drill (ETED). The EMD permitted an average ice-core production rate (ICPR) of 7.0 m h−1 down to 150 m. An average ICPR of 2 m h−1 to 460 m depth was possible with the ETED. The quality of the B–C ice cores is better than that of cores previously drilled with an EMD and ETED system. A new cutter design, drilling with a lubricant/cutting fluid and a new anti-torque assembly were tested in the laboratory and in glacier boreholes. We examine the performance of the drills in cold and temperate ice and in clean and particle-laden ice. The influence of the ethanol drilling fluid on ice-core isotopic, ionic and dust composition is discussed.